Narrow Results:

• 

  Connectronics DIN 1.0/2.3 Connector for Belden 1855A/Mini RG59 3-Piece

  The new Connectronics DIN 1.0/2.3 RF coaxial connector for Belden 1855A, Gepco VDM230, or equivalent mini RG59 Digital SDI coaxial cable. Our newest connector has upgraded performance to meet future needs with a return loss of >10dB out to 4.5 GHz. It is designed to mate securely with a broad range of compact jackfields and high density broadcast router panels such as Harris, Miranda and Evertz.

  These high performance connectors feature a Nickel Shell & Gold Plated Center Contact/Pin and are capa

   

  Read More

  Item #: DIN-1023-1855

  Availability: In Stock

  Our Price: $4.49

  Add to Wishlist
• 

  Connectronics 5-Channel Cable Ramp Crossover & Cable Protector - Black with Yellow Lid

  A cost effective carry-and-go 5-channel cable ramp crossover for location work where vehicle and pedestrian traffic would pose harm to your cable investment. Serious weight capacity - up to 20,000 lbs. - withstands even the largest trucks and gear transporters. The CRSX-2 is molded from vulcanized rubber with a PVC lid and an anti-slip ribbed surface.

  Installation is fast and simple. Each channel measures 1.5" wide x 1.25" high - large enough to hold SMPTE cables, audio snakes and communication w

   

  Read More

  Item #: CRSX-2

  Availability: In Stock

  Our Price: $119.99

  Add to Wishlist
• 

  Connectronics CTX-TRIAX-TXT Triax Cable Tester

  A Tool No Truck Should Be Without!

  Save thousands of dollars in overtime and frustration by verifying triax cable status right in the field - not back in your shop. You can test for opens and shorts between the center conductor and inner and outer shields using the CTX-TRIAX-TXT battery-powered cable tester. The separate base and remote unit design allows for testing cables that are already installed.

  The two piece tester includes a transmitter (male) and a receiver unit (female) with Kings Tri-Lo

   

  Read More

  Item #: CTX-TRIAX-TXT

  Availability: In Stock

  Our Price: $569.95

  Add to Wishlist
• 

  TecNec BF-BF BNC Female to Female Barrel 75 Ohm

  Exclusive Nickel Over Brass Design
  Non-corrosive
  Better conductivity
  Longer lasting
  Why buy cheap imports that don't stand up to the daily rigors of field & studio abuse when a better adapter is available at a better price!
  Quantity Discounts Apply, Please Call For Pricing!

   

  Read More

  Item #: BF-BF

  Availability: In Stock

  Our Price: $2.69

  Add to Wishlist
• 

  Connectronics Punched Unloaded 16 Point D-Series XLR Rack Panel - 1 RU

  Design your own patch panel using any D-Style chassis mount connector with the Connectronics 16X. Let's you customize your workflow and swap out any connector on your own. Use DBA filler plates to cover blank holes.

  • 1RU Panel
  • Black Textured Power Coated Panel
  • Punched to work with any D-Series chassis connectors

   

  Read More

  Item #: 16X-1

  Availability: In Stock

  Our Price: $59.00

  Add to Wishlist
• 

  Connectronics 1RU Universal Blackmagic Design Mini Converter Rackmount

  Mount up to 4 Blackmagic Mini Converters side-by-side in this universal 1RU rackmount. Unique slide rail mount allows you to adjust each inidvidual Blackmagic Mini Converter to either front or recessed position. Order multiple BLACKRACK-1 and stack them for multiple Mini Converter rackmount requirements.

  Made of high strength steel with durable powder coat finish for years of use.

  • Includes Mounting Hardware
  • 1RU Mounts up to 4 Mini Converters
  • Adjustable Rails for Flush or Recessed Mounting
    
    Fits all s

   

  Read More

  Item #: BLACKRACK-1

  Availability: In Stock

  Our Price: $71.95

  Add to Wishlist
• 

  Connectronics 3RU High Density Universal Blackmagic Design Mini Converter Rackmount

  Mount up to 10 Blackmagic Mini Converters side-by-side in this universal 3RU rackmount. Blackmagic Mini Converters attach with included thumb screws for quick and easy installation. Rear extended mount plate for power supply(s), cable management and outlet strip mounting.

  Made of aircraft aluminum for years of field use. Patent pending.

  • Includes Mounting Hardware
  • 3RU Mounts up to 10 Mini Converters
  • High Density Professional Rack Mount Solution
  • Applications include News gathering, Sports production, R
  • 
    
    

   

  Read More

  Item #: BLACKSTACK-10RM

  Availability: In Stock

  Our Price: $89.95

  Add to Wishlist
• 

  Connectronics TN-RD2 Rack Drawer with Key Lock - 2RU

  The Connectronics TN-RD2 19" (2RU) Rack Drawer is the durable choice that won't empty your pockets! Lightweight 18 Ga. Steel/Aluminum construction with full-extension ball bearing slides. The TN-RD2 delivers the superior quality you demand at almost half the price of others on the market.

  • Heavy Duty 18Ga Steel Construction
  • 19" x 3" (2RU) Overal Dimensions
  • 14.5" Inside Depth
  • Easy Action Slam Latch
  • Key Lock Included

   

  Read More

  Item #: TN-RD2

  Availability: In Stock

  Our Price: $65.99

  Add to Wishlist
• 

  75 Ohm 16 Point Patchbay with BNC Feed-thru Connectors

  • Choice of 16 or 32 points!
  • Organize and route your video cables easily with Connectronics "straight-thru" panels
  • Panels feature isolated BNC-BNC jacks mounted on 19" wide rack panels
  • 751/2 BNC specification
  • Best Buy!

   

  Read More

  Item #: 16XB

  Availability: In Stock

  Our Price: $99.95

  Add to Wishlist
• 

  16-Port AES/EBU Impedance Transformer Patch Panel BNC Female to Rear XLR Male

  Connectronics digital audio patchbays, loaded with High Quality Connectronics digital converters provide an excellent impedance transformer at a reasonable cost for meeting the needs between analog and digital applications. Their use also allows for longer cable runs via unbalanced coaxial lines rather than twisted pair cables that present high attenuation values at the relevant frequencies.

  16-Port AES/EBU Impedance Transformer 75 Ohm BNC Female Input on Front of patch panel to 110 Ohm XLR Male

   

  Read More

  Item #: TN-AESEBU16M

  Availability: Usually ships in 3-10 business days

  Our Price: $448.95

  Add to Wishlist
• 

  Connectronics PBXLR-12COMBO 24-Point XLR & 1/4-TRS Combo to XLR & 1/4-TRS Combo Feed-Thru Patch Panel

  1/4" TRS and 3 pin XLR connectors are probably the most widely used connectors on the pro audio playing field, either in the studio or on stage. When Neutrik came out with the NCJ6FI-S combo connector it was game changer but have you ever tried to wire them? If you have, then you know it's not an easy process. The Markertek Custom Shop has taken the hard part out of the equation and have placed 24 of these awesome connectors into a 1 RU metal enclosure. You now have any combination of XLR or 1/4
  

   

  Read More

  Item #: PBXLR-12COMBO

  Availability: In Stock

  Our Price: $289.95

  Add to Wishlist
• 

  Connectronics US1 Utility Rack Shelf 1 Space (1RU) High x 11-Inch Deep

  The Connectronics US1 19" 1RU Utility Rack Shelf is constructed of ultra-rugged 16-Gauge black powder-coated steel. The quick and EZ way to rack mount equipment that is not normally rack mountable. One piece heavy duty construction, holds up to 33 lbs.

  • Height: 1.75" (1RU)
  • Shelf Area: 17.375"W x 11"D
  • Weight Capacity: 33 Lbs.
  • Product Weight: 4.29 Lbs.

   

  Read More

  Item #: US1

  Availability: In Stock

  Our Price: $28.99

  Add to Wishlist
• 

  8-Port AES/EBU Impedance Transformer Patch Panel BNC Female to Rear XLR Male

  Connectronics digital audio patchbays, loaded with High Quality Connectronics digital converters provide an excellent impedance transformer at a reasonable cost for meeting the needs between analog and digital applications. Their use also allows for longer cable runs via unbalanced coaxial lines rather than twisted pair cables that present high attenuation values at the relevant frequencies.

  8-Port AES/EBU Impedance Transformer 75 Ohm BNC Female Input on Front of patch panel to 110 Ohm XLR Male O

   

  Read More

  Item #: TN-AESEBU8M

  Availability: In Stock

  Our Price: $233.60

  Add to Wishlist
• 

  TecNec B-BFRA 75 Ohm BNC Female to Male Right Angle Adapter

  • Exclusive Nickel Over Brass Design
  • Non-corrosive
  • Better conductivity
  • Longer lasting
  • Why buy cheap imports that don't stand up to the daily rigors of field & studio abuse when a better adapter is available at a better price!
  • Quantity Discounts Apply, Please Call For Pricing!

   

  Read More

  Item #: B-BFRA

  Availability: In Stock

  Our Price: $4.49

  Add to Wishlist
• 

  Connectronics TRX2BNCF Triax Female to BNC Female Adaptor

  Super heavy duty Triax to BNC adapters. Fully compatible with Kings. Features a BNC female on one end and Triax Female on the other. ( Note: does not pass power )

   

  2 Genders Available

  Item #: TRX2BNCF

  Availability: In Stock

  Our Price: $119.99

  Add to Wishlist
• 

  Connectronics 16 point 2GHz BNC Feed-thru Patchbay Panel for HD-SDI and SDI

  True 75ohm BNC Feed-Thru panels organize and route your video cables easily. Panels feature isolated ultra wideband Canare BNC 2GHz barrels for all HDTV and SDI patch panel applications.

   

  2 Patch Points Available

  Item #: 16XB-HD

  Availability: In Stock

  Our Price: $149.95

  Add to Wishlist
• 

  ENG Duplex Boom Mic Cable 50ft

  Canare pliable 2 channel duplex cable that is self-contained and easy to work with. Panel end of boom cable has Neutrik XLR 3-pin male connector for microphone output and Neutrik XLR 1/4" male phone plug to return audio to the boom/fishpole operator. Boom end of cable is small box with steel belt clip. Box has XLR 3-pin female input for the mic and a 1/4" headphone jack.

   

  4 Lengths Available

  Item #: ABOOM50

  Availability: Usually ships in 3-10 business days

  Our Price: $209.95

  Add to Wishlist
• 

  440 Nut with Star Washer - 100 Pack

  4-40 thread hardware for mounting all chassis connectors in panels & plates. Box of 100 screws. Order nuts and washers separately. Use counter sunk screws for mounting connectors on front of panel. Use pan head for back panel mounting.

   

  Read More

  Item #: NUT-CMT

  Availability: In Stock

  Our Price: $8.99

  Add to Wishlist
• 

  NXLP-1 Punched Patch Panel for 8 Neutrik D-Type Connectors - 1 RU

  Create your own custom patch panel with these ultra heavy duty rack panels. Holds up to 8 (1 RU) or 16 (2 RU) connectors with a Neutrik D-Type mounting configuration.

   

  2 Sizes Available

  Item #: NXLP-1

  Availability: In Stock

  Our Price: $29.95

  Add to Wishlist
• 

  16pt. DB9F-DB9F Feedthru Patchbay

  Patch panels feature female DB9 to female DB9 feed-thru connectors. Excellent for a serial data (RS422 or RS232) patching requirements. Mounted on 16 gauge rack mount panel. Perfect for all broadcast/network applications.

   

  Read More

  Item #: PB16-D9D9

  Availability: In Stock

  Our Price: $183.15

  Add to Wishlist
• 

  TecNec SP-PF 1/4 Inch Phone Male to RCA Female

  • Exclusive Nickel Over Brass Design
  • Non-corrosive
  • Better conductivity
  • Longer lasting
  • Why buy cheap imports that don't stand up to the daily rigors of field & studio abuse when We offer a better adapter at a better price!
  • Quantity Discounts Apply, Please Call For Pricing !!

   

  Read More

  Item #: SP-PF

  Availability: In Stock

  Our Price: $1.49

  Add to Wishlist
• 

  Connectronics CTX-16XFXM XLR Feedthrough 1RU Patch Panel 16-F Front / 16-M Rear

  A low cost feed through XLR panel featuring the popular Connectronics D-Type chassis mount barrel connector series. XLR Female on Front & XLR Male on Rear. No rear soldering required so installation time is cut in half!

   

  3 Patch Panels Available

  Item #: CTX-16XFXM

  Availability: In Stock

  Our Price: $115.95

  Add to Wishlist
• 

  Connectronics Unloaded 16 Point 1RU Patch Panel

  The Connectronics 16CJ and 32CJ AV Bulkhead panels are ideal for the multimedia facility that needs the flexibility to design its own panel. These pre-punched panels accommodate are large variety of Canare footprint BNC, RCA, F and Cannon ITT type XLR connectors on the same panel. Panels are finished in matte black powder coat and have tapped screw holes for connector mounting. Designation ID clear plastic covers. Compare to Canare 161U and 162U.

  • Canare BCJ- Series BNC Panel Mounts
  • Canare FJ- Seri

   

  2 Patch Points Available

  Item #: 16CJ

  Availability: In Stock

  Our Price: $45.85

  Add to Wishlist
• 

  Connectronics CAT-5E RJ45 Female-Female Feedthru D Series Panel Mount

  World's First Chassis Mount RJ45 To RJ45 Feed-Thru Barrel Connectors That Fit Any Standard XLR Audio Rack Panel!

  Add Full RS422 & RS232 Machine Control & Multimedia Patching To Your Existing Audio/Video Panels!

  Full Serial Interface patching via handy RJ45 inputs is now available to your existing audio & video patch panels. Using standard XLR screw hole alignment, these new connectors mount right in your existing patch panels. Both RS422 and RS232 patching can be used in any combination within you

   

  2 Types Available

  Item #: RJ45-RJ45CM

  Availability: In Stock

  Our Price: $9.95

  Add to Wishlist
• 

  Connectronics HDMI 1.3 Feed Through D Series Chassis Mount Connector

  The TN-HDMICM is a Gold Plated HDMI 1.3 Panel Mount Adapter that is designed to mount in a standard D Style Punch. Using this common footprint assures the easy use of the TN-HDMICM with many of the prefabricated wall plates and panels on the market today.

   

  Read More

  Item #: TN-HDMICM

  Availability: In Stock

  Our Price: $8.99

  Add to Wishlist

Newsletter Sign Up

Weekly email with exclusive deals, unique new products, how-to videos and so much more!

Download the Newest Catalog!

• A Must for all Broadcast & AV Professionals
• Exclusive & Custom Solutions
• The Best New Products
• Latest Industry Trends