-
Item# JJ-TD-600D3
The Jony TD-600D3 3 Point Dolly with 3 Adjustable Feet is an all-aluminum dolly with a load capacity of 600 lbs and can be used for fixed applications such as a house of worship or stadium where you do not need to move your rig. The dolly features swiveling stirrups, which securely hold the tripod legs. It can be folded and locked for easy transport and storage.
You can replace the feet with 9" rubber tires as an option where mobility is required such as parking lots, golf courses, or...

Our Price: $627.95
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# JJ-TD-600LO
Add Another Level of Stability to Your Tripod
The JonyJib TD-600LO adds another level of stability to your tripod. These easily slide into the end of each dolly leg and allow you to raise or lower each side independently. These also raise the TD-600PW off the deck for rock solid stability when you get to where you're going! This also gives you three or four point leveling of your rig. When it's time to move simply retract the legs, swivel them 90 degrees and keep rolling! These are...
Our Price: $120.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# JJ-TD-600PW
The JonyJib TD-600PW adds wheel(s) to your dolly. These all-terrain 9" pneumatic rubber tires swivel for easy turns and mobility. These are priced individually and do not have brakes. (see Leveling Outrigger for braking).
Specifications: Payload: 250 lbs each
Wheel Diameter: 4 inches
Tire Diameter: 9 inches
Tire Width: 4 inches
Tire Tread: Slick

Our Price: $225.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# JJ-TD-600ST
Quad Skate Wheel Truck
The JonyJib TD-600ST adds track wheels to your dolly. These solid billet aluminum heavy duty trucks have 4 wheels each and will smoothly glide on straight or curved track. 1/2"-13 stem bolt swivels on dual bearings and includes 2 washers and nut for attaching to your dolly or project.
Specifications: Payload: 200 lbs
Wheel Ball Bearings: Yes - 13
Tire Diameter: 52mm
Tire Width: 30mm
Tire Tread: Grooved
Our Price: $120.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# JJ-MTRHEADHDMINI
Motorized heads provide full 360 degree, smooth pans and tilts for your camera. The joystick fitted controller mounts to the jib rear control center and has speed control and ramping control knobs. This MotorHead HD Mini unit carries cameras up to 10 lbs. Mounting is via a 1/4" knob bolt. This unit mounts in either underslung or overslung mode.

Our Price: $1,869.95
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# JJ-PRO15
The JonyJibPro 15 is a 4 section jib giving 15 feet of camera height. It includes 4 mast sections, camera platform, leveling cable, pivot bracket, Mitchell mounting hub and rear control and weight mounting center. This jib has 2 selectable fulcrum points.
Tripod required, not included.

Our Price: $4,919.95
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# JJ-VB
The JonyJib Vertical Brake from Jony attaches to all the JonyJib models and provides a vertical lock for the mast. The mast can be released by simply loosening the knob, and tightening the knob locks the mast in place. The brake is well suited for stop motion and other types of photography where it is imperative the mast does not move.
Specifications: Package Weight: 1 Lb
Box Dimension: 17 x 7 x 2 Inch

Our Price: $139.95
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# JONYJIB-PRO24
The Jony JibPro 24 is a modular jib arm built to be lightweight and portable without sacrificing functionality. The design revolves around a series of 4' modules that provide 3' of extension each (since there is a 1' overlap when the modules are connected). The JibPro can be extended all the way up to 24' when using all 8 modules. This model comes with 8 modules, for a total of 24' in length. All the modules of the jib arm can be stored in a 48" tripod bag.

Our Price: $6,899.95
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# JONYJIB-WK-L
The Jony JonyJib Wiring Kit 30' is a wiring kit for the JonyJib camera crane system. This kit offers 30' of Pan & Tilt, Zoom & Focus, Power, and video cable bundled in a black braided mesh. It offers security and convenience in one cable package.

Our Price: $329.95
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# JONYJIB2-12
The JonyJib2 12 is a 3 section jib giving 12 feet of camera height. It includes 3 mast sections, camera platform, leveling cable, pivot bracket, 100mm mounting hub, rear control and weight mounting center. This jib has 2 selectable fulcrum points. (Tripod & Scion not included)
The JonyJib2 is expandable from 9’ (2 sections) to 18’ (5 sections) in 3’ increments. Each extension tube is 4’ long giving a 1’ overlap between sections. Since each section slides out, pulled from the previous sections,...

Our Price: $2,749.95
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# JONYJIB2-15
The JonyJib2 15 is a 4 section jib giving 15 feet of camera height and 9-10 feet of reach. It includes 4 mast sections, camera platform, leveling cable, pivot bracket, 100mm mounting hub and rear control and weight mounting center. It also comes with an articulating mounting bracket with 1/4" screw for your LCD monitor. This jib has 2 selectable fulcrum points. 30 lb. camera capacity (100mm bowl style tripod, dolly and counterweights not included)
The JonyJib2 is expandable from 9' (2 sections)...

Our Price: $3,409.95
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# JONYJIB2-18
The JonyJib2 18 is a 5 section jib giving 18 feet of camera height and 12-13 feet of reach. It includes 5 mast sections, camera platform, leveling cable, pivot bracket, 100mm mounting hub and rear control and weight mounting center. It also comes with an articulating mounting bracket with 1/4" screw for your LCD monitor. This jib has 2 selectable fulcrum points. 30 lb. camera capacity (100mm bowl style tripod, dolly and counterweights not included)
The JonyJib2 is expandable from 9' (2 sections)...

Our Price: $4,069.95
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# JONYJIB2-9
The JonyJib2 09 is a 2 section jib giving 9 feet of camera height and 3-6 feet of reach. It includes 2 mast sections, camera platform, leveling cable, pivot bracket, 100mm mounting hub and rear control and weight mounting center. It also comes with an articulating mounting bracket with 1/4" screw for your LCD monitor. This jib has 3 selectable fulcrum points. 30 lb. camera capacity (100mm bowl style tripod, dolly and counterweights not included)
The JonyJib2 is expandable from 9' (2 sections)...

Our Price: $2,089.95
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# JONYJIBPROJJU12U
This kit comes with the extension tubes and hardware necessary to extend the JonyJib Pro an additional three feet.
Upgrade your JonyJib Pro 9' jib to a JonyJib Pro 12' unit with this kit which includes: (1) 4 foot mast section C, (2) through-bolts washers and nuts and a ring pin.

Our Price: $659.95
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# JONYJIBPROJJU15U
This kit comes with the extension tubes and hardware necessary to extend the JonyJib Pro an additional three feet.
Upgrade your JonyJib Pro 12' jib to a JonyJib Pro 15' unit with this kit which includes: (1) 4 foot mast section D, (2) through-bolts washers and nuts and a ring pin.

Our Price: $659.95
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# JONYJIBPROJJU18U
2 Types AvailableThis kit comes with the extension tubes and hardware necessary to extend the JonyJib Pro an additional three feet.
Upgrade your JonyJib Pro 15' jib to a JonyJib Pro 18' unit with this kit which includes: (1) 4 foot mast section E, (2) through-bolts washers and nuts and a ring pin.
Read More
Our Price: $659.95
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# JONYJIBPROJJU21U
This kit comes with the extension tubes and hardware necessary to extend the JonyJib Pro an additional three feet.
Upgrade your JonyJib Pro 18' jib to a JonyJib Pro 21' unit with this kit which includes: (1) 4 foot mast section F, (2) through-bolts washers and nuts and a ring pin.

Our Price: $659.95
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# JONYJIBPROJJU24U
This kit comes with the extension tubes and hardware necessary to extend the JonyJib Pro an additional three feet.
Upgrade your JonyJib Pro 21' jib to a JonyJib Pro 24' unit with this kit which includes: (1) 4 foot mast section G, (2) through-bolts washers and nuts and a ring pin.

Our Price: $659.95
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# JONYJIBPROJJU27U
This kit comes with the extension tubes and hardware necessary to extend the JonyJib Pro an additional three feet.
Upgrade your JonyJib Pro 24' jib to a JonyJib Pro 27' unit with this kit which includes: (1) 4 foot mast section H, (2) through-bolts washers and nuts and a ring pin.

Our Price: $659.95
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# JONYJIBPROJJU30U
This kit comes with the extension tubes and hardware necessary to extend the JonyJib Pro an additional three feet.
Upgrade your JonyJib Pro 27' jib to a JonyJib Pro 30' unit with this kit which includes: (1) 4 foot mast section I, (2) through-bolts washers and nuts and a ring pin.

Our Price: $659.95
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# JJ-TD-600T
The TD-600T 3 leg, all aluminum tripod with leg levelers sports a solid aluminum (not cast) Mitchell mounting base which supports any Mitchell mount style tripod head as well as the JonyJib Pro Mounting Hub. Leg leveling is as easy as twisting the bottom of the leg to raise or lower it.
Features: Supports Up to 600 lbs (272kg)
Leveling Legs
Solid Aluminum Base
2.75" Mitchell-style Mount Specifications: Material: Aluminum
Payload: 600 lbs.
Leg...
Our Price: $1,149.95
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# JJ-AEX8F
2 Types AvailableThis 8 pin zoom cable adapter for the ZR3000 or Fujinon (Canon) professional controllers allow you to remotely control the zoom feature of your Sony EX1 or EX3. This adapter cable also supports the record start/stop and review features of these cameras if your controller is equipped with these features. Adapter is also compatible with the popular Varizoom Pro-F (Pro-C) controllers.
Read More
-
Item# JJ-MOTORHEADHD
These units provide full 360+ degree, smooth pans and tilts for your camera. The proportional joystick fitted controller mounts to the jib arm and has overall speed and ramping knobs as well as directional preference switches. The MotorHead HD unit carries cameras up to 30 lbs. with extra clearance for matte boxes and long lenses. Mounting is via (1) 3/8" knob bolt. This unit mounts in either underslung or overslung mode.
