-
Item# LEC-TM400-BLK21
The Lectrosonics TM400 system was designed to provide the ideal link between calibrated test microphones and measurement equipment such as SIM®, SIA SMAART Live®, TEF® or other systems. By using a radio link, long cables can be eliminated thus saving time and providing opportunities for additional measurements to increase accuracy. The microphone can even be moved around in the venue while the audience is present - something that is impossible with a cabled measurement...
Our Price: $2,611.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Item# LEC-M152-5P
The M152 is a high performance microphone with heavily suppressed mechanical noise for critical applications. A wide, flat frequency response is augmented by a 2 or 3 dB bump in the upper octaves to add a crisper sound. The mic capsule should be positioned in the center of the talker's chest, not to either side, as high up as is practical. In windy conditions, it can be placed underneath a collar or thin clothing to reduce wind noise, although this will dull the sound somewhat.
Specifications:...
-
Item# LEC-IFBR1B-A1
Wireless IFB (interruptible fold back) systems are used for talent cueing and crew communications in broadcast and motion picture production. In other cases, the IFB system is used by directors and other management to monitor program audio during a production. The Lectrosonics IFBR1B-A1 470.100 - 537.575 Mhz receiver provides simplicity and flexibility in a package that is intuitive for untrained users to operate. Despite its tiny size, the new IFBR1B receiver offers excellent performance...
-
Item# LEC-LT-A1
The LT transmitter offers a full set of professional features in a compact, rugged package. The unit is compatible with all Digital Hybrid Wirelessr receivers and even some from other manufacturers, making it comfortable in a wide variety of applications from video production to theater, stage and house of worship.
The LT can be configured to operate as a "one touch" device with a single power on/off switch on the top panel, or with full access to all operational parameters using the side panel...
Our Price: $1,394.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Item# LEC-IFBR1B-B1
Wireless IFB (interruptible fold back) systems are used for talent cueing and crew communications in broadcast and motion picture production. In other cases, the IFB system is used by directors and other management to monitor program audio during a production. The Lectrosonics IFBR1B-B1 537.600 - 614.375 Mhz receiver provides simplicity and flexibility in a package that is intuitive for untrained users to operate. Despite its tiny size, the new IFBR1B receiver offers excellent performance...
Our Price: $804.00
Availability: Extended Lead Time. Email, Chat or Call Us for more details.
Add to Wish List-
Item# LEC-DNT22
The LECTROSONICS DNT22 I/O Interface is a 2in/2out, cost-effective way to add up to two channels (in and out) of Dante™ audio to an existing Dante-based networked audio system. The DNT22's small form factor and PoE power capability make it easy to put Dante connectivity wherever it's needed - near the audio source or sink thereby eliminating costly and interference prone analog wiring.
Note: Power supply not included. No DC power is required if the DIO2x2...
-
Item# LEC-CHSIFBR1B
This Lectrosonics CHSIFBR1B battery charging station provides a convenient and organized means of recharging any combination of up to 4 LB-50 batteries or IFBR1B receivers. Each charging module may be daisy-chained to 3 additional modules using a single DCR5/A9U power supply for a total of up to 16 units charging at once (LB50's and/or IFBR1Bs). The CHSIFBR1B charging station features an individual LED on each charging module. Red indicates the battery is charging and green indicates the...
-
Item# LEC-SSMCVR
The SSMCVR tough silicone cover protects the SSM transmitter from moisture and dust. The pliable material and the two-part design make it easy to install and remove. Cutouts for the antenna and input jack and the raised dome for the LED provide a snug fit.
-
Item# LEC-IFBR1BBCSL
Lectrosonics IFBR1BBCSL is a Spring Loaded Beltclip for IFBR1B Receiver
-
Item# IFBR1B-941-KIT
Wireless IFB (interruptible fold back) systems are used for talent cueing and crew communications in broadcast and motion picture production. In other cases, the IFB system is used by directors and other management to monitor program audio during a production. The Lectrosonics IFBR1B-941 with Battery Charger Kit 941.525 - 951.975 Mhz receiver provides simplicity and flexibility in a package that is intuitive for untrained users to operate. Despite its tiny size, the new IFBR1B receiver offers...
-
Item# IFBR1B-941-KIT-2
Wireless IFB (interruptible fold back) systems are used for talent cueing and crew communications in broadcast and motion picture production. In other cases, the IFB system is used by directors and other management to monitor program audio during a production. The Lectrosonics IFBR1B-941 with Battery Charger Kit 952.875 - 956.225 Mhz receiver provides simplicity and flexibility in a package that is intuitive for untrained users to operate. Despite its tiny size, the new IFBR1B receiver offers...
-
Item# IFBR1B-941-KIT-3
Wireless IFB (interruptible fold back) systems are used for talent cueing and crew communications in broadcast and motion picture production. In other cases, the IFB system is used by directors and other management to monitor program audio during a production. The Lectrosonics IFBR1B-941 with Battery Charger Kit 956.475 - 959.825 Mhz receiver provides simplicity and flexibility in a package that is intuitive for untrained users to operate. Despite its tiny size, the new IFBR1B receiver offers...
-
Item# LEC-27258
Lectrosonics 27258 is a Wire Belt Replacement Clip for IFBR1B Receivers.
-
Item# LEC-A500RA21
The A500RA21 is a UHF flexible whip antenna with Right-Angle BNC for IFBT4 Block 21. The R400A is a high performance, triple-conversion, frequency synthesized UHF receiver fully compatible with all Lectrosonics 400 Series Digital Hybrid Wireless transmitters, 200 Series and 100 Series analog transmitters and Lectrosonics IFB transmitters, plus some analog transmitters from other manufacturers. Features: Specifications: Operating Frequency: Block 21: 537.600 - 563.100 MHz
Connectrion:...
-
Item# LEC-A8U-24
UHF antenna, straight BNC. Specify block such as Lectrosonics A8U-24 for block 24. These antennas can be used one block above and below the specified block. Color coded tip per ANSI resistor code.
-
Item# LEC-ALP500
Standard remote antenna ideal for fixed applications. The ALP Series antennas are a Log Periodic Dipole Array (LPDA) design that provides a useful directional pattern over a broad frequency bandwidth.
Our Price: $331.88
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Item# LEC-ALP620
The Lectrosonics ALP620 is a Skeletal remote antenna designed for decreased wind loading. The ALP Series antennas are a Log Periodic Dipole Array (LPDA) design that provides a useful directional pattern over a broad frequency bandwidth.
The ALP Series antennas are a Log Periodic Dipole Array (LPDA) design that provides a useful directional pattern over a broad frequency bandwidth. Many "gain antennas" (those designs with a directional pattern) are limited in bandwidth, making them awkward...
-
Item# LEC-ALP690
The Lectrosonics ALP690 is a high-performance LPDA (log periodic dipole array) antenna with a bypassable, built-in RF amplifier for use with wireless microphone receivers in location or studio production. The design delivers +4 dBd of passive gain in a directional pattern to extend operating range, and, when DC power is applied, the amplifier applies gain to overcome loss in long coaxial cable runs. By offering both active and passive operation modes, the ALP690 can be used as a receiver...
-
Item# LEC-AMJ-19
The Lectrosonics AMJ Color Coded Whip Antenna is a replacement antenna for the SM, UM200, UM400, UM190, UM195, UM400a and SRa beltpack transmitters. The antenna features a standard stainless steel connector SMA connector and nearly indestructible steel wire.
Features: Block 19 / 486.400 to 511.900 MHz
Compatible with SM, UM200, UM400, UM190
Compatible with UM195, UM400a, SRa
Specifications: Frequency: Block 19 / 486.400 to 511.900 MHz
Packaging...
-
Item# LEC-AMM-23
The Lectrosonic AMM are Color coded antennas for UM belt packs, newer SM series belt-pack units and also newer SR receivers. Specify the block such as AMM-23. Construction is of nearly indestructible steel wire rope with a stainless steel connector Features: Specifications:
-
Item# LEC-AMM21
The Lectrosonics AMM-21 Antenna is designed for 200 and 400 Series UHF beltpack transmitters that operate on Frequency Block 21. Features: For 200 and 400 Series Transmitters
Colored Caps Help in Organization Specifications: Package Weight: 0.01 lb
Box Dimensions (LxWxH): 7.0 x 4.0 x 0.1"
-
Item# LEC-C150
Mic clip for M150 and M152 lavaliere mics. The secondary clip holds the cable of the mic rather than the body of the mic itself and can be rotated to different angles.
-
Item# LEC-DBSM-A1B1
2 Battery AvailableThe DBSM single-AA and DBSMD dual-AA digital bodypack transmitters are the latest in the long and hugely successful SM Series of miniature transmitters and are part of the Lectrosonics digital ecosystem. The new models feature a tuning range covering the A1 and B1 bands from 470-608 MHz or up to 614 MHz for the international E01 versions. The new transmitters include high-efficiency circuitry for extended run time, and offer RF power selections at 10, 25 and 50 mW. In addition, a new, selectable...
Read More
-
Item# LEC-DBU
The Lectrosonics DBu transmitter is a 4th generation design with specially developed, high-efficiency digital circuitry for extended operating time on two AA batteries. The transmitter can tune in coarse or fine steps across the UHF television band from 470 to 608 MHz (470-614 MHz for export versions), with a selectable output power of 25 or 50 mW. The pure digital architecture enables AES 256-CTR encryption for high-level security applications.
The top panel contains the antenna jack,...
Our Price: $1,769.00
Availability: Extended Lead Time. Email, Chat or Call Us for more details.
Add to Wish List-
Item# LEC-DM1624F
The DM1624F is a powerful digital audio processing, mixing and routing system. The primary applications are sound reinforcement and conferencing in boardrooms, courtrooms, worship centers, distance learning systems, hotels and other applications with multiple microphones and loudspeakers. The design represents a milestone in DSP technology in its basic architecture and in its processing speed and efficiency.
The basic architecture consists of 16 mic/line inputs and 24 outputs with...
