-
Item# DCSF2035PN
The Lemo DCS.F2.035.PN is a simple tool with two threaded end for installation/extraction of the F2 contact alignment device.
-
Item# FHG1B310CLAD52Z
Lemo FHG.1B.310.CLAD52Z is a 10 Position right angle plug male cable collet circular push pull connector.
Specifications: Connector Type: Plug, Male Pins
Number of Positions: 10
Shell Size - Insert: 310
Mounting Type: Free Hanging (In-Line), Right Angle
Termination: Solder Cup
Fastening Type: Push-Pull
Orientation: G
Shell Material: Brass
Shell...
-
Item# FGG0B305CLAD42Z
Lemo FGG.0B.305.CLAD42Z is a straight plug cable collet connector.
Features: Shell Style/Model FG*: Straight plug, cable collet and nut for fitting a bend relief
Keying G: 1 key (alpha=0, plug: male contacts, receptacle: female contacts)
Housing Material C: Brass (chrome plated) shell and collet nut, nickel plated brass latch sleeve and mid pieces
Cable Fixing D42: 3.1 - 4 mm (0.12 - 0.16")
Variant Z: Nut for fitting a bend relief
Our Price: $39.99
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# BFG3K100EAN
Protect your critical fiber optic surfaces with this protective cap for LEMO FUW Connectors. Includes aircraft cable lanyard to ensure it always stays with your cable.
Our Price: $43.89
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# BRA3K200EAN
Protective Cap for LEMO EDW / PEW / PBW Connectors
Specifications: Endurance (Shell): 5000 mating cycles
Temp (min): -55øC deg
Temp (max) +200øC deg
Humidity (max): [at 60 deg C /140 F]
Vibration:15 g [10 Hz - 2000 Hz]
Shock Resistance: 100 g [ 6 ms]
Salt Spray Corrosion: >144 hr
Climatical Category: 50/175/21
Shielding (min): 95 dB (10 MHz)
Shielding (min): 80 dB (1 GHz)
IP Rating: 68
-
Item# BRF3K200EAN
Protective Cap for LEMO PUW Connectors
Specifications: Endurance (Shell): 5000 mating cycles
Temp (min): -55øC deg
Temp (max): +200øC deg
Humidity (max): [at 60 deg C /140 F]
Vibration:15 g [10 Hz - 2000 Hz]
Shock Resistance: 100 g [ 6 ms]
Salt Spray Corrosion: >144 hr
Climatical Category: 50/175/21
Shielding (min): 95 dB (10 MHz)
Shielding (min): 80 dB (1 GHz)
IP Rating: 68
-
Item# DCS91F23LA
Used for maintenance cleaning. The tool is made with a sponge alcohol reservoir (supplied empty). 16 dry cotton buds are included. The threaded end allows extraction/reinstallation of the F2 contact alignment device.
Our Price: $359.44
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# EEG3B308CLL
Lemo EEG.3B.308.CLL female 8-pin B-Series push pull connector: a secure, push pull latching system with high-density panel spacing, 360 degree EMI shielding and quick mating or unmating. This LEMO push pull connector series is designed for indoor or vacuum-tight applications, making it an ideal choice for test and measurement instrumentation, medical devices, research, audio/video and applications where a highly reliable, quick-mating connector is needed. Specifications: Connector...
-
Item# EEJ2B306CLA
Lemo EEJ.2B.306.CLA B-Series push pull connector: a secure, push pull latching system with high-density panel spacing, 360 degree EMI shielding and quick mating or unmating. This LEMO push pull connector series is designed for indoor or vacuum-tight applications, making it an ideal choice for test and measurement instrumentation, medical devices, research, audio/video and applications where a highly reliable, quick-mating connector is needed. Features: Security of the Push-Pull self-latching...
-
Item# EXN4A675CTL
Lemo's range of Triaxial Connectors are designed specifically for connections between television cameras and cotnrol equipment. The Lemo 4A Series is widely used by most manufacturers of professional level video cameras and is suitable for both indoor and outdoor environments. 75 Ohm impedance with 2.5 GHz operating frequency.
Lemo 3T and Redel Models also available. Please call or email sales.
Our Price: $163.80
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# FFA1S302CLAK72Z
Lemo FFA.1S.302.CLAK72Z S-Series circular connectors are the original push pull connectors, offering the high performance and rugged design for which they are known. The S-Series circular connector is ideal for use in the audio/video field, machine industry, medical applications, research instrumentation and test & measurement environments. This circular connector can be built with unipole, coaxial, multipole, or triaxial contacts (stepped inserts for alignment are available in the multipole...
-
Item# FFA1S303CLAC52Z
Lemo FFA.1S.303.CLAC52Z split gender 3-pin collet S-Series circular connectors are the original push pull connectors, offering the high performance and rugged design for which they are known. The S-Series circular connector is ideal for use in the audio/video field, machine industry, medical applications, research instrumentation and test & measurement environments. This circular connector can be built with unipole, coaxial, multipole, or triaxial contacts (stepped inserts for alignment are...
-
Item# FFA2S306CLAC62
Lemo FFA.2S.306CLAC62 is an FFA straight plug cable collet.
Features: Shell Style/Model FFA: Straight plug, cable collet
Keying -: Hermaphroditic keying ("half moon" insert), plug has male pin 1
Housing Material C: Brass (chrome plated) shell and collet nut, nickel plated brass latch sleeve and mid pieces
Cable Fixing C62: 5.1 - 6 mm (0.2 - 0.24")
Variant -: None
Our Price: $51.60
Availability: Extended Lead Time. Email, Chat or Call Us for more details.
Add to Wish List-
Item# FFB-4A-675-CTCC1
The FFB.4A.675.CTCC13 is a Shell Style/Model Ffa- Straight plug, cable collet. Keying - Hermaphroditic keying ("half moon" insert), plug has male pin 1 Specifications . Housing Material C: Brass (chrome plated) shell and collet nut, nickel plated brass latch sleeve and mid pieces. Cable Fixing C62: 5.1 - 6 mm (0.2 - 0.24")
-
Item# FFC-00-250-CTAC2
The Lemo FFC.00.250.CTAC27 is a Circular Push Pull Connector with a straight plug with flats on latch sleeve and cable collet.
Specifications: Configuration: 00.250 : 1 Coax (50 Ohm)
Insulator: T: PTFE
Rated Current: 4 Amps
Contact Type: Coaxial 50 Ohm (Solder)
Contact Dia.: 0.7 mm (0.028in)
Bucket Dia.: 0.6 mm (0.024in)
Test voltage: 2.1 kV (rms)
R (max):...
Our Price: $10.50
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# FFSF2BA2LCE30
Standard F2 male fibre optic contact for EDW, ENW, EBW connector models. Tight jacket cable for 1.7 to 3.0 diameter cable.
The standard F2 fibre contact is the highest performing solution on the market regarding thermal stability and very low signal loss. The F2 pre-terminated fibre optic contact was designed as repair solution but may also be used for indoor fixed installations. These pre-terminated contacts enable simple and rapid on-site-terminations. The design eliminates the need to polish...
Our Price: $41.95
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# FFSF2BA2LCT10
Standard F2 male fibre optic contact for EDW, ENW, EBW connector models. Buffer coated fiber cable for 0.25 to 1.1 diameter cable.
The standard F2 fibre contact is the highest performing solution on the market regarding thermal stability and very low signal loss. The F2 pre-terminated fibre optic contact was designed as repair solution but may also be used for indoor fixed installations. These pre-terminated contacts enable simple and rapid on-site-terminations. The design eliminates the need...
Our Price: $41.95
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# FFSF2BB2LCE30
LEMO's 3K.93C SMPTE Fiber HDTV Optical Contacts.
The standard F2 fibre contact is the highest performing solution on the market regarding thermal stability and very low signal loss. The F2 pre-terminated fibre optic contact was designed as repair solution but may also be used for indoor fixed installations. These pre-terminated contacts enable simple and rapid on-site-terminations. The design eliminates the need to polish fibre optic elements as well as preparing and using special epoxies for...
Our Price: $76.69
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# FGG-0B-303CLAD35
Lemo FGG.0B.303.CLAD35 B series multi-pole connector - 3 pin straight plug.
Features: Shell Style/Model FG*: Straight plug, cable collet
Keying 1 key (alpha=0, plug: male contacts, receptacle: female contacts)
Housing Material Brass (chrome plated) shell and collet nut, nickel plated brass latch sleeve and mid pieces
Cable Fixing D35: 3 - 3.5 mm
Our Price: $34.24
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# FGG-2B306-CLAD82
Lemo FGG-2B306-CLAD82 is a 6-way Circular Connector, 2B series, straight plug with cable collet and nut for fitting a bend relief. Single key, male (plug) contacts and female (socket) contacts. Push-pull self-latching system with six solder contacts. Chrome-plated brass shell and collet nut, nickel plated brass latch sleeve and mid pieces. The modular design of the 2B series connector offers a solution for most applications.
Features: 2A Current rating
PEEK insulator
G Key standard
IP50...
Our Price: $70.00
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# FGG00304CLAD27Z
Lemo FGG.00.304.CLAD27Z is a straight plug cable collet connector.
Features: Shell Style/Model FG*: Straight plug, cable collet
Keying G: 1 key (alpha=0, plug: male contacts, receptacle: female contacts)
Housing Material C: Brass (chrome plated) shell and collet nut, nickel plated brass latch sleeve and mid pieces
Cable Fixing D27: 2.1 - 2.6 mm (0.08 - 0.1")
Variant Z: Nut for fitting a bend relief
-
Item# FGG0B304CLAD31
The FGG.0B.304.CLAD31 is a CLAD31 Circular Push Pull Connector, Straight Plug, Pin (Male), 4 Contact.
-
Item# FGG0B304CLAD42Z
Lemo FGG.0B.304.CLAD42Z is a straight plug cable collet connector.
Features: Shell Style/Model FG*: Straight plug, cable collet and nut for fitting a bend relief
Keying G: 1 key (alpha=0, plug: male contacts, receptacle: female contacts)
Housing Material C: Brass (chrome plated) shell and collet nut, nickel plated brass latch sleeve and mid pieces
Cable Fixing D42: 3.1 - 4 mm (0.12 - 0.16")
Variant Z: Nut for fitting a bend relief
Our Price: $36.90
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# FGG0B304CLAD56Z
Lemo FGG.0B.304.CLAD56Z Straight Plug Cable Collet and Nut for Fitting a Bend Relief Features: Shell Style/Model: FG*: Straight plug, cable collet and nut for fitting a bend relief
Keying: 1 key (alpha=0, plug: male contacts, receptacle: female contacts)
Housing Material: Brass (chrome plated) shell and collet nut, nickel plated brass latch sleeve and mid pieces
Cable Fixing: : 5.1 - 5.5 mm
Variant: Z : Nut for fitting a bend relief
Our Price: $34.24
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# FGG0B309CLAD56Z
Lemo FGG.0B.309.CLAD56Z is a secure, push pull latching system with high-density panel spacing, 360 degree EMI shielding and quick mating or unmating. This LEMO push pull connector series is designed for indoor or vacuum-tight applications, making it an ideal choice for test and measurement instrumentation, medical devices, research, audio/video and applications where a highly reliable, quick-mating connector is needed. Specifications: Connector Type: Straight Plug
Contact...
Our Price: $41.49
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List
