-
Item# CMB-2008867
The customer requested an easily identifiable channels at a glance so we designed it with Neutrik color coded ID plates. The box has 20 channels total featuring all Neutrik 3-Pin XLR audio channels, Neutrik 4-Pin XLR intercom channels and Neutrik RJ45 Ethernet ports.
Features: 20-Channel stage Box with Carry Handle
Color Coded ID Plates
6x Black and Gold 3-Pin XLR Female Channels
8x Black and Gold 3-Pin XLR Male Channels
1x 4-Pin Female XLR Channel
1x 4-Pin Male XLR Channel
2x RJ45 Ethernet...
Availability: More on the way, usually ships in 3-10 business days
Item Details
-
Item# CMB-M2308166LE
A customer designed creation for a projection setup, this 9" x6.5" panel is made to be rackmountable where th panel stands-off from the rack to allow easy cable pass through. It includes laser engraved callouts and HDMI, VGA and RCA feed-through connectors.
Availability: More on the way, usually ships in 3-10 business days
Item Details
-
Item# CMC-M1776215
12-Channel Custom Cable Snake featuring Mogami 2933 multichannel audio cable. Ends include Neutrik TRS Right Angle 1/4" connectors, XLR channels, RCA audio channels and stripped and tinned open leads with all channels fully labeled and color coded. Features: 12-Channel Mogami 2933 Snake
Neutrik Right Angle TRS 1/4"
Neutrik XLR Female Channels
Stereo RCA Pair
Stripped and Tinned Open Leads
Availability: More on the way, usually ships in 3-10 business days
Item Details
-
Item# CMC-M2707890
This 4-Foot Custom Camera Cable Link pairs an Ikegami EIAJ 26-Pin Female to a Sony EIAJ 14-Pin Male.
Availability: More on the way, usually ships in 3-10 business days
Item Details
-
Item# CMC-M2847442-1
This Custom made 39 Foot Fan to Breakout Box Video Snake features a Hirose 26-Pin EIAJ Camera connector broken out to a secondary box with SDI via BNC, VGA via HD15Pin, Intercom via XLR and Tally via 3.5mm. Snake is connected via Gepco high quality RGB644 cable and all connections are hand soldered.
Features: 26-PIN EIAJ Hirose Breakout
Gepco RGB644 Cable
SDI Feed
VGA Feed
Tally Feed
Intercom Feed
Availability: More on the way, usually ships in 3-10 business days
Item Details
-
Item# CMC-M2903818-5
Custom snake cable combines 5 channels under a single jacket featuring two RG6 BNC Video Channels with two XLR Audio Channels and a CAT6 Ethernet connection.
Features: Dual Video BNC Channels with RG6 Cable and Kings BNC
Dual Audio Chanels - Male to Female XLR
Single CAT6+ RJ45 Ethernet Feed
Availability: More on the way, usually ships in 3-10 business days
Item Details
-
Item# CMC-M2920900
Custom ADAT / Mixer snake cable features AMP 25-Pin D-Sub Male to 8 TT/Bantam connections. Wired for use with Tascam. Each channel is fully labeled and has Neutrik NP3TT-B connections. Utilizes high quality Canare MR202-8AT multichannel cable.
Features: 15 Foot Custom ADAT Cable with 24-Inch Fanouts
AMP 25-Pin D-Sub Breakout Cable
Neutrik NP3TT Bantam Male (8x)
Canare MR202 Multichannel Cable
Wired for Tascam
Availability: More on the way, usually ships in 3-10 business days
Item Details
-
Item# CMC-M3068276
This custom cable features an Amphenol chassis mount BNC female to a Right Angle DIN1.0/2.3 connector. The assembly is made with Belden 1855A 3G SDI coaxial cable.
Availability: More on the way, usually ships in 3-10 business days
Item Details
-
Item# CMP-M2282712LE
Frustrated because you need to get behind your rack panels with ease? Stay cool and don't come unhinged by calling our custom team! This custom built 6RU rack panel includes convenient hinged access to the rear panel and has a built in cooling fan. 47 panel mounted connectors in all including 3G-SDI BNC, HDMI, USB, XLR and Dual LC Fiber feed through connections.
Fully labeled via laser engraving. BNC channels included multiviewer I/O and program IO and XLR channels for Time Code....
Availability: More on the way, usually ships in 3-10 business days
Item Details
-
Item# CMP-M2583866LE
Custom built 13 x 13.25 black anodized panel for 6 SMPTE Hybrid Fiber cameras with full monitoring and IP networking. Panel is fully engraved with callouts. Features: 6 LEMO SMPTE Hybrid Panel Mounts (CP1 to CP6)
5-Pin XLR Tally Lines
Laser Engraved Labeling
RJ45 Feed Through for Network and RS-232/422 Robotic Controls
IP Network Section for Audio & Video
Availability: More on the way, usually ships in 3-10 business days
Item Details
-
Item# CMP-M2753161
Now that's thinking inside the box! These custom designed intercom boxes were fabricated for Xavier University where mounting an intercom wall plate in an existing space wasn't possible. We punched a NEMA box to fit a Clear-Com plate on the box-top for local user control. The box was punched and fully labeled on the sides for studio communication feeds. Go Musketeers!
Availability: More on the way, usually ships in 3-10 business days
Item Details
-
Item# CMP-M2767763
19" x13" Custom truck panel built with Neutrik opticalCON Fiber ports, 3G-SDI BNC Video channels for router and program I/O, XLR Intercom and Mixer ports, DANTE/MADI ethernet jacks and RF I/O.
Features: 3G-SDI BNC I/O Channels
opticalCON Camera Ports
Intercom A and B Channels
XLR Mixer I/O
DANTE / MADI Network Ports
RF I/O
Availability: More on the way, usually ships in 3-10 business days
Item Details
-
Item# CMP-M2848321
This 8x8 custom truck I/O panel features hinged rear panel access and stainless steel latches. We incorporated a single gang gem box with a front mounted IEC 15-Amp receptacle. The panel has 8 3G-SDI BNC feed-through connections, 2 HDMI feed-throughs and 4 3-Pin XLR audio I/O. Features: 8x8 Custom Truck I/O Panel
Hinged for Rear Panel Access
Stainless Steel Latches
Single gang gem box with a front mounted IEC 15-Amp receptacle
8x 3G-SDI BNC Feed-Fhrough
2x HDMI Feed-Through
4x 3-Pin XLR...
Availability: More on the way, usually ships in 3-10 business days
Item Details
-
Item# CMP-M2878564-1
A custom truck panel designed with two Kings Triax bulkheads, Dual DT12 37-Pin Audio patch points broken out to individual XLR I/O channels, 24-Channels of ST Fiber, dual ethernet RJ45 jacks and three 3G-SDI BNC video feeds. This 7RU panel is fully engraved for fast patch-point identification.
Features: 7RU Black Anodized Panel
Dual Kings Triax Video Bulkheads
Male and Female DT12 37-Pin Chassis Mounts
XLR Male and Female I/O for DT12 Channel Breakouts
3G-SDI Video Feeds
Press Feeds and RJ45...
Availability: More on the way, usually ships in 3-10 business days
Item Details
-
Item# CMP-M2914082
Custom 8RU panel designed to interface 6 cameras. Fully punched and labeled for camera send, monitoring, sync, timecode, telepromter, network interface and tally.
Availability: More on the way, usually ships in 3-10 business days
Item Details
-
Item# CMP-M3321369
This panel was designed for a major TV network to route feeds for its OTT streaming app. It is laser engraved to call out connections for integrated receiver/decoder uplink and downlink paths and includes redundant pathways for backup purposes.
Features: 2RU Custom Punched and Engraved Black Anodized Panel
14x Neutrik 4K/8K BNC Panel Mount Feed-Thru Connections
4x Neutrik etherCON RJ45 IP Ports
Availability: More on the way, usually ships in 3-10 business days
Item Details
-
Item# CXP-M2767477-2
Customer designed custom panel for the University of Virginia's Hoovision production team. Panel features a single Neutrik opticalCON DUO Fiber feed-through along with a complete set of XLR channels for Intercom Communication and BNC video feeds. Features: 2RU Enraved Custom Rack Panel
1x Neutrik opticalCON DUO Fiber Optic Feed-Through
8x 3G-SDI BNC Feed-Through
13x 3-Pin Male XLR Channels
7x 3-Pin Female XLR Channels
Availability: More on the way, usually ships in 3-10 business days
Item Details
-
Item# CXW-M2767477-1
A Custom Wall Plate featuring a Neutrik opticalCON DUO fiber optic chassis mount and engraved for the University of Virginia's Hoovision production team.
Features: Black Anodized Aluminum Wall Plate
Neutrik NO2-4FDW-A opticalCON DUO Fiber Optic Feed-Through
Availability: More on the way, usually ships in 3-10 business days
Item Details