-
Item# CATRACK-MX
The SoundTools CAT Rack MX is a 1RU 12 male XLR rack unit with Main and Parallel etherCON connectors capable of receiving up to 12 lines of balanced analog audio down 3 shielded CAT5 cables.
The CAT Rack consists of 12 Neutrik XLR connectors and 6 Neutrik etherCON connectors. The 12 channels are broken down into three sets of 4 channels marked A, B, and C, which are transported down a shielded CAT5 cable. Each line can carry balanced analog, AES/EBU, DMX, and Clear-Com signals hundreds...

-
Item# CATBOX-FX
The SoundTools CAT Box FX Stage Box allows four lines of balanced analog audio to be run down a shielded CAT5, CAT5e, CAT6 or CAT7 cable. Each CAT Box stage box has an etherCON input and an etherCON parallel output that allows the CAT Box to be used as a hard-wire split. You can run 4 stereo AES lines down a single shielded CAT5/5e/6 cable for a longer distance AES signal. CAT5e is superior for carrying AES signals over longer distances than conventional 4-channel audio snakes.
The...

-
Item# RSS-WALLCAT8
The SoundTools WallCAT is designed to transport audio easily and conveniently from one room to the next utilizing shielded CAT5/6/7 cable. Each WallCAT has an input and parallel RJ45. That enables audio to be sent from one room to multiple locations or from multiple locations to a single room.
Audio Over Cat5 Wall Mount
Send audio and data from one room to another using installed shielded Cat5 cable and SoundTools Wall CATs. These durable aluminum wall units fit standard 4" electrical...

-
Item# RSS-WC111-B
2 Colors and 2 Genders AvailableThe SoundTools WallCAT transports audio easily and conveniently from one room to the next by utilizing shielded CAT5, CAT5e, CAT6 or CAT7 cable. The highlight of this XLR extender is its compatibility with balanced analog, digital, AES/EBU, DMX and Clear-Com signals.
Every connection you need, including 4 Neutrik XLR connectors in front and 2 Amphenol RJ45 connections in back, come pre-installed and clearly labeled. The high-quality brushed aluminum and stainless steel mounting...
Read More
-
Item# CATRACK-FX
The SoundTools CAT Rack FX is a 1RU 12 female XLR rack unit with Main and Parallel etherCON connectors capable of receiving up to 12 lines of balanced analog audio down 3 shielded CAT5 cables.
The CAT Rack consists of 12 Neutrik XLR connectors and 6 Neutrik etherCON connectors. The 12 channels are broken down into three sets of 4 channels marked A, B, and C, which are transported down a shielded CAT5 cable. Each line can carry balanced analog, AES/EBU, DMX, and Clear-Com signals hundreds...

-
Item# RSS-CTMX
The SoundTools CTMX CAT Tails utilizes a CAT5/etherCON breakout to four XLR cables. Plug directly into your audio channels and run up to four balanced analog lines down a shielded CAT5, CAT5e, CAT6 or CAT7 cable. Simplify your stage set up with SoundTools CAT Tails and run one slim Cat5e cable instead of 4 bulky XLR or DMX cables. When used with shielded cat cable, CAT Tails are compatible with 48-volt phantom power and can run four channels of lossless audio and com with no interference...

-
Item# CATBOX-MX
The SoundTools CAT Box MX Stage Box allows four lines of balanced analog audio to be run down a shielded CAT5, CAT5e, CAT6 or CAT7 cable. Each CAT Box stage box has an etherCON input and an etherCON parallel output that allows the CAT Box to be used as a hard-wire split. You can run 4 stereo AES lines down a single shielded CAT5/5e/6 cable for a longer distance AES signal. CAT5e is superior for carrying AES signals over longer distances than conventional 4-channel audio snakes.
The...

-
Item# ST-XLR-SS
The SoundTool Sniffer and Senders are 'On the fly', highly reliable, testers with remote ends used in the field to quickly determine faulty XLR cables and for testing phantom power at various stages and locations. They can also be used to quickly test phantom power on snakes. The SoundTools SSXLR Sniffer is a single ended XLR male cable tester that utilizes phantom power or the SoundTools Sender as a test source. The SoundTools Sender is a battery powered XLR female tester that...

-
Item# RSS-CTFX
The SoundTools CTFX CAT Tails utilizes a CAT5/etherCON breakout to four XLR cables. Plug directly into your audio channels and run up to four balanced analog lines down a shielded CAT5, CAT5e, CAT6 or CAT7 cable. Simplify your stage set up with SoundTools CAT Tails and run one slim Cat5e cable instead of 4 bulky XLR or DMX cables. When used with shielded cat cable, CAT Tails are compatible with 48-volt phantom power and can run four channels of lossless audio and com with no interference...

-
Item# RSS-SSNL4
The SoundTool Sniffer and Senders are 'On the fly', highly reliable, testers with remote ends used in the field to quickly determine faulty NL4/Speakon cables at various stages and locations. They can also be used to quickly test phantom power on snakes.
Designed by Rat Sound to deal with the "real world" of pro audio, the SoundTools SSNL4 Sniffer cable tester is a amazingly simple and reliable tester with many unique features. Machined from durable aluminum tubing, the NL-4...

-
Item# RSS-100009
The Sound Tools SS-DMX DMX Sniffer/Sender instantly tests 5 pin DMX cables in your stage lighting or theatrical control setups. Faulty cables are one of the most common issues in malfunctioning DMX networks, but testing them hasn't always been easy. The SoundTools SS-DMX DMX Sniffer/Sender simplifies the cable testing process so you can test your cables where they are in your setup and know instantly if your issue is cable or fixture related. The two-piece...

-
Item# RSS-SCTFX
The SoundTools SCTFX SuperCAT Sound cable allows the SuperCAT Tails to achieve a new level of simplicity at a lower cost while enhancing reliability and reducing weight. The SuperCAT Sound Tails implement a male cable mount etherCON on one end, terminating to four XLR 3-pin connectors on the other end.
Features: One black shielded Neutrik etherCON RJ45 connector and four black Neutrik XLR connectors, laser engraved 1-4
Connects to Cat5e cables with Neutrik etherCON adapter (NE8FF)
Made...

-
Item# RSS-SCTFX-RJ45
The SoundTools SCTFX-RJ45 SuperCAT Sound cable allows the SuperCAT Tails to achieve a new level of simplicity at a lower cost while enhancing reliability and reducing weight. The SuperCAT Sound Tails implement a male cable mount RJ45 on one end, terminating to four XLR 3-pin connectors on the other end.
Features: One silver shielded RJ45 connector and four black Neutrik XLR connectors, laser engraved 1-4
Connects to Cat5e cables with Neutrik etherCON adapter (NE8FF)
Made with SuperCAT...

-
Item# RSS-SCTMX
The SoundTools SCTMX SuperCAT Sound cable allows the SuperCAT Tails to achieve a new level of simplicity at a lower cost while enhancing reliability and reducing weight. The SuperCAT Sound Tails implement a male cable mount etherCON on one end, terminating to four XLR 3-pin connectors on the other end.
Features: One black shielded Neutrik etherCON RJ45 connector and four black Neutrik XLR connectors, laser engraved 1-4
Connects to Cat5e cables with Neutrik etherCON adapter (NE8FF)
Made...

Our Price: $115.00
Availability: Extended Lead Time. Email, Chat or Call Us for more details.
Add to Wish List
-
Item# RSS-SCTMX-RJ45
The SoundTools SCTMX-RJ45 SuperCAT Sound cable allows the SuperCAT Tails to achieve a new level of simplicity at a lower cost while enhancing reliability and reducing weight. The SuperCAT Sound Tails implement a male cable mount RJ45 on one end, terminating to four XLR 3-pin connectors on the other end. Features: One silver shielded RJ45 connector and four black Neutrik XLR connectors, laser engraved 1-4
Connects to Cat5e cables with Neutrik etherCON adapter (NE8FF)
Made with SuperCAT Sound...

Our Price: $115.00
Availability: Extended Lead Time. Email, Chat or Call Us for more details.
Add to Wish List
-
Item# RSS-TOOLBAG4PACK
The SoundTools Canvas Tool Bag 4 Pack is the ideal way to carry your audio and lighting tools. Holds CAT Box, CAT Tails, Sniffer/Senders or whatever else you need while you're out making sure things sound great and look awesome. Made from canvas with nylon zipper, this pack includes one bag of each color.
Each SoundTools Canvas Tote bag is 11" wide by 7" high, and 1/4" thick. Stamped with the SoundTools logo and tagline that reads "Quality Tools for the Audio Pro". Each set includes...
