Continue Shopping View Cart
Markertek - The Future of Broadcast Supply

Call 800-522-2025
M-F 8:30am - 7pm EST

Employee-Owned-Banner

Secure LoginClose X

Returning Markertek Customers

New Markertek Customers





Why Create an Account?

Creating a Markertek account now will save you time on future orders. You'll have full access to your order history and a personalized shopping experience.

 

View As:

Sort By:

Display:

Mic Splitters:

Page:

►►
    ◄◄
     
     
     
    • ETS PA830 AES/EBU 110 Ohm Digital Audio Splitter XLRF to 2 XLRM

      ETS PA830 AES/EBU 110 Ohm Digital Audio Splitter XLRF to 2 XLRM

      The ETS PA830 Series are the Balanced Line™ Digital Audio Splitters and Digital Audio Splitter Panels. These products are expressly designed for the digital audio market. Used only for balanced 110 Ohm signals, these units accommodate signal levels to 10V. Since proper impedance is maintained, the splitters do not have to be symmetrically applied. Due to careful specification and minimal signal modification, these units may be cascaded reducing transmitted signal power by 3 dB at each stage. New...

      Free Ship Banner

      3 Versions Available

      Item #: ETS-PA830

      Availability: In Stock

      Our Price: $92.00

      Add to Wishlist
    • Radial JS2 Mic Splitter

      Radial JS2 Mic Splitter

      The Radial JS2 and JS3 are Jensen Transformer equipped mic splitters that allow a balanced source to drive multiple destinations via standard XLR connectors. These passive devices feature a premium nickel laminated core transformer for exceptionally low harmonic distortion without the usual phase shift caused by lesser steel core transformers. The undisputed benefit of 100% transformer isolation provides better than -90dB common mode noise rejection (CMR), thus eliminating troublesome hum & buzz...

      Free Ship Banner

      2 Outputs Available

      Item #: RAD-JS2

      Availability: Usually ships in 3-10 business days

      Our Price: $219.99

      Add to Wishlist
    • Whirlwind SBNL18442 Splitter - Speakon Stagebox 1 NL8 4 NL4 1(plus/minus)

      Whirlwind SBNL18442 Splitter - Speakon Stagebox 1 NL8 4 NL4 1(plus/minus)

      The Whirlwind SBNL18442 is part of the SBNL Series and is a (1) NL8, (4) NL4 wired 2-pole NL Speakon Splitter Box.The SBNL series of boxes provide a convenient way to split or breakout NL Speakons for multiple speaker cabinet hookup. Features: Specifications:

      Free Ship Banner

      Read More

      Item #: WW-SBNL18442

      Availability: Usually ships in 3-10 business days

      Our Price: $127.00

      Add to Wishlist
    • Whirlwind SBNL14442 Splitter - Speakon Stagebox 1 NL4/4 NL4 Wired 2-Pole in Pairs

      Whirlwind SBNL14442 Splitter - Speakon Stagebox 1 NL4/4 NL4 Wired 2-Pole in Pairs

      This Whirlwind SBNL14442 SBNL series of boxes provide for a convenient way to split or breakout NL Speakons® for multiple speaker cabinet hookups. Features: Specifications:

      Free Ship Banner

      Read More

      Item #: WW-SBNL14442

      Availability: Usually ships in 3-10 business days

      Our Price: $116.00

      Add to Wishlist
    • Switchcraft RMAS1 Single Channel Mic Splitter Custom Transformer

      Switchcraft RMAS1 Single Channel Mic Splitter Custom Transformer

      The Switchcraft RMAS1 is a passive 3-way transformer isolated microphone splitter ideal for sending a single balanced audio input to 3 unique destinations. The RMAS1 is available with either Jensen or premium custom transformers to provide 100% isolation from noise and a truly uncolored audio output. Features: Single XLR input split to 3 balanced XLR outputs (2 isolated, 1 direct) Mu-metal shielded transformers eliminate ground loops, improve CMRR and block phantom power from interconnected equipment...

      Free Ship Banner

      Read More

      Item #: SWC-RMAS1

      Availability: Usually ships in 3-10 business days

      Our Price: $98.44

      Add to Wishlist
    • Art S8 Eight Channel Balanced 2-Way Mic Splitter

      Art S8 Eight Channel Balanced 2-Way Mic Splitter

      The ART S8 can be used to split eight balanced low impedance microphone signals into sixteen balanced low impedance microphone signals (eight pairs). Each channel of the S8 provides one direct output and one transformer isolated output from a single microphone. Applications include sending the direct outputs to the main or Front-of-House mixer, and the second isolated outputs being sent to a monitor or recording mixer. The direct outputs pass phantom power from the main mixer to the microphones...

      Free Ship Banner

      Read More

      Item #: ART-S8

      Availability: Direct Ship From Manufacturer

      Our Price: $279.99

      Add to Wishlist
    • Radial Engineering LX3 Passive Line Splitter

      Radial Engineering LX3 Passive Line Splitter

      The Radial LX-3 is a high-performance balanced line-level splitter designed to send one audio signal to as many as three destinations at once. Completely passive with no need for power, you simply plug in and the LX-3 goes to work delivering your audio wherever it needs to go. The heart of the LX-3 is a premium Jensen JT-123-FLPCH transformer. This has the industry's best combination of frequency response, signal level handling, and low distortion, providing the highest possible...

      Free Ship Banner

      Read More

      Item #: RAD-LX3

      Availability: Usually ships in 3-10 business days

      Our Price: $259.99

      Add to Wishlist
    • AES/EBU 75 Ohm Digital Audio Splitter with BNC Connectors

      AES/EBU 75 Ohm Digital Audio Splitter with BNC Connectors

      Features: 75 Ohm Impedance 3dB Per Port Signal Drop 100KHz to 25MHz BNC Connectors

      Free Ship Banner

      Read More

      Item #: ETS-PA820

      Availability: Usually ships in 3-10 business days

      Our Price: $62.65

      Add to Wishlist
    • Whirlwind SPLIT 6 1x6 Line Level Parallel Splitter

      Whirlwind SPLIT 6 1x6 Line Level Parallel Splitter

      Use this handy box when you need to split a line level signal up to 6 times*. Features 1 female XLR input wired to 6 male XLR outputs. Perfect when adding extra amplifiers to a system, connecting multiple powered speakers, splitting intercom lines, etc. *Line level outputs can usually be split 6 times without noticeable loss of signal quality. The actual number of splits that can be accomplished depends on the level of the source signal and the impedances of...

      Free Ship Banner

      Read More

      Item #: SPLIT-6

      Availability: In Stock

      Our Price: $83.00

      Add to Wishlist
    • Whirlwind SP1X3 IMP Mic Level Splitter 1x3

      Whirlwind SP1X3 IMP Mic Level Splitter 1x3

      The Whirlwind SP1X3 mic splitter provides one direct and two transformer isolated output from a mic level input. Each transformer isolated output on these devices features a ground lift switch. On the IMP Splitters are male XLR jacks, one female XLR jack and one switch as outlined below. INPUT Female XLR input jack for connection of a low impedance balanced signal such as that of a microphone. DIRECT OUTPUT and ISOLATED OUTPUT Male XLR jacks. The DIRECT...

      Free Ship Banner

      2 Types Available

      Item #: SP1X3

      Availability: In Stock

      Our Price: $119.00

      Add to Wishlist
    • Radial Engineering SAT2 Passive Line Level Stereo Attenuator

      Radial Engineering SAT2 Passive Line Level Stereo Attenuator

      The SAT-2 is a stereo audio attenuator and monitor controller, providing an adjustable level control wherever you need it. To use the SAT-2 as a monitor controller, connect it between your playback device and a pair of powered speakers for a number of useful features. In addition to an overall level control, there is also a dim switch with an adjustable level, plus mono sum and mute switches. Inputs are accessed via ¼" or XLR connectors, for balanced or unbalanced operation,...

      Free Ship Banner

      Read More

      Item #: RAD-SAT2

      Availability: Usually ships in 3-10 business days

      Our Price: $129.99

      Add to Wishlist
    • Radial Engineering Mix 2:1 2-Channel Passive Stereo to Mono Mixer

      Radial Engineering Mix 2:1 2-Channel Passive Stereo to Mono Mixer

      The MIX2:1 is a simple yet highly useful mixer that passively sums two audio channels down to one. This enables you to easily sum the stereo outputs of a console, recording interface, or portable playback device down to mono. You can also combine two separate signals, matching the input levels between them. Inputs can be accessed via XLR or ¼" connectors, allowing you to use balanced or unbalanced sources. Each input features an on/off switch, variable level control, and...

      Free Ship Banner

      Read More

      Item #: RAD-MIX-21

      Availability: In Stock

      Our Price: $129.99

      Add to Wishlist
    • Pro Co Sound MS3 3-Way Microphone Splitter Box

      Pro Co Sound MS3 3-Way Microphone Splitter Box

      For splitting signal from a low-Z microphone between 3 mixers. Female XLR type input; direct and 2 isolated male XLR type outputs; isolated outputs have ground lift switches. Uses MBT-2 transformer (150 Ohms 1:1:1).

      Free Ship Banner

      Read More

      Item #: MS3

      Availability: Usually ships in 3-10 business days

      Our Price: $112.08

      Add to Wishlist
    • RDL STD-600 Passive Audio Divider/Combiner - 600 Ohm

      RDL STD-600 Passive Audio Divider/Combiner - 600 Ohm

      Each STD module is a resistive branching network with RF filtering on each of the four channels. Any channel, A through D, may be either an input or an output. This permits combining stereo signals into mono inputs, splitting mono signals to multiple inputs, and even combining microphones with output shorting switches into a single amplifier input. The STD modules are available in 150 Ohm, 600 Ohm and 10 k Ohm models. All inputs and outputs are balanced. Features: 600 Ohm Operation Combine Audio...

      Free Ship Banner

      Read More

      Item #: STD-600

      Availability: In Stock

      Our Price: $56.67

      Add to Wishlist
    • Telex TW-7W 1x7 Intercom Breakout Box

      Telex TW-7W 1x7 Intercom Breakout Box

      One 3-Pin XLR female into seven 3-Pin male XLR out (half-rack wide).

      Free Ship Banner

      Read More

      Item #: TW-7W

      Availability: Usually ships in 3-10 business days

      Our Price: $143.00

      Add to Wishlist
    • Mic Combiner 2 XLR In - 1 XLR Out

      Mic Combiner 2 XLR In - 1 XLR Out

      Two XLR inputs and one XLR output. Combines mic signals. Also permits phantom power for both microphones if available from the console. Add an additional microphone to a (or other powered monitor) when all inputs are in use. Permits phantom power to go to both microphones if available from the console. The JIB/C is designed for those situations when you need one extra channel to plug a microphone into your mixer. Simply plug a microphone (wired or wireless) into each input and connect the...

      Free Ship Banner

      Read More

      Item #: GXY-JIBC

      Availability: Usually ships in 3-10 business days

      Our Price: $32.39

      Add to Wishlist
    • Whirlwind SP1X2 1x2 Mic Splitter

      Whirlwind SP1X2 1x2 Mic Splitter

      The Whirlwind SP1X2 mic splitter provides one direct and one transformer isolated output from a mic level input. Each transformer isolated output on these devices features a ground lift switch. On the IMP Splitters are male XLR jacks, one female XLR jack and one switch as outlined below. INPUT Female XLR input jack for connection of a low impedance balanced signal such as that of a microphone. DIRECT OUTPUT and ISOLATED OUTPUT Male XLR jacks. The DIRECT...

      Free Ship Banner

      Read More

      Item #: IMP1X2

      Availability: Usually ships in 3-10 business days

      Our Price: $110.00

      Add to Wishlist
    • ART CoolSwitch - A/B-Y Switch

      ART CoolSwitch - A/B-Y Switch

      A-Y switching works two ways. It lets you switch a common source signal (guitar, bass or keyboard) between two amplifiers or amp channels. Or conversely, it lets you switch two source signals (ie, two different guitars) into the same amplifier. A good quality A-Y switcher will also provide LEDs or other indicators to show whether A, B or Y routing is in effect. The Y routing combines both the A and B outputs in parallel so that two amplifiers can be driven at once. The CoolSWITCH provides full...

      Free Ship Banner

      Read More

      Item #: ART-COOLSWITCH

      Availability: Usually ships in 3-10 business days

      Our Price: $59.99

      Add to Wishlist
    • ART Pro Split High Performance 2 way Microphone Splitter

      ART Pro Split High Performance 2 way Microphone Splitter

      The ProSplit provides one direct output and one transformer isolated output from a single microphone. Applications include sending the direct output to the main or Front-of-House mixer, with the second isolated output being sent to a monitor or recording mixer. The direct output passes phantom power from the main mixer to the microphone for use with condenser microphones. The ProSplit includes a ground-lift switch on the isolated output to reduce noise due to ground loops between connected equipment....

      Free Ship Banner

      Read More

      Item #: ART-PROSPLIT

      Availability: In Stock

      Our Price: $65.99

      Add to Wishlist
    • ART S8-3WAY Eight Channel Three-Way Mic Splitter

      ART S8-3WAY Eight Channel Three-Way Mic Splitter

      The S8-3WAY eight channel three way microphone splitter is ideal for live sound, recording and broadcast applications where microphone and XLR balanced line level input signals have to go to multiple mix locations. Each channel provides one XLR input, one XLR direct output with two additional transformer isolated XLR outputs for a total of 3 balanced outputs from each single microphone input signal. Typical uses would include sending 8 direct signals through the S8-3WAY to a main Front-of-house...

      Free Ship Banner

      Read More

      Item #: ART-S8-3WAY

      Availability: Direct Ship From Manufacturer

      Our Price: $329.99

      Add to Wishlist
    • ART SPLITCOMPRO 2-Way Mic Splitter/Combiner

      ART SPLITCOMPRO 2-Way Mic Splitter/Combiner

      Use the SPLITCom Pro to Split or Combine balanced low impedance microphone signals. As a Splitter: The SPLITCom Pro provides one direct-coupled output and one isolated output from a single microphone. Applications include sending the direct output to the main or FOH mixer, and the second isolated output to a monitor or recording mixer. The MAIN MIC OUTPUT passes phantom power from the main mixer to the MAIN MIC INPUT for use with condenser microphones. Phantom power is blocked...

      Free Ship Banner

      Read More

      Item #: ART-SPLITCOMPRO

      Availability: In Stock

      Our Price: $45.99

      Add to Wishlist
    • ARX BSX 16 - 1 or 2 In -  16 out Transformer Isolated Active Broadcast Splitter Pressbox

      ARX BSX 16 - 1 or 2 In - 16 out Transformer Isolated Active Broadcast Splitter Pressbox

      The ARX BSX16 Active Microphone/Line Splitter/Pressbox, has been developed to deliver the performance required by the increasingly sophisticated level of today's standards of E.N.G and broadcast audio production. 16 Output splits The ARX BSX16 is a single channel 16 way active pressbox/broadcast splitter with transformer balanced and isolated Output Splits. Although a single channel unit, there are Dual inputs with individual Gain and Level...

      Free Ship Banner

      Read More

      Item #: ARX-BSX-16

      Availability: Usually ships in 3-10 business days

      Our Price: $2,195.60

      Add to Wishlist
    • ARX IS-1 Audibox Iso Splitter Transformer Isolated 1 In 2 Out Splitter

      ARX IS-1 Audibox Iso Splitter Transformer Isolated 1 In 2 Out Splitter

      Single channel transformer isolated 1 input to 2 outputs splitter for dividing one input signal two ways in applications where complete Galvanic isolation is required. Mounted in a heavy duty all steel chassis, and available in Single Channel format. Needs no power. Features: Specifications:

      Free Ship Banner

      Read More

      Item #: ARX-IS-1

      Availability: Usually ships in 3-10 business days

      Our Price: $171.60

      Add to Wishlist
    • ARX IS-2 Audibox Iso Splitter Duo Transformer Isolated 2 In 4 Out Splitter

      ARX IS-2 Audibox Iso Splitter Duo Transformer Isolated 2 In 4 Out Splitter

      Dual Channel transformer isolated 1 input to 2 outputs splitter for dividing one input signal two ways in applications where complete Galvanic isolation is required. Mounted in a heavy duty all steel chassis, and available in Double Header dual channel (IS-2) format. The unique Audibox Double Header format puts one channel on the front of the unit, and a second channel on the rear, putting two channels in the space of one! An ultra useful and convenient option. Needs no power. Features: Specifications:...

      Free Ship Banner

      Read More

      Item #: ARX-IS-2

      Availability: Usually ships in 3-10 business days

      Our Price: $242.00

      Add to Wishlist
    • ARX Maxisplit 2 In / 4 Out / 1 In 8 Out XLR Bal Line Splitter

      ARX Maxisplit 2 In / 4 Out / 1 In 8 Out XLR Bal Line Splitter

      In the modern multi-zone Installation audio environment it has become a fact of life that one signal now has to go to more than one place, and usually at differing levels. And, to ensure a low noise floor and good frequency response, the split signal needs to be buffered and balanced as well. The Solution To fulfill this seemingly simple but important signal splitting task, ARX have designed the MaxiSPLIT: - two independent channels of 1 into 4 Splitters, switchable to a single...

      Free Ship Banner

      Read More

      Item #: ARX-MAXISPLIT

      Availability: Usually ships in 3-10 business days

      Our Price: $699.60

      Add to Wishlist
     

    Page:

    ►►
      ◄◄
       
       
       
       

      Mic Splitters

      Mic Splitters can be used in several applications, including splitting mic signals to multiple audio mixers or comparing microphone preamps for recording. Choose from transformer, isolated, analog, AES/EBU, rackmount and standalone configurations for problem-solving in the studio or in the field. Whatever your requirements, Markertek stocks professional Mic Splitters from leading manufacturers like Radial, Jensen, ART, Klark Teknik and Arx America. Contact a Markertek representative today and find out why our mic splitters out-perform the competition.

      Please fill out the information below
      Email Address*