Atlona AT-DVI60SRS Passive DVI Extenders Over single Cat5/6/7 (Transmitter & Receiver) - B-Stock3 (Used/Missing Parts)

ITEM #: ATNO-DVI60SRSBS3 MFG #: ATNO-DVI60SRS-BS3

Primary Image
  • Product Image Thumbnail 1 of 5
  • Product Image Thumbnail 2 of 5
  • Product Image Thumbnail 3 of 5
  • Product Image Thumbnail 4 of 5
  • Product Image Thumbnail 5 of 5

This item is no longer available.
Ask a Markertek Expert if you need assistance finding an appropriate substitute.

(800) 522-2025Email

Items similar to the ATNO-DVI60SRSBS3

ATNO-DVI60SRS-BS3 - Overview

The AT-DVI60SRS is a DVI Passive Extender kit that allows to extend high resolution DVI digital signals great distances. The DVI60SRS can transmit resolution such as 1920x1200 up to 160ft away or 1024x768 up to 180ft. With AT-DVI60SRS, users can send high quality digital video from DVI enabled PC/Laptop through single cost effective Cat5, Cat6 or Cat7 cable to the remote monitor or projector, instead of using short and expensive DVI cables.

The AT-DVI60SRS includes one transmitter and one receiver units. The transmitting unit is connected to your PC DVI output and the receiving unit is connected to the monitor or projector. The transmission distance between the transmitting and receiving units can be up to 50m (160ft) at resolutions up to 1920x1200 or 55m (180ft) at resolutions up to 1024x768. With compact size and requiring no power, AT-DVI60SRS is the most cost effective choice for bringing your impressive digital video to the remote display.

Please note: This unit is used but in working condition. This is missing the Micro usb to usb cable and manual.

  • Features:

    • DVI 1.1 compliant
    • Extend the transmission length 50m (160ft) at resolutions up to 1920x1200 or 55m (180ft) at resolutions up to 1024x768
    • Easy to install
    • No power required (passive)
    • Compact size
    • Direct plug-in
    • Capable of using CAT5/6/7 (568B Termination for optimal results)
    • Network Traffic LEDS (denotes active network traffic)
    • Please note: This unit is used but in working condition. This is missing the Micro usb to usb cable and manual.
     
  • Specifications:

    • Role of usage: Transmitter [TX] Receiver [RX]
    • DVI compliance: DVI 1.1
    • HDCP compliance: No
    • Video bandwidth Single-link: 165MHz [4.95Gbps]
    • Video support Up to WUXGA: [1920x1200@60Hz]
    • DVI over CAT5e transmission: 1920x1200@60Hz - 50m [160ft]
    • 1024x768@60Hz - 55m [180ft]
    • Audio support: No audio for DVI signal
    • Equalization: None
    • Input TMDS signal: 1.2 Volts [peak-to-peak]
    • Input DDC signal 5 Volts: [peak-to-peak, TTL] from DVI output
    • Input: 1 x DVI 1x RJ-45
    • Output: 1x RJ-45 1 x DVI
    • DVI connector: DVI-I [29-pin male digital only]
    • RJ-45 connector: WE/SS 8P8C with 2 LED indicators
     
  • Item Includes:

    • 1 x Transmitter Module
    • 1 x Receiver Module
    • 1 x Instructions Manual
     
  • Warranty:

    • 10 Years
     
  • GTIN:

    0846352001483
     

ATNO-DVI60SRS-BS3 - Required Accessories

    California Residents:
    WARNING:
    Cancer and Reproductive Harm - www.P65Warnings.ca.gov