Core SWX Mv6 Maverick Mobile Power Station - 605Wh NiMH Camera Battery System 14v/28v 40Ah Max/2 ptap/1 USB/IEC Charger

MV6 - Overview

• Features:

  • Modular Build Core designed the Mav6 understanding the need for predictive service. The modular build allows for quick service and if necessary, replacement of the charger module and battery cells. Less downtime and labor time, equates to more uptime, usability and ROI.
  • A Friendly Form Factor
  • Understanding many already have shipping cases from their older block battery packs, the MV6 was designed to fit in legacy shipping cases. With the new MV6, you can use the rear compartment, previously used for old charging stations, for additional cabling and accessories. The Nickle Metal Hydride cell composition allows for easy shipment and air travel. The form factor also works with the existing dolly install base making the Maverick and "on-dolly" power station.
  • Backlit Runtime LCD with Diagnostic Reporting The Mav6 features a runtime LCD similar to that of an on-board packs. The LCD provides 3 phase status reporting. Reports 100w dummy load runtime when not in discharge/charge (dummy load can be adjusted to suit need through FW updates via USB. Calculates remaining runtime when in use based on actual load. Calculates remaining charge time when charging.
  • Internal Charging The MV6 has a standard IEC AC input for charging from AC Mains. Plug the unit in to 110-240V AC and it will charge back up in 5 hours. An LED array in the handle illuminates when charging to display charge status from afar. The LED array can also display capacity status when in use. A recessed switch in the handle allows for control of the LED brightness as well as disabling the LED array.
  • Water Resistant The Maverick was designed to handle the rigors of productions, and we know that sometimes means inclement weather and puddles. It's all aluminum modular design provides a robust form while providing up to 7.5" of water resistance.
   

• Specifications:

  • Cell Chemistry: Nickel Metal Hydride, Travel safe
  • Capacity: 605Wh(14.4v, 42.0Ah, max rating 639wh)
  • Size: 9.56” x 13.7” x 5.3”
  • Weight: 28.3lbs.
  • Voltage Output: 2x XLR4p @ 14v(12-17vdc), 2x XLR3p @28v(regulated)
  • Max Load: 40A(20A @ 14v, 20A @ 28v)
  • Built-in Protections: Temperature(internal), Voltage(internal), Current (re-settable exterior and internal)
  • Capacity Monitoring: Backlit LCD and LED Handle
  • Aux Output: 2x Ptap(10A, 14.4v unregulated)
  • USB Output: 1x USB-A(5v, 3A)
  • Charge Time: 5hrs with built-in charger
  • AC Mains Input: 100-240VAC 50/60Hz
  • Build: Cast and Sheet Aluminum
   

• GTIN:

  0184323005864