The Doug Fleenor Design DMX12ANL-DIN is a 12 channel DMX512 to analog 0V - 10V interface. It uses pluggable terminal blocks for the DMX512 in and thru connections, analog outputs, and DC power input. The device mounts on standard 35mm "top hat" DIN rail. It is powered by 12V to 24VDC. The DMX12ANL-DIN can be pre-mounted in a NEMA1 electrical enclosure (model DMX12ANL-DINJBOX). If a power supply is needed in the enclosure, use model DMX12ANLDIN-JBOX-PS. Each analog output is capable of sourcing or sinking up to 15mA. No user adjustments or modifications are needed to select sourcing or sinking modes.
Each output channel has a dedicated common terminal to ease field wiring. The DMX512 input is optically isolated from the analog outputs. The analog outputs are not isolated from each other. 0V - 12V output is available on special order. Output isolation diodes can be installed for theatrical dimming applications (ANSI E1.3 current sourcing). Indicators are provided for POWER, SIGNAL (DMX512), and MIMIC 1. The latter mimics the level of the first analog output. An ERROR LED illuminates if an outputs level cannot be maintained at the proper voltage. These are useful diagnostic indicators to verify addressing and operation.