Hall Technologies UHBX-S-WP HDMI on Cat6 (HDBaseT) - Wall Plate Transmitter


This item is no longer available.
Ask a Markertek Expert if you need assistance finding an appropriate substitute.


Items similar to the HRT-UHBX-S-WP

UHBX-S-WP - Overview

The UHBX-S-WP is an HDMI on Cat6 (HDBaseT) single gang wall plate Transmitter. The UHBX-S-WP sender fits in a single gang Decora® style wall plate and is capable of sending a video signal to a compatible receiver (Hall Research model UHBX-R-PSE) to a maximum of 150 meters (500 ft) using a single Cat6 cable (Receiver type determines the max distance that can be 70m, 100m, or 150m).

A second single-gang module (Hall Research model UHCOM-WP) can be added to the wall plate to provide RS-232 and IR extension in both directions. The RS-232 can operate at any baud rate including 115,200 at all times and the IR extension is fully compatible with all standards (SONY, NEC, RC5, SHARP, RCA, etc).

The wall plate is powered though the Cat6 cable eliminating the need for a separate power supply connection. The wall plate conforms to HDBaseT™ power standard (PoH or IEEE802.3af), making it compatible with any certified HDBaseT™ power sourcing equipment. The wall plate sender may be connected to projectors or TVs that have direct HDBaseT™ inputs. In this case no external receiver would be needed. A PoH inserter will be required (Hall Research model 511-POH-17W).

UHBX-S-WP - Required Accessories

    UHBX-S-WP - Recommended Accessories

    California Residents:
    Cancer and Reproductive Harm - www.P65Warnings.ca.gov