Introducing the ProX XSM-AVATEM2ME, a purpose built flight case that protects and transports the Blackmagic ATEM 2 M/E Advanced Panel 20, one of the most critical control surfaces in any live production rig. When that panel goes down, the broadcast goes down. The XSM-AVATEM2ME wraps it in laminated birch plywood, aluminum reinforcement at every edge, and an interior that works as your control station the moment the lid comes off. Open it, slide out the keyboard drawer, switch on the LED lighting, and you are running the show. Made by Santosom in Portugal as part of their Professional Line, this case is built for broadcast engineers, live streaming crews, house of worship video teams, and touring AV techs who need their switcher panel protected in transit and ready to work in minutes.
Purpose Built for the Blackmagic ATEM 2 M/E Advanced Panel 20
This is not a general utility case with foam stuffed into it. The interior is dimensioned around the panel, with a protective lining that absorbs shock and holds the unit in a secure fit so it will not shift, rattle, or rub during transport. This product can accommodate up to a 32" screen or monitor.
10mm Laminated Birch Plywood Panels
The shell is built from 10mm birch plywood with a laminated surface. Birch ply is the standard in professional case building for a reason. It takes an impact and holds its shape, and the laminate face resists scuffing and moisture on loading docks and outdoor sets.
32mmx32mm Aluminum L-Angle Reinforcement
Every edge of the case is wrapped in 32mmx32mm (roughly 1.26") aluminum L angle profile. Edges and corners take the worst of the abuse in transit, so this is where the strength goes. It adds rigidity across the whole box without adding the weight of a heavier gauge shell.
10mm Aluminum Hybrid Lid
The lid uses a 10mm aluminum hybrid location system that seats it into the base for a tight, positive closure. That means a clean seal every time the case is shut, not a lid that drifts out of alignment after a few dozen loads.
Butterfly Latches
8 butterfly latches spread the clamping force evenly around the perimeter. More latches means less stress on any single point and a lid that stays shut through rough handling.
Ball Corners and Corner Braces
8 ball corners and 8 reinforced corner braces take the hits so the plywood does not have to. They also allow safe stacking in the truck and protect the case during forklift and dolly work.
Recessed Sprung Handles
8 recessed spring loaded handles give your crew multiple grip points from any side, which matters on a case this size. Recessed means nothing protrudes to catch on doorways, other cases, or truck walls.
Tour Label Dish
A built in tour label dish measuring 7.3" x 5.3" (approximately 185mm x 135mm) mounts your routing and inventory labels flat and protected. When the loading dock is stacked twenty cases deep, your crew finds this one fast.
Dimmable LED Interior Lighting
Integrated dimmable LED lighting illuminates the panel surface and the drawer space. Control positions run dark. This puts light exactly where the operator needs it and dials it down so it never spills into the room or washes out a monitor.
Sliding Keyboard and Mouse Drawer
An integrated drawer holds a keyboard and pulls out for use, with a separate sliding mouse support tray alongside it. The case becomes a complete working control station without a separate desk or table.
Rear Cable Compartment
A dedicated rear compartment, known in the trade as a dog house, houses your connected cables and lets them exit cleanly while the case stays closed and protected. No pinched cable jackets, no strain on the panel connectors, and a faster strike at the end of the night.
TAA Compliant
The XSM-AVATEM2ME is TAA compliant, which makes it eligible for government, military, education, and other institutional purchasing programs that require it.