Shure MXA902W-S-TA Ceiling Array Microphone and Loudspeaker System - White - TAA Compliant

ITEM #: SH-MXA902W-S-TA MFG #: MXA902W-S-TA

Primary Image
  • Product Image Thumbnail 1 of 5
  • Product Image Thumbnail 2 of 5
  • Product Image Thumbnail 3 of 5
  • Product Image Thumbnail 4 of 5
  • Product Image Thumbnail 5 of 5
Free Shipping with $49 Minimum Order

We are an authorized dealer for this series; however, the manufacturer does not permit online sales. Please contact a sales engineer at 1-800-522-2025 to complete your purchase.

Availability: Usually Ships in 5-14 Days.
Please Email, Chat or Call (800) 522-2025 for Detailed Delivery Info
iAvailability Description Popup


MXA902W-S-TA - Overview

The Shure MXA902W-S-TA Ceiling Array Microphone + Loudspeaker delivers premium audio capture and reproduction for all meeting spaces with virtually no setup required. It combines an advanced array microphone with an integrated loudspeaker for natural sounding speech reproduction. It features Single-Zone Automatic Coverage™ technology to capture audio from a 20ft x 20ft (6m x 6m) area and onboard IntelliMixr DSP for echo- and noise-free audio. Paintable white finish; versatile mounting options.

  • Features:

    • Array microphone and loudspeaker in one unit for premium sound with minimal installation time
    • Single-Zone Automatic Coverage technology to capture audio from a 20ft x 20ft (6m x 6m) area out of the box
    • Integrated 2.5" wide-dispersion loudspeaker for clear, intelligible speech reproduction
    • Onboard IntelliMix DSP with acoustic echo cancellation, noise reduction, automatic mixing, AGC, and EQ for echo- and noise-free audio
    • Square form factor available in 24" or 60cm sizes with paintable white finish
    • Versatile options for ceiling, pole, or wire rope suspension mounting
    • Shure Designer System Configuration software for easy setup and configuration
    • PoE+ powered
    • LED status bar with configurable colors and brightness
    • Dante & AES67 audio networking protocols
     
  • Specifications:

      General
    • Coverage Area Size: 20ft x 20ft (6m x 6m)
    • Coverage Type: Single-zone automatic
    • Power Requirements: Power over Ethernet Plus (PoE+), Class 4
    • Power Consumption: 24W maximum
    • Control Software: Designer
    • Cable Requirements: Cat5e or higher (shielded cable recommended)
    • Connector Type: RJ45
    • Plenum Rating: UL2043 (Suitable for Air Handling Spaces)
    • Dust Protection: IEC 60529 IP5X Dust Protected
    • Operating Temperature Range: 20°F - 104°F (-6.7°C - 40°C)
    • Storage Temperature Range: -20°F - 165°F (-29°C - 74°C)

      Loudspeaker
    • AES67 or Dante Digital Input
    • Channel Count: 2 input channels
    • Frequency Range (-10dB): 120Hz - 20kHz
    • Maximum Output Level: At 1m
    • Pink Noise: 86dB SPL
    • 1kHz Sine Tone: 88dB SPL
    • Coverage Angle:
      - Average of 1 octave band centered on 4kHz
      - 80°
    • Digital Signal Processing: Delay, compressor, signal generator, equalizer (4-band parametric
    • Latency (Not including Dante latency): 6.3ms
     
  • Item Includes:

    • 1x MXA902W-S array microphone with loudspeaker
    • 1x Hardware kit includes:
       - 8x Cable ties
       - 3x Strain relief tabs
       - 1x Rubber pad set
     
  • Warranty:

    • 1 Year Limited Warranty
     

MXA902W-S-TA - Required Accessories

    California Residents:
    WARNING:
    Cancer and Reproductive Harm - www.P65Warnings.ca.gov