Tripp Lite SU16KRTG 16000VA UPS Smart Online Hot Swap 12U RM 16kVA 200V-240V

SU16KRTG - Overview

• Features:

  • 16kVA / 16,000VA / 14,400W on-line double-conversion UPS, 0.9 power factor
  • 200/208/220/230/240V 50/60Hz output
  • Hot-swap power & battery modules, N+1 fault tolerance at loads up to 8kVA
  • USB, RS232, EPO ports, slot for network management card options
  • Front panel LEDs with detailed LCD monitoring and control screen
  • Expandable runtime with optional external battery packs
  • Hardwire input (3 wire), C19 outlets
   

• Specifications:

  • Output
  • Output Volt Amp Capacity (VA): 16000
  • Output kVA Capacity (kVA): 16
  • Output Watt Capacity (Watts): 14400
  • Output kW Capacity (kW): 14.4
  • Power Factor: 0,9
  • Crest Factor: 3:1
  • Nominal Output Voltage(s) Supported: 200V; 208V; 220V; 230V; 240V
  • Nominal Voltage Details: Voltage selection via front panel LCD interface
  • Frequency Compatibility: 50 / 60 Hz; Supports 50 to 60 Hz and 60 to 50 Hz conversion
  • Output Voltage Regulation (Line Mode): +/- 2%
  • Output Voltage Regulation (Battery Mode): +/- 2%
  • Output Receptacles: (8) C19
  • Output Circuit Breakers: 8 20A breakers protect one C19 outlet each
  • Output AC Waveform (AC Mode): Pure Sine wave
  • Output AC Waveform (Battery Mode): Pure Sine wave
    
    Input
  • Rated input current (Maximum Load): 92A (200V), 88.4A (208V), 83.6A (220V), 80A (230V), 76.6A (240V)
  • Nominal Input Voltage(s) Supported: 200V AC; 208V AC; 220V AC; 230V AC; 240V AC
  • UPS Input Connection Type: Hardwire
  • UPS Input Connection Description: Hardwire input supports North American 208/240V input (L1, L2, G) and International 230/220/240V input (L, N, PE)
  • Recommended Electrical Service: 100A @ 200V-240V (L, N, PE), or 100A @ 200V, 208V, or 240V (L1, L2, G)
  • Voltage Compatibility (VAC): 200; 208; 230; 240; 220
  • Input Phase: Single-Phase
    
    Battery
  • Full Load Runtime (min.): 5.5 minutes (14,400 watts)
  • Half Load Runtime (min.): 13.5 minutes (7200 watts)
  • Expandable Battery Runtime: Runtime is expandable with external battery packs
  • DC System Voltage (VDC): 240
  • Battery Recharge Rate (Included Batteries): Less than 6 hours from 10% to 90% (typical, full load discharge)
  • Battery Replacement Description: Hot-swappable, user replaceable external battery packs
  • Expandable Runtime: Yes
    
    Voltage Regulation
  • Voltage Regulation Description: 2% output voltage regulation in standard online, double-conversion mode
  • Overvoltage Correction: Corrects overvoltages up to 300V
  • Undervoltage Correction: Corrects undervoltages as low as 100V
    
    Surge / Noise Suppression
  • UPS AC Suppression Joule Rating: 2565
  • UPS AC Suppression Response Time: Instantaneous
  • EMI / RFI AC Noise Suppression: Yes
    
    Physical
  • Primary Form Factor: Rackmount
  • UPS Power Module Dimensions (hwd, in.): 5.14 x 17.5 x 25.82
  • Rack Height: 12U
  • Maximum Device Depth (in.): 32.5
  • Minimum Required Rack Depth (inches): 37.5
  • UPS Power Module Weight (lbs.): 43
  • UPS Power Module Weight (kg): 19.50
  • Included Battery Pack Dimensions (hwd / in.): 5.25 x 17.5 x 25
  • Included Battery Pack Weight (lbs.): 158.7
  • Shipping Dimensions (hwd / in.): 36.00 x 40.25 x 51.00
  • Shipping Weight (lbs.): 600.00
  • Cooling Method: Fans
  • UPS Housing Material: Steel
    
    Environmental
  • Operating Temperature Range: +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius.
  • Storage Temperature Range: +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius.
  • Relative Humidity: 0 to 95%, non-condensing
  • AC Mode BTU / Hr. (Full Load): 5464
  • Battery Mode BTU / Hr. (Full Load): 4864
  • AC Mode Efficiency Rating (100% Load): 90%
  • Operating Elevation (ft.): 0-3000m (0 to 10,000 ft.)
  • Audible Noise: 60 dBA at front side 1 meter
  • Operating Elevation (m): 0-3000 m
    
    Line / Battery Transfer
  • Transfer Time: No transfer time (0 ms.) in online, double-conversion mode
  • Low Voltage Transfer to Battery Power (Setpoint): 100V
  • High Voltage Transfer to Battery Power (Setpoint): 300V
    
    Certifications
  • UPS Certifications: Tested to UL1778 (USA); Tested to CSA (Canada); CE; Meets FCC Part 15 Category A (EMI); ROHS (Restriction of Hazardous Substances)
  • UPS Certification Details: IEC 61000-4-5 1995 B Surge Immunity
   

• Item Includes:

  • Two SU8000RT3UPM UPS power modules
  • Two BP240V10RT3U battery packs
  • SUPDMB20KIEC Parallel PDU with Bypass switch
  • 4-post rackmount installation rails
  • USB, DB9 & EPO cabling
   

• Warranty:

  • 2-year
   

• GTIN:

  0037332158246