-
Item# 16XB/R-HD
3 Panel Sizes AvailableThe My Custom Shop 16XB/R-HD is a handy BNC patch panel for any studio, OB truck or production rack needing a simple way to route 4K/12G-SDI signals between cameras, recorders, CCUs and more. The 16XB/R-HD employs Canare 12G Rated Recessed BNC Connectors delivering further security up to 16 critical patch points.
My Custom Shop proudly builds video rack panels and patchbays in its US facility using only quality components from suppliers such as Neutrik, Switchcraft, Canare, and Senko....
Read More
-
Item# PBXLR-12COMBO
The backbone of the PBXLR-12COMBO is its Neutrik NCJ6FI-S jacks featuring both a 3 pole XLR female receptacle and a 1/4" stereo jack in the same housing. This give you a convenient way to mix and match your connections without the hassle of adapters or specially wired cables. The folks at My Custom Shop deliver this box as a fully wired solution from front-to-back so it's a complete plug and play feedthru solution.
Custom configurations available.
Features: Conveniently Mix & Match Connections
1RU...

-
Item# 8XUHD-BNCR
The My Custom Shop 8XUHD-BNCR 4K/8K 12G-SDI BNC Patch Panel features high performing Neutrik rearTWIST UHD BNC connectors that meet SMPTE ST 2082-1 standards for 12G-SDI transmission. My Custom Shop 12G-SDI patch panels are designed for 4K/8K infrastructure and equipment patching for control rooms, production facilities and remote broadcast. Available in 1RU configuration with 8 or 16 connectors and 2RU with 16 or 32 connectors.
Features: Corrosion Resistant
Designed for 4K/8K UHD, 12G-SDI...

-
Item# EZ-EARS-3U
Now you can tilt and angle your flat-mount rackmount gear with the EZ-EARS-3U from My Custom Shop. A brilliantly simple solution delivering variable angle tiltability to video monitors, processors, audio monitors and anything else where a little tilt would go a long way.
The My Custom Shop EZ-EARS-3U mounting brackets attach to any standard equipment rack and accommodate a single unit under 5 inches deep and weighing up to 15 lbs. Thumb screw knobs allow for easy adjustment of tilting angles...

-
Item# 16CJ-BJRU
2 Patch Points AvailableMy Custom Shop proudly builds video rack panels and patchbays in their US facility using only quality components from suppliers such as Neutrik, Switchcraft, Canare, and Senko. With 20 years of experience in the custom metal plate and panel industry, My Custom Shop now offers a diverse variety of standard models in 1, 2, and 3RU sizes, with connector options including BNCs, RCAs, F-connectors, HDMI and more. Specifications:
Read More
-
Item# 8XRJ45
My Custom Shop Ethernet Patch Panels are available in 1 or 2RU sizes, and are loaded with terminated or feedthru CAT5, CAT5e, CAT6 or etherCON connectors. Proudly built in our USA facility, My Custom Shop offers quality components, workmanship, and detailed finishing work to meet the demanding needs of the Pro AV, Broadcast, and Pro-Audio industry. Specifications:

-
Item# 32CJ-X2F
My Custom Shop proudly builds audio rack panels and patchbays in their US facility using only quality components from suppliers such as Neutrik, Switchcraft, Canare, and Senko. With 20 years of experience in the custom metal plate and panel industry, My Custom Shop now offers a diverse variety of standard models in 1, 2, and 3RU sizes, with connector options including XLRs, RCAs, 1/4 and 3.5mm jacks, and more. Features: 2RU panel with 32 flush-mount male XLR-Solder connectors
Made from 16-gauge...

-
Item# WPL-2122
7 Colors AvailableMy Custom Shop standard wall plates have been designed using real customer feedback from 20 years of experience in custom metal plates and rack panels. Using quality components from vendors including Switchcraft, Neutrik and Canare, and proudly built in their USA facility, My Custom Shop wall plates feature detailed workmanship and finishing resulting in durable and reliable products for the Pro AV, Broadcast, and Pro-Audio industry. Features: Super High Quality
Consistent
Quick...
Read More
-
Item# 16XB-HD
2 Patch Points AvailableMy Custom Shop proudly builds video rack panels and patchbays in their US facility using only quality components from suppliers such as Neutrik, Switchcraft, Canare, and Senko. With 20 years of experience in the custom metal plate and panel industry, My Custom Shop now offers a diverse variety of standard models in 1, 2, and 3RU sizes, with connector options including BNCs, RCAs, F-connectors, HDMI and more. Specifications:
Read More
-
Item# WP2000
7 Colors AvailableMy Custom Shop standard wall plates have been designed using real customer feedback from 20 years of experience in custom metal plates and rack panels. Using quality components from vendors including Switchcraft, Neutrik and Canare, and proudly built in their USA facility, My Custom Shop wall plates feature detailed workmanship and finishing resulting in durable and reliable products for the Pro AV, Broadcast, and Pro-Audio industry. Features: Super High Quality
Consistent
Quick...
Read More
-
Item# 16XLRM
4 Patch Points AvailableMy Custom Shop proudly builds audio rack panels and patchbays in their US facility using only quality components from suppliers such as Neutrik, Switchcraft, Canare, and Senko. With 20 years of experience in the custom metal plate and panel industry, My Custom Shop now offers a diverse variety of standard models in 1, 2, and 3RU sizes, with connector options including XLRs, RCAs, 1/4 and 3.5mm jacks, and more. Specifications:
Read More
-
Item# 8XHDMI
2 Patch Points AvailableMy Custom Shop proudly builds video rack panels and patchbays in their US facility using only quality components from suppliers such as Neutrik, Switchcraft, Canare, and Senko. With 20 years of experience in the custom metal plate and panel industry, My Custom Shop now offers a diverse variety of standard models in 1, 2, and 3RU sizes, with connector options including BNCs, RCAs, F-connectors, HDMI, HDMI 2.0 and more. Features: Specifications: Standard 1RU Size
Grounded Panel Mount
Standard D-shape...
Read More
-
Item# 16XLRF
3 Patch Points AvailableMy Custom Shop proudly builds audio rack panels and patchbays in their US facility using only quality components from suppliers such as Neutrik, Switchcraft, Canare, and Senko. With 20 years of experience in the custom metal plate and panel industry, My Custom Shop now offers a diverse variety of standard models in 1, 2, and 3RU sizes, with connector options including XLRs, RCAs, 1/4 and 3.5mm jacks, and more. Features: Specifications:
Read More
-
Item# WP1X1
5 Types AvailableMy Custom Shop standard wall plates have been designed using real customer feedback from 20 years of experience in custom metal plates and rack panels. Using quality components from vendors including Switchcraft, Neutrik and Canare, and proudly built in their USA facility, My Custom Shop wall plates feature detailed workmanship and finishing resulting in durable and reliable products for the Pro AV, Broadcast, and Pro-Audio industry. Specifications:
Read More
-
Item# 16CJ
2 Patch Points AvailableMy Custom Shop Rack Panels are available in 1, 2 or 3RU sizes, and pre-punched for Neutrik D-Series connectors, Canare BCJ-Series connectors, feedthru barrels, or unpunched. Proudly built in our USA facility, our rack panels feature quality components, workmanship and detailed finishing to meet the needs of today's Pro AV, Pro Audio, and Broadcast industries. Features: Canare BCJ- Series BNC Panel Mounts
Canare FJ- Series F Panel Mounts
Canare RJ- Series RCA Panel Mounts
Canare XLR-3-31F77 3-Pin...
Read More
-
Item# CTX-BMICRO-1RM
We all know the Blackmagic Micro Converters are so small you can use them anywhere! So imagine the possibilities of having 8 of them side by side in a one rack unit! Well My Custom Shop has done it again and introduces the CTX-BMICRO-1RM! An anodized aluminum 1RU rack panel with cutouts that are spatially correct to match the BNC ports found on the Blackmagic Micro Converters! So whether your converting HDMI to SDI or vice versa, having the CTX-BMICRO-1RM on set...

-
Item# WPLW-1181-FT
3 Colors AvailableMy Custom Shop standard wall plates have been designed using real customer feedback from 20 years of experience in custom metal plates and rack panels. Using quality components from vendors including Switchcraft, Neutrik and Canare, and proudly built in their USA facility, My Custom Shop wall plates feature detailed workmanship and finishing resulting in durable and reliable products for the Pro AV, Broadcast, and Pro-Audio industry. Specifications:
Read More
-
Item# 16XBNCR-CAN
2 Panel Sizes AvailableMy Custom Shop proudly builds video rack panels and patchbays in their US facility using only quality components from suppliers such as Neutrik, Switchcraft, Canare, and Senko. With 20 years of experience in the custom metal plate and panel industry, My Custom Shop now offers a diverse variety of standard models in 1, 2, and 3RU sizes, with connector options including BNCs, RCAs, F-connectors, HDMI and more. Features: Protective Recessed Design
Corrosion Resistant
Designed for 4K UHD, 12G-SDI...
Read More
-
Item# BLACKSTACK-10RM
The BLACKRACK and BLACKSTACK series rackmounts from My Custom Shop are designed to work with Blackmagic Design Mini Converters. These quality rackmounts are proudly built by My Custom Shop in the USA, and allow multiple Mini Converters to be easily rackmounted in a single 1, 2 or 3RU space. Features: Includes Mounting Hardware
3RU Mounts up to 10 Mini Converters
High Density Professional Rack Mount Solution
Applications include News gathering, Sports production, Remote productions, Live events,...

-
Item# 24XB-HD
The My Custom Shop 24XB-HD is a 24-Point HD-SDI / SDI BNC Feed-Thru patch panel with isolated 12G BCJ-JRK BNC connectors. My Custom Shop proudly builds video rack panels and patchbays in their US facility using only quality components from suppliers such as Neutrik, Switchcraft, Canare, and Senko. With 20 years of experience in the custom metal plate and panel industry, My Custom Shop now offers a diverse variety of standard models in 1, 2, and 3RU sizes, with connector options including BNCs, RCAs,...

-
Item# WPL-1202
7 Colors AvailableMy Custom Shop standard wall plates have been designed using real customer feedback from 20 years of experience in custom metal plates and rack panels. Using quality components from vendors including Switchcraft, Neutrik and Canare, and proudly built in their USA facility, My Custom Shop wall plates feature detailed workmanship and finishing resulting in durable and reliable products for the Pro AV, Broadcast, and Pro-Audio industry. Features: Super High Quality
Consistent
Quick...
Read More
-
Item# WPL-1101
7 Colors AvailableMy Custom Shop standard wall plates have been designed using real customer feedback from 20 years of experience in custom metal plates and rack panels. Using quality components from vendors including Switchcraft, Neutrik and Canare, and proudly built in their USA facility, My Custom Shop wall plates feature detailed workmanship and finishing resulting in durable and reliable products for the Pro AV, Broadcast, and Pro-Audio industry. Features: Super High Quality
Consistent
Quick...
Read More
-
Item# BLACKRACK-2
Originally designed with the AJA FIDO series in mind, the folks at My Custom Shop have come up with a simply brilliant way to rackmount almost any mini converter with the BLACKRACK-2. It allows you to mount up to 16 mini converters from multiple brands in vertical, side-by-side fashion with high-density in mind. Of course, horizontal mounting is also an option if high-density needs aren't a factor.
The mounting slots of the BLACKRACK-2 deliver 3 possible installation options:...

-
Item# WPL-1107
8 Colors AvailableMy Custom Shop standard wall plates have been designed using real customer feedback from 20 years of experience in custom metal plates and rack panels. Using quality components from vendors including Switchcraft, Neutrik and Canare, and proudly built in their USA facility, My Custom Shop wall plates feature detailed workmanship and finishing resulting in durable and reliable products for the Pro AV, Broadcast, and Pro-Audio industry. Features: Super High Quality
Consistent
Quick...
Read More
-
Item# WPL-1115-TB
8 Colors AvailableMy Custom Shop standard wall plates have been designed using real customer feedback from 20 years of experience in custom metal plates and rack panels. Using quality components from vendors including Switchcraft, Neutrik and Canare, and proudly built in their USA facility, My Custom Shop wall plates feature detailed workmanship and finishing resulting in durable and reliable products for the Pro AV, Broadcast, and Pro-Audio industry. Features: Super High Quality
Consistent
Quick...
Read More