-
Item# STW-DSP100-1-CVD
The DSP100-1-CV-D is an affordable amplifier with fully integrated DSP designed to optimize the speakers and overcome the acoustical limitations of a zone. The DSP100-1-CV-D provides 100W audio power @ 70/100V. The robust, full function DSP includes a full cross-point mixer, EQ, filters, limiters, and more. A USB port makes programing simple, fast and repeatable for large installations. The remove volume control operates with a wide range of devices. You won't find a more cost effective way to bring...

Our Price: $871.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# STW-DSP1001CV
The DSP100 is an affordable amplifier with fully integrated DSP designed optimize the speakers and acoustical limitations of a zone. The DSP100 comes in three versions, a 1x100W 70/100V, 2x100W 70/100V, and 2x100W at 4/8 Ohms. Each is available with a Dante network option. The robust, full function DSP includes 3 gain stages, filtering, compressors, limiters, parametric EQ and more. A USB port makes programing simple, fast and repeatable for large installations. The optional factory installed Dante...

-
Item# CVA25-1
The sub compact CVA-25-1 and CVA-50-1 are built to meet the rigorous demands of high quality commercial, industrial and Pro Audio sound installations. Low cost, lightweight and convection cooling make this Class D amplifier flexible enough for a broad range of applications requiring quiet amplification. With an extremely compact form factor, the CVA's allow amplification to be located in places normally off limits to standard amplifiers without compromising sound or power. The Plenum rating (UL...

-
Item# STW-CVA40-1-CV-D
Stewart Audio CVA40-1-CV-D is a single channel PoE++ (60W port power or injector) Dante™ amplifier in a plenum-rated, compact, flange mount enclosure.
The PoE++ Amplifier Series leverages the higher power 802.3bt PoE++ standard (60W port power) to power two amplifier models, the AV20-2-LZ-D (20W x 2 @ 4/8Ω) and the CVA40-1-CV-D (40W x 1 @ 70V/100V). These compact Dante™ amplifiers are designed to be single cable solutions for small/medium zones without the need for a...

Our Price: $544.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# STW-AV8-2-LZ-D
The PoE+ Amplifier Series leverages the higher power 802.3at PoE+ standard (30W port power) to power two amplifier models, the AV8-2-LZ-D (8W x 2 @ 4/8 Ohm) and the CVA16-1-CV-D (16W x 1 @ 70V/100V). These compact Dante amplifiers are designed to be single cable solutions for smaller zones without the need for a local power outlet. This amplifier series leverages the ubiquitous nature of existing CAT 5e/6 cable in zones and also the inexpensive process of pulling new cable to zones. It creates an...

Our Price: $498.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# AV25-2
The sub compact AV25 is built to meet the rigorous demands of high quality commercial, industrial and Pro Audio sound installations. Low cost, lightweight and convection cooling make this Class D amplifier flexible enough for a broad range of applications requiring quiet amplification. With an extremely compact form factor, the AV25 allows amplification to be located in places off limits to normal amplifiers without compromising sound or power. Like all Stewart products, the AV25 is designed for...

-
Item# AV30MX-2
The sub compact AV30MX-2 is built to meet the rigorous demands of high quality commercial, industrial and Pro Audio sound installations. Low cost, lightweight and convection cooling make this Class D mixer amplifier flexible enough for a broad range of applications requiring quiet amplification. With an extremely compact form factor, the AV30MX-2 allows amplification to be located in places off limits to normal mixer amplifiers without compromising sound or power.
Like all Stewart products, the...

-
Item# CVA 50MX-1
The sub compact CVA50MX-1 is built to meet the rigorous demands of high quality commercial, industrial and Pro Audio sound installations. Its versatile design allows for maximum application flexibility while still maintaining the compact, lightweight form factor of Stewart Audio's CVA Series of amplifiers. The CVA50MX-1 includes an adjustable gain microphone input with a configurable ducking setting allowing the speaker to easily talk over any other channel.
With its variety of inputs and the...

Our Price: $390.37
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# CVA25-1-25V
The sub compact CVA25-1 25V is built to meet the rigorous demands of high quality commercial, industrial and Pro Audio sound installations. Low cost, lightweight and convection cooling make this Class D amplifier flexible enough for a broad range of applications requiring quiet amplification. With an extremely compact form factor, the CVA25-1 25V allows amplification to be located in places normally off limits to standard amplifiers without compromising sound or power. The Plenum rating (UL 2043)...

Our Price: $246.17
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# CVA50-1
The sub compact CVA-25-1 and CVA-50-1 are built to meet the rigorous demands of high quality commercial, industrial and Pro Audio sound installations. Low cost, lightweight and convection cooling make this Class D amplifier flexible enough for a broad range of applications requiring quiet amplification. With an extremely compact form factor, the CVA's allow amplification to be located in places normally off limits to standard amplifiers without compromising sound or power. The Plenum rating (UL...

Our Price: $283.25
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# STW-AV20-2-LZ-D
The Stewart Audio AV20-2-LZ-D is a 2 channel PoE++ (60W port power or injector) Dante™ amplifier in a plenum-rated, compact, flange mount enclosure. PoE++ Amplifier Series leverages the higher power 802.3bt PoE++ standard (60W port power) to power two amplifier models, the AV20-2-LZ-D (20W x 2 @ 4/8?) and the CVA40-1-CV-D (40W x 1 @ 70V/100V). These compact Dante™ amplifiers are designed to be single cable solutions for small/medium zones without the need for a local power outlet....

-
Item# STW-AV25-2NET-D
The AV25-2 NET and NET+ are subcompact 35/25W x 2 at 4/8 ohms networkable power amplifiers built to meet the rigorous demands of high quality commercial, industrial and Pro Audio sound installations. The AV25-2 Net version is designed with a network only signal input, while the NET+ version has both Network and local legacy inputs. A priority switch on the rear allows for selective ducking of either signal to allow one amplifier to do the work of two. These versatile dual input amplifiers allow...

Our Price: $472.77
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# STW-CVA16-1-CV-D
The PoE+ Amplifier Series leverages the higher power 802.3at PoE+ standard to power two amplifier models, the AV8-2-LZ (8W x 2 @ 4/8 Ohm) and the CVA16-1-CV (16W x 1 @ 70V/100V). These compact amplifiers are designed to be single cable solutions for smaller zones where local power may not be available. This amplifier series leverages the ubiquitous nature of existing CAT 5e/6 cable in zones and also the inexpensive process of pulling new cable to zones. It creates an opportunity to reduce labor...

Our Price: $514.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# STW-CVA50-1NET-D
The CVA50-1 NET and NET+ are subcompact 50W mono 70V/100V networkable power amplifiers built to meet the rigorous demands of high quality commercial, industrial and Pro Audio sound installations. The CVA50-1 NET version is designed with a network only signal input, while the Net+ version has both Network and local legacy inputs. A priority switch on the rear allows for selective ducking of either signal to allow one amplifier to do the work of two. These versatile dual input amplifiers allow for...

Our Price: $483.07
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# STW-CVA50PMX1-70
The sub compact CVA50PMX-1 is built to meet the rigorous demands of high quality commercial, industrial and Pro Audio sound installations. Its versatile design allows for maximum application flexibility while still maintaining the compact, lightweight form factor of Stewart Audio's CVA Series of amplifiers. The CVA50PMX-1 includes an adjustable gain microphone input with a configurable ducking setting allowing the speaker to easily talk over any other channel. With its variety of inputs and the...

Our Price: $390.37
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# STW-CVA50PMX1100
The sub compact CVA50PMX-1 is built to meet the rigorous demands of high quality commercial, industrial and Pro Audio sound installations. Its versatile design allows for maximum application flexibility while still maintaining the compact, lightweight form factor of Stewart Audio's CVA Series of amplifiers. The CVA50PMX-1 includes an adjustable gain microphone input with a configurable ducking setting allowing the speaker to easily talk over any other channel. With its variety of inputs and the...

Our Price: $390.37
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# STW-DSP100-2-CV
The DSP100 is an affordable amplifier with fully integrated DSP designed optimize the speakers and acoustical limitations of a zone. The DSP100 comes in three versions, a 1x100W 70/100V, 2x100W 70/100V, and 2x100W at 4/8 Ohms. Each is available with a Dante network option. The robust, full function DSP includes 3 gain stages, filtering, compressors, limiters, parametric EQ and more. A USB port makes programing simple, fast and repeatable for large installations. The optional factory installed Dante...

Our Price: $663.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# STW-DSP100-2-CVD
The DSP100-2-CV-D is an affordable amplifier with fully integrated DSP designed to optimize the speakers and overcome the acoustical limitations of a zone. The DSP100-2-CV-D provides 100W from each of the two 70/100V output channels. The robust, full function DSP includes a full cross-point mixer, EQ, filters, limiters, and more. A USB port makes programing simple, fast and repeatable for large installations. The remove volume control operates with a wide range of devices. You won't find a more...

Our Price: $1,039.00
Availability: Extended Lead Time. Email, Chat or Call Us for more details.
Add to Wish List
-
Item# STW-DSP100-2-LZ
The DSP100 is an affordable amplifier with fully integrated DSP designed optimize the speakers and acoustical limitations of a zone. The DSP100 comes in three versions, a 1x100W 70/100V, 2x100W 70/100V, and 2x100W at 4/8 Ohms. Each is available with a Dante network option. The robust, full function DSP includes 3 gain stages, filtering, compressors, limiters, parametric EQ and more. A USB port makes programing simple, fast and repeatable for large installations. The optional factory installed Dante...

Our Price: $649.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# STW-DSP100-2-LZD
The DSP100-2-LZ-D is an affordable amplifier with fully integrated DSP designed to optimize the speakers and overcome the acoustical limitations of a zone. The DSP100-2-LZ-D provides 100W from each channel into 8 Ohms. The robust, full function DSP includes a full cross-point mixer, EQ, filters, limiters, and more. A USB port makes programing simple, fast and repeatable for large installations. The remove volume control allows volume control from a wide range of devices. You won't find a more cost...

Our Price: $1,024.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# STW-MC850-CV-D
The Stewart Audio MC850-CV-D is a 50w x 8 @ 70/100v 1 RU Dante Amplifier with Ethernet Reporting and Control. The MC850 series is family of multi- channel Dante amplifiers expanding the reach of the audio network. With 8 channels and 50W of output per channel, this compact 1RU commercial amplifier offers incredible value and flexibility. The MC850 includes three models to cover those applications where low impedance is required, constant voltage or mixed impedances.
Features: Dante Brooklyn interface
2...

Our Price: $2,058.97
Availability: Extended Lead Time. Email, Chat or Call Us for more details.
Add to Wish List
-
Item# STW-MC850-LZ-D
The Stewart Audio MC850-LZ-D is a 50w x 8 @ 8Ω 1 RU Dante Amplifier with Ethernet Reporting and Control. The MC850 series is family of multi- channel Dante amplifiers expanding the reach of the audio network. With 8 channels and 50W of output per channel, this compact 1RU commercial amplifier offers incredible value and flexibility. The MC850 includes three models to cover those applications where low impedance is required, constant voltage or mixed impedances. Features: Dante Brooklyn interface
2...

Our Price: $1,894.17
Availability: Extended Lead Time. Email, Chat or Call Us for more details.
Add to Wish List
-
Item# STW-MC850-MXZ-D
The Stewart Audio MC850-MXZ-D is a 50w x 2 @ 8Ω / 50w x 6 @ 70/100v 1 RU Mixed Impedance Dante Amplifier with Ethernet Reporting and Control. The MC850 series is family of multi- channel Dante amplifiers expanding the reach of the audio network. With 8 channels and 50W of output per channel, this compact 1RU commercial amplifier offers incredible value and flexibility. The MC850 includes three models to cover those applications where low impedance is required, constant voltage or mixed impedances....

Our Price: $2,058.97
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List