-
Item# WW-THS4
The THS 4 Talkback/Headphone box is an all-purpose, fully loaded sports announcer console. Both main and talkback microphone outputs are provided, with Mic On/Off, Cough and Talkback switches for control. The talkback output is line level with a trim control and the main microphone output of the THS 4 will be live on-air if power is lost, when using dynamic microphones.
There are two inputs for the headphones with balanced and unbalanced connections.Each input has a volume control and assign...
Our Price: $470.00
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# SPLIT-6
Use this handy box when you need to split a line level signal up to 6 times*. Features 1 female XLR input wired to 6 male XLR outputs. Perfect when adding extra amplifiers to a system, connecting multiple powered speakers, splitting intercom lines, etc.
*Line level outputs can usually be split 6 times without noticeable loss of signal quality. The actual number of splits that can be accomplished depends on the level of the source signal and the impedances of...
-
Item# PA-1
The Whirlwind PA-1 is a high output, low distortion, portable monitoring device suitable for critical listening in any professional audio environment.
The PA-1 accepts either balanced or unbalanced stereo, line level signals through parallel XLR and 1/4" TRS inputs.
A switch changes the input connector configuration from separate balanced inputs to combination unbalanced (Tip/Pin2 = Left, Ring/Pin3 = Right) for accepting signals from sources such as headphone...
Our Price: $239.00
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# WW-THS3
The THS 3 Talkback/Headphone box is an all-purpose, fully loaded sports announcer console. Both main and talkback microphone outputs are provided, with Mic On/Off, Cough and Talkback switches for control. The talkback output is line level with a trim control and the main microphone output of the THS 3 will be live on-air if power is lost, when using dynamic microphones.
There are two assignable inputs for the headphones with balanced and unbalanced connections. Each input can be assigned to left,...
Our Price: $473.00
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# WW-PCDI
The Whirlwind pcDI is perfect for interfacing the outputs of CD players, computer sound cards, iPODs® / MP3 players, tape decks, etc. with professional, balanced, low impedance equipment.
This unit contains two separate DIs - input your signals with one 3.5mm (1/8") mini TRS stereo jack (tip=left +, ring=right +, sleeve=common negative) or two sets of color coded RCA phono type input and through jacks. Output is via corresponding color coded XLRs.
Features: Color coded RCA phono in / through...
Our Price: $162.00
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# WW-SBNL18442
The Whirlwind SBNL18442 is part of the SBNL Series and is a (1) NL8, (4) NL4 wired 2-pole NL Speakon Splitter Box.The SBNL series of boxes provide a convenient way to split or breakout NL Speakons for multiple speaker cabinet hookup.
Features: Specifications:
-
Item# IMP-2
The IMP-2 is an economical alternative perfect for all of your direct box needs. Built rugged on the inside and outside, this is the world famous DI found in pro systems everywhere. The IMP 2 converts a line or instrument level unbalanced signal to a low impedance mic level balanced signal. The IMP-2 includes a ground lift switch and 1/4"/XLR inputs/outputs. Features: 1/4" parallel wired in/out jacks
Ground Lift switch to help isolate hum and buzz
Uses Whirlwind's TRHL transformer Specifications:...
Our Price: $64.00
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# MICMUTE-PPD
The Whirlwind Micmute boxes offer passive switching solutions for controlling the on and off conditions of a microphone or balanced line signal via footswitch or finger switch operation.
There are three styles, which cover all the essential mic control functions. Each style of Micmute is available with two types of actuator; a heavy duty footswitch (models PT, PM, PP) and a finger operated version for desktop use (models PTD, PMD, PPD).
Each box has a female XLR input and a male XLR output...
-
Item# EDB1
For your consideration! Whirlwind now offers a high quality, import designed, direct box offering rugged construction while maintaining exceptional sound quality while still flashing a cost effective price tag!
Features: 1/4" In and Through jacks
XLR output
Pad switch for connection to "hot" signal sources
Ground Lift switch to help isolate hum and buzz
Metal construction and quality transformer
Specifications: Input Impedance: 20k Ohms
Output Impedance: 150 Ohms
Frequency Response: 20Hz-20kHz...
Our Price: $46.00
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# WW-PCDI-HW
The Whirlwind pcDIhwb is a PCDI with a hard wired tail terminated with a stereo 3.5mm plug, perfect for interfacing the outputs of CD players, computer sound cards, iPODs / MP3 players, tape decks, etc. with professional, balanced, low impedance equipment (with no chance of losing the cable).
This unit contains two separate DIs - input your signals with one hard wired, 30 inch 3.5mm (1/8") mini TRS stereo plug, two sets of color coded RCA phono type input and through jacks or 1/4" TS input jacks....
Our Price: $196.00
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# ISOXL
This is a professional quality compact transformer in an XLR male/female tube for quick fix line isolation. The shield is lifted from input to output.
-
Item# LM2U
These handy boxes can be used to match consumer grade audio devices (-10dB) to pro equipment (+4dB). These units convert the level and provide the conversion from balanced to unbalanced operation and vice-versa. Features: XLR, TRS mini and RCA phono jacks
Level controls
Active circuitry, power by Whirlwind PS24 supply (included) Specifications: Frequency Response 20-20 kHz at unity gain, +/- .1 dBv
Total Harmonic Distortion +noise < .0015% 20-20kHz at unity gain; < .0024% 20-20 kHz, +4 to -10...
Our Price: $136.00
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# WW-ISO1
Use it to isolate lines to fight hum and buzz in broadcast or live sound applications,
or convert unbalanced lines to balanced for long cable runs.
A ground lift switch is provided to disconnect the input ground to the output.
Our Price: $117.00
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# LIFTER
Ideal for troubleshooting ground problems, this female-to-male XLR 3-pin inline device disconnects pin 1 between the connectors. It isolates the ground of a balanced audio signal without requiring you to cut the cable's shield wire.
-
Item# IMPAD10
2 Models AvailableInput a line signal into a mic pre or match levels between two pieces of gear with these precision in-line H-pads.
Available in 10, 20, 30, and 40dB attenuation versions, a set of IMP PADs is a necessity for every complete audio toolkit.
Input Impedance (3-pin female XLR): 1k Ohms
Output Impedance (3-pin male XLR): 150 Ohms
Read More
-
Item# DA-2
In normal (stereo) mode, the Whirlwind/US Audio DA-2 provides four outputs per each of two inputs. A front panel COMBINE switch applies both inputs to all 8 outputs, where the DA-2 becomes a one or two in, eight out DA.
Each output is ground lifted and has its own level control and clip indicator light. Input signals are monitored by signal-present LEDs and clip LEDs. The headphone circuit can be switched to monitor either channel.
All audio connections are made through actively balanced...
-
Item# DIRECT-2
1/4" parallel wired in/out jacks / Ground Lift switch to help eliminate hum and buzz / -20dB pad switch for connection to input signals
The DIRECT2 combines features found on two of Whirlwind's DIRECTOR direct boxes into one unit. Perfect for converting unbalanced signals from Stereo keyboards, acoustic Guitar preamps, CD and tape players, Computer Sound cards, etc. The Input and Output grounds of each section are isolated from each other. This allows the DIRECT2 to be used as if it were two completely...
Our Price: $142.00
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# DIRECT-JT
Our top-of-the-line passive DI features the Jensen JT-DB-EPC transformer - world renown for wide frequency response and superior noise rejection characteristics.
Extruded aluminum housing with recessed switches provides expected Whirlwind durability. Features: 1/4" input jacks can be used as "INPUT / THRU" or they may be combined with the "COMBINE" pushbutton to safely sum stereo feeds to a single channel.
"FILTER / OFF" button engages a filter that emulates the frequency response of a microphone...
Our Price: $224.00
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# HOTBOX
Whirlwind's top of the line active DI. The Hot Box provides super clean front-end circuitry that delivers frequency response that rivals the priciest direct boxes on the market. With its high impedance input, the Hot Box reveals hidden harmonics from guitars and other instruments. Features include a ground-lift switch and an LED which indicates "ON" status. Operates with two (2) 9 volt batteries (not included) or phantom power.
Features: 1/4" parallel wired in/out jacks
Ground Lift switch to...
Our Price: $155.00
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# IMCOM
This versatile box is built with our premium TRSP-2 transformer for optimum durability. Features a phase reverse switch which flips the polarity of Input #2.
Connections are female XLRs in, male XLR out. Features: Use fewer input channels by combining two mic lines into one.
Use the polarity reverse switch to combine two mics - one with polarity reversed - to remove background noise and feedback or combine and correct polarity when using a pair of mics above and below a drum or in front and...
Our Price: $119.00
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# IMP
Some mixers have 1/4", unbalanced inputs designed for high impedance mics and won't accept standard balanced, low impedance microphones.
This inline transformer with female XLR - 1/4" TS plug is the solution for making that connection.
Our Price: $21.95
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# IMP1X2
The Whirlwind SP1X2 mic splitter provides one direct and one transformer isolated output from a mic level input. Each transformer isolated output on these devices features a ground lift switch.
On the IMP Splitters are male XLR jacks, one female XLR jack and one switch as outlined below.
INPUT
Female XLR input jack for connection of a low impedance balanced signal such as that of a microphone.
DIRECT OUTPUT and ISOLATED OUTPUT
Male XLR jacks. The DIRECT...
Our Price: $116.00
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# IMPHR
The phase reverse offers a temporary solution to fix a miswired mic or cable. This female-to-male XLR 3-pin inline device reverses the connection of Pins 2 and 3 between the connectors, which flips the polarity of a balanced audio signal.
Our Price: $16.00
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# ISO2
The Whirlwind ISO-2 is a two channel isolation box and line balance.
As an isolation unit, use it to isolate lines to press and video feeds or on-stage power amps. It's a handy hum and buzz fighter for broadcast or live sound applications.
As a balance. it converts unbalanced lines from CD players, tape decks, etc. to balanced for long cable runs. Features: XLR or 1/4" input
Ground-lift button
Polarity reverse button (Channel 2 only)
Whirlwind's own TRSP-600 transformers...
Our Price: $192.00
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# LBS
This handy tool balances and isolates a single line level signal or lets you send a line level signal to two destinations with transformer balancing and isolation for one or both of the outputs.
The balancing provides superior noise rejection when you have equipment with unbalanced outputs that need to feed equipment with balanced inputs. The transformer isolation helps eliminate unwanted hum and buzz caused by power line and grounding issues.
In ISO mode the signal is passed directly through...
Our Price: $125.00
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List
