Narrow Results:

• 

  Cabletronix CT-FAN3-QTRK-B 19 Inch Rack Mount High Velocity Triple Fan Blowers

  19 Inch rack mountable high velocity triple fan blower. Draws air in from the bottom of the chassis and out the front of the chassis. 1RU (1.75 Inch) high, front panel power selector switch, ultra quiet model. The CT-FAN3-QTRK-B is a rack mountable ventilation system that incorporates 3 individual fans in a single rack space (1.75") housing. A single power output is attached to all three fans to minimize the number of outlets needed. The fans draw air in from the bottom of the chassis and out...

  

  Read More

  Item #: CT-FAN3-QTRK-B

  Availability: In Stock

  Our Price: $162.75

  Add to Wishlist
• 

  Middle Atlantic 10 Inch Fan Top for WRK MRK DRK VRK and VMRK Series

  Integrated fan tops save time and money, and simplify ordering Features: Includes proportional speed thermostatic fan control to ensure that fans only run when needed, extending fan life, reducing noise and maintenance requirements Ships complete, with installed 10" or 4-1/2" quiet fans Available for all Middle Atlantic Products welded floor standing enclosures UL Listed in the US and Canada

  

  5 Types Available

  Item #: MW-10FT-FC

  Availability: In Stock

  Our Price: $461.00

  Add to Wishlist
• 

  Tripp Lite SRXUPANEL 19-Inch Blanking Panel Kit 4 Pieces

  The SRXUPANEL Blanking Panel Kit fills unused spaces in your standard 19-inch rack. Not only does this give your rack a sleek, clean look, but it also protects your valuable rack equipment by improving airflow and cooling efficiency. By closing off unused rack openings, these blanking panels prevent hot air from recirculating through open spaces. This reduces operating costs, improves performance and provides longer lifespans for your equipment.Constructed from heavy-duty cold-rolled...

  

  Read More

  Item #: TRL-SRXUPANEL

  Availability: Usually ships in 3-10 business days

  Our Price: $48.34

  Add to Wishlist
• 

  ATM 00-701-18 Cool Stick Enclosure Ventilator for Cooling Flat Panel Displays Into Walls or Cabinets - 18 Inch

  Designed to quietly cool flat-panel displays recessed into walls or cabinets. While no one device is suitable for ventilating every installation, Cool-stick™ is the answer to many problems. Cool-stick avoids heat problems with its 8 quiet fans blowing a stream of air across the back of a display. Comes with mounting brackets, and is small enough to squeeze behind, below, or above displays in all but the tightest situations. Also useful for mounting behind components in very tight quarters,...

  

  Read More

  Item #: ATMG-00-701-18

  Availability: Usually ships in 3-10 business days

  Our Price: $205.00

  Add to Wishlist
• 

  Blackmagic Design BMD-CFM-OG3 OG3 Spare 2RU Cooling Fan Kit

  The BMD-CFM-OG3 is a Blackmagic spare 2RU cooling fan kit for the openGear OG3-FR. Features: Specifications: Weight: 4.0 lbs

  

  Read More

  Item #: BMD-CFM-OG3

  Availability: Usually ships in 3-10 business days

  Our Price: $554.00

  Add to Wishlist
• 

  Middle Atlantic CAB-COOL-2 Quiet-Cool Series Cabinet Cooler - 40 CFM 120V

  Remove heat generated by components located in smaller cabinets and entertainment centers. Operating only when needed to minimize dust, this quiet cooling device features an aesthetically designed vent that can be painted to match its environment. The quiet, internal fan activates automatically when temperatures generated by hot-running equipment reach damaging levels.

  

  Read More

  Item #: MAP-CAB-COOL-2

  Availability: In Stock

  Our Price: $175.00

  Add to Wishlist
• 

  ATM 03-124-01 Cool-Control - Rack Mount Thermal Switch for Automatic Operation of Cooling Systems

  Cool-control is the inexpensive way to add automatic thermal control to manually-controlled cooling systems. Racks that are sold with fans but without thermal control and manually-controlled cooling systems from other manufacturers are easily converted to fully automatic operation with either the rack- or table-mounted Cool-control. As a bonus, Cool-control adds continuous temperature readout on its bright display. Installation is as easy as plugging the Cool-control into any AC socket and plugging...

  

  Read More

  Item #: ATMG-03-124-01

  Availability: Usually ships in 3-10 business days

  Our Price: $162.00

  Add to Wishlist
• 

  ATM 00-201-02 System 2 Cooling Kit - with 2 Fans Control Unit Thermal Sensor and Power Supply

  The Active Thermal Management System 2 and 2 + 2 kits are self-contained ventilating systems for small-to-midsize enclosures with moderate heat loads. The major individual components are the 2-speed control unit, power supply, temperature sensor/probe, and two (2) or four (2+2) 4.7 inch/120mm fans. Features: Extremely quiet Good for mid-size cabinets 2-speed Specifications: Product: System 2 Kit Fans: 2/120mm Airflow (free air): 20-40 CFM Noise level: 21 dBA Control: Thermal - 2 speeds

  

  Read More

  Item #: ATMG-00-201-02

  Availability: Usually ships in 3-10 business days

  Our Price: $279.00

  Add to Wishlist
• 

  NTI E-T-E7 Probe Style Temperature Sensor for E-MICRO & E-MINI-LXO Systems

  The NTI E-T-E7 CAT5 connection cable between the E-MINI-LXO / E-MICRO-T(RHP) and the RJ45 Sensors is terminated with RJ45 connectors and must be wired according to the EIA/TIA 568 B industry standard. Features: Operating Temperature Range:32°F to 104°F (0 to 40°C) Accuracy: ñ1.35°F (ñ0.75°C).

  

  Read More

  Item #: NETT-E-T-E7

  Availability: Usually ships in 3-10 business days

  Our Price: $35.00

  Add to Wishlist
• 

  Middle Atlantic FAN 4.5 Inch Muffin Fan for Rack

  Featuring smooth, ball bearing design for extra quiet operation, our 115V fans come in 4 1/2" and 10" models. Hardware and power cord included with each unit. 95 CFM. 39 dB Noise Rating.

  

  6 Versions Available

  Item #: FAN

  Availability: Usually ships in 3-10 business days

  Our Price: $58.50

  Add to Wishlist
• 

  Mid-Atlantic 5-FAN-K 2 4.5In. Low-Profile Fans for SLIM 5 Series Racks

  Middle Atlantic 5-FAN-K 2 4.5 Inch Low-Profile Fans for SLIM 5 Series Racks

  

  Read More

  Item #: 5-FAN-K

  Availability: Usually ships in 3-10 business days

  Our Price: $125.50

  Add to Wishlist
• 

  ATM 00-100-02 System 1 - 4 Inch In-line Cooling System for Overheated Systems and Enclosures - Indoor Use

  The 00-100-02 is ATM's most powerful and flexible air moving system, the System 1 is available in two versions. The in-line version is suitable for indoor use, while the EXT version is mounted in a weatherproof enclosure, suitable for outdoor use in virtually any climate. Both can move over 100 CFM while producing very little noise, thanks to a precision-balanced rotor. The in-line version is now Energy Star rated; airflow has been increased by 40% to 140 CFM, power...

  

  Read More

  Item #: ATMG-00-100-02

  Availability: Usually ships in 3-10 business days

  Our Price: $559.00

  Add to Wishlist
• 

  ATM 00-100-03 System 1 - 4 Inch In-line Cooling System for Overheated Systems and Enclosures - Outdoor Use

  The 00-100-03 is ATM's most powerful and flexible air moving system, the System 1 is available in two versions. The in-line version is suitable for indoor use, while the EXT version is mounted in a weatherproof enclosure, suitable for outdoor use in virtually any climate. Both can move over 100 CFM while producing very little noise, thanks to a precision-balanced rotor. The in-line version is now Energy Star rated; airflow has been increased by 40% to 140 CFM, power...

  

  Read More

  Item #: ATMG-00-100-03

  Availability: Usually ships in 3-10 business days

  Our Price: $624.00

  Add to Wishlist
• 

  ATM 00-120-01 Cool Cube Air Mover with 6 Feet of 3 Inch Flexible Tubing - with 5 120mm Fans

  There are times when a situation calls for the System 1's ability to move hot air through a tube to somewhere else but there's just not enough room for the System 1's tubing or centrifugal blower. Cool-cube E was developed for the home theater design and installation community. Combining a compact power module with either 4 or 3 flexible tubing, Cool-cube will pull heated air out of a closed mid-size cabinet, small closet, or enclosed video projector and quietly move it to a nearby...

  

  Read More

  Item #: ATMG-00-120-01

  Availability: Usually ships in 3-10 business days

  Our Price: $395.00

  Add to Wishlist
• 

  ATM 00-120-04 Cool Cube Air Mover with 8 Feet of 4 Inch Flexible Tubing - with 5 120mm Fans

  There are times when a situation calls for the System 1's ability to move hot air through a tube to somewhere else, but there's just not enough room for the System 1's tubing or centrifugal blower. Cool-cube E was developed for the home theater design and installation community. Combining a compact power module with either 4 or 3 flexible tubing, Cool-cube will pull heated air out of a closed mid-size cabinet, small closet, or enclosed video projector and quietly move it to a nearby...

  

  Read More

  Item #: ATMG-00-120-04

  Availability: Usually ships in 3-10 business days

  Our Price: $389.00

  Add to Wishlist
• 

  ATM 00-200-02 System 2 Venting Solutions with 2 Fans and Drive Electronics on a 1/8 Inch Black Mounting Plate

  The Active Thermal Management System 2, a self-contained ventilating system for small-to-midsize enclosures with moderate heat loads, has been redesigned. It consists of two 120mm fans on a mounting board which also holds a thermal control board with a remote sensor. A small display on the control board is meant for set-up only. It reads in degrees Celsius, not Fahrenheit. The System 2 is mounted over a 14 1/2" x 5 1/2" rectangular hole (not exact - verify this dimension with the System 2 to be...

  

  Read More

  Item #: ATMG-00-200-02

  Availability: Usually ships in 3-10 business days

  Our Price: $314.00

  Add to Wishlist
• 

  ATM 00-202-02 System 2plus2 Kit - with 4 Fans 4 Finger Guards Power Supply and Thermal Sensor

  The Active Thermal Management System 2 and 2 + 2 kits are self-contained ventilating systems for small-to-midsize enclosures with moderate heat loads. The major individual components are the 2-speed control unit, power supply, temperature sensor/probe, and two (2) or four (2+2) 4.7 inch/120mm fans. Features: Very quiet Good for larger cabinets Larger heat loads 2 speed Specifications: Product: System 2+2 Kit Fans: 4/120mm Airflow (free air): 40-80 CFM Noise level: 23 dBA Control: Thermal - 2...

  

  Read More

  Item #: ATMG-00-202-02

  Availability: Usually ships in 3-10 business days

  Our Price: $359.00

  Add to Wishlist
• 

  ATM 00-301-03 Cool Stack 1 Exhaust 1U Rack-Mount Ventilator with Remote Thermal Probe and Power Supply

  Cool-stack I is the cooling solution for small to mid-sized racks. Connecting to the chassis through a 4' cable, the thermal control lets Cool-stack I's operation be controlled by the temperature of a component in the rack. This means fans can turn on later and stay on until residual heat has been removed from the component being cooled. Cool-stack I is a 1 RU high true rack-mount ventilator. Very quiet in operation, it mounts above the heat producing equipment and pulls the heated air up and...

  

  Read More

  Item #: ATMG-00-301-03

  Availability: Usually ships in 3-10 business days

  Our Price: $335.00

  Add to Wishlist
• 

  ATM 00-302-02 Cool Stack 1 Intake 1U Rack-Mount Ventilator with Remote Thermal Probe and Power Supply

  Cool-stack I is the cooling solution for small to mid-sized racks. Connecting to the chassis through a 4' cable, the thermal control lets Cool-stack I's operation be controlled by the temperature of a component in the rack. This means fans can turn on later and stay on until residual heat has been removed from the component being cooled. Cool-stack I is a 1 RU high true rack-mount ventilator. Very quiet in operation, it mounts above the heat producing equipment and pulls the heated air up and...

  

  Read More

  Item #: ATMG-00-302-02

  Availability: Usually ships in 3-10 business days

  Our Price: $335.00

  Add to Wishlist
• 

  ATM 00-303-01 Cool stack II 2U Rack-mount Ventilator with Thermal Probe and Power Supply

  With six 120mm fans and an 18" depth, the Cool-stack II has the power - and the reach - to pull up to 130 CFM of hot air out of tightly-packed racks while generating low noise levels. The Cool-stack II has two temperature-controlled speeds, and will change speeds as rack temperature changes to satisfy the requirements of residential and commercial installations; in either case, heated air can be expelled through the perforated front panel or through ports on the top or rear panels using optional...

  

  Read More

  Item #: ATMG-00-303-01

  Availability: Usually ships in 3-10 business days

  Our Price: $550.00

  Add to Wishlist
• 

  ATM 00-304-01 Cool Stack III 1U Rack-mount Ventilator with Thermal Probe Power Supply & Hardware Bag

  With the height of the Cool-stack I and the depth of the Cool-stack II, Cool-stack III is a 1-unit high hot air exhaust system for mid-size racks with mid-size heat loads! With four 120mm fans and an 18" depth, the Cool-stack III can pull up to 70 CFM of hot air out of tightly-packed racks while generating very low noise levels. Heated air is normally exhausted through the perforated front panel, but exhaust fittings and tubing (provided) can move the hot air safely away to the rear if the rack...

  

  Read More

  Item #: ATMG-00-304-01

  Availability: Usually ships in 3-10 business days

  Our Price: $450.00

  Add to Wishlist
• 

  ATM 00-306-01 Cool Rack Automatic Exhaust System for small-to-mid Size Racks - with 4 80mm Fans

  Cool-rack is a 2 rack-unit high exhaust system for small-to-mid size racks. Moving about 120 CFM very quietly, it is completely automatic, due to a self-contained thermal display and control module. Factory programmed to turn the fans on at 90F and off at 85F, these settings are easily changed in the field using the front panel buttons. Installation is as easy as mounting the Cool-rack in the rack, plugging the wall-type supply into an AC outlet and its output lead into the Cool-rack's power input...

  

  Read More

  Item #: ATMG-00-306-01

  Availability: Usually ships in 3-10 business days

  Our Price: $349.00

  Add to Wishlist
• 

  ATM 00-400-01 System 3e Small Enclosure Cooling System - with Two 80mm Fans Power Supply and Remote Thermal Probe

  The ATM System 3E is a small, thermally-activated ventilation system for smaller installations. Ideal for the bedroom audio system tucked into a nightstand or the CPU in a kitchen cabinet. The System 3 is also ideal for use within a larger enclosure, where pockets of heated air must be dispersed. Two 80mm fans (3 1/8 square, 1 thick) connect to a small control unit, which also contains plug-in connections for the power supply and thermal probe. The fans are mounted in the enclosure...

  

  Read More

  Item #: ATMG-00-400-01

  Availability: Usually ships in 3-10 business days

  Our Price: $129.00

  Add to Wishlist
• 

  ATM 00-401-01 SEC-1 Small Enclosure Cooler - with Two Fans Thermal Control Assembly Fan Mounting Plate and Power Supply

  The Small Enclosure Cooler is designed to make cooling smaller enclosures easier than ever. Two 80 mm fans are pre-assembled to a thin panel which mounts over a simple rectangular cutout on a small cabinet's back panel. With a remote thermal probe that easily fastens to the component whose temperature is being monitored, installation is quick and simple. An important feature of the SEC-1 is its ability to turn on automatically at 90 degrees to deal with the heat generated by today's audio-video...

  

  Read More

  Item #: ATMG-00-401-01

  Availability: Usually ships in 3-10 business days

  Our Price: $135.00

  Add to Wishlist
• 

  ATM 00-502-MA Cool Vent II Intake Self-contained Air Moving Device for use in Enclosures with 4 80mm Fans - Maple

  There are some installations in which you can't hide the fan grilles, no matter how hard you try! When vent openings are going to be visible, Cool-vent II or III may be the answer. Shipped in intake mode, each can be reconfigured to quietly move air out of an enclosure, and consists of a fan assembly and a very high quality wood grille. Cast aluminum grilles are also available, made by made by Reggio Register, the leading supplier of HVAC grilles and registers in the U.S. Cool-vents II and III...

  

  Read More

  Item #: ATMG-00-502-MA

  Availability: Usually ships in 3-10 business days

  Our Price: $349.00

  Add to Wishlist

Newsletter Sign Up

Weekly email with exclusive deals, unique new products, how-to videos and so much more!

Download the Newest Catalog!

• A Must for all Broadcast & AV Professionals
• Exclusive & Custom Solutions
• The Best New Products
• Latest Industry Trends