-
Blackmagic Design
Item# BMD-SWTALGP18
The Blackmagic Design BMD-SWTALGPI8 GPI and Tally Interface provides 8 contact closure inputs and 8 contact closure outputs for connecting to ATEM switchers and Videohub routers. Tallies will be displayed when connected to an ATEM switcher to indicate their "on-air" status and you can even connect multiple interfaces together to increase the number of inputs and outputs. GPI and Tally Interface also works as a Videohub control panel without buttons and LEDs so you can make your...

-
metaSETZ
Item# DIGA-TLC-4LS
The TLC-4LS is designed to work with four input Livestream Studio switchers. It connects via USB to your switcher and to either the TL-2-C tally lights or RU-2 Relay units via Ethernet style cables up to 1000' long. The TLC-4LS supports both program and preview tally. Use the XLR intercom pass through port to inject your intercom signals into the tally cable and then connect your remote beltpacks to the tally light's 1/8" port with (proper adapters) and save a cable run. Features: Six tally outputs
Intercom...

-
AVMATRIX
Item# LIL-TS3019-4
2 Options AvailableTally lamps can recieve the tally signal transmitted from a video switcher with up to a 200m (line-of-sight) distance. The AVMATRIX TS3019-4 wireless tally system supports both 433Mhz wireless and RS-485 wired connection with long and stable signal transmission.
High Compatibility
The tally box supports various interfaces such as GPIO/USB/RS-232/RS-485, which can be compatible with Vmix video switchers. The interfaces can meet users' different needs and applications.
Intuitive...
Read More
-
metaSETZ
Item# DIGA-TL-2-C
The TL-2 v2.0 tally light is a streamlined and compact unit that can be mounted on your camera to provide both a bright tally for your on camera talent and status indicator lights for your camera operator. It connects to any of our tally controllers using standard Ethernet style cable and includes a new, more robust mounting system.
The TL-2-C is for use with any metaSETZ tally controller. Features: 3 Status LEDs: Red - Program, Green - Preview (TC300 or with TLC-6),Yellow - Effects (w/TLC-6...

-
Henry Engineering
Item# HE-SUPERLIGHT
The Henry Engineering SuperLight is a control interface for controlling LED and other low voltage studio tally lights. It is ideal for switching On The Air warning lights when a studio mic is "live". SuperLight can be controlled with virtually any broadcast console (or networked studio) and can directly power any 12 volt tally light that requires 500mA or less. A flasher circuit is included to flash the light when it is on. Two "Form C" relay contacts are also provided
for speaker muting...

-
Datavideo
Item# DV-TD-3
Tally Light LED Set
Set of 4 lights
Displays: Green (Cued) or Red (Live)
For use with ITC-100
Features: Tally Light LED Set
Set of 4 lights
Displays: Green (Cued) or Red (Live)
For use with ITC-100

-
metaSETZ
Item# DIGA-MS TLC-U-15
Compatible with any video switcher that has contact closure or open collector tally outputs. Available in four different input connector variants: DB9, DB15, DB25 and DB37. Internal configuration matrix so in most cases no custom cable is necessary. Supports both program and preview tally (depends on switcher) metaSETZ exclusive intercom pass through. Compatible with metaSETZ TL-2 tally lights. Includes DB Cable and USB power cube.
Partial Compatibility List:
DB15:...

-
metaSETZ
Item# DIGA-RU-2
Connect the TLC-8 Controller to CCUs that require a contact closure input for tally.
The RU-2 connects just like one of our tally lights but rather than LEDs has two contact closure outputs (on a 3.5mm jack).
The RU-2 includes a twelve inch RJ-45 cable to connect to the controller and a two and a half foot pigtail with a right angle 3.5mm connector at one end and bare tinned leads at the other. Simply add a connector that matches your CCU's tally port.

-
metaSETZ
Item# DIGA-TLC-4S
The TLC-4S is designed to work with four input HD TriCasters. It connects via USB to your switcher and to either the TL-2-C tally lights or RU-2 Relay units via Ethernet style cables up to 1000' long. The TLC-4S supports both program and preview tally and the six tally ports can be software assigned to any switcher input. Use the XLR intercom pass through port to inject your intercom signals into the tally cable and then connect your remote beltpacks to the tally light's 1/8" port with (proper adapters)...

-
metaSETZ
Item# DIGA-TLC-8D
The TLC-8d controller is an adapter box the connects to the TriCaster TCXD850's 15 pin tally port and interfaces to either model of our tally lights.
The '850's tally port supports a 'program' tally for the source selected on the program bus of the switcher. The TLC-8d translates this signal to illuminate the red camera operator tally and the 'talent' tally on the TL-2 tally light. The talent tallys can be globally disabled via a jumper in the TLC-8d.
For CCU users the TLC-8d has wet contact...

-
metaSETZ
Item# DIGA-TLC-8D-BS
The TLC-8d controller is an adapter box the connects to the TriCaster TCXD850's 15 pin tally port and interfaces to either model of our tally lights.
The '850's tally port supports a 'program' tally for the source selected on the program bus of the switcher. The TLC-8d translates this signal to illuminate the red camera operator tally and the 'talent' tally on the TL-2 tally light. The talent tallys can be globally disabled via a jumper in the TLC-8d.
For CCU users the TLC-8d has wet contact...

-
metaSETZ
Item# DIGA-TLC-8LS
The TLC-8LS is designed to work with eight input Livestream Studios. It connects via USB to your switcher and to either the TL-2-C tally lights or RU-2 Relay units via Ethernet style cables up to 1000' long. The TLC-8LS supports both program and preview tally. Use the XLR intercom pass through port to inject your intercom signals into the tally cable and then connect your remote beltpacks to the tally light's 1/8" port with (proper adapters) and save a cable run. Features: Eight tally outputs
Intercom...

-
metaSETZ
Item# DIGA-TLC-8S
The TLC-8S is designed to work with eight input HD TriCasters. It connects via USB to your switcher and to either the TL-2-C tally lights or RU-2 Relay units via Ethernet style cables up to 1000' long. The TLC-8S supports both program and preview tally and the eight tally ports can be software assigned to any switcher input. Use the XLR intercom pass through port to inject your intercom signals into the tally cable and then connect your remote beltpacks to the tally light's 1/8" port with (proper...

-
metaSETZ
Item# DIGA-TLC-U-25
Compatible with any video switcher that has contact closure or open collector tally outputs. Available in four different input connector variants: DB9, DB15, DB25 and DB37. Internal configuration matrix so in most cases no custom cable is necessary. Supports both program and preview tally (depends on switcher) metaSETZ exclusive intercom pass through. Compatible with metaSETZ TL-1, TL-XD and TL-2 tally lights. Includes DB Cable and USB power cube.
Preliminary Compatibility List:
DB25: Blackmagic...

-
metaSETZ
Item# DIGA-TLC-U-9
In the past the hard part of setting up a tally system for your switcher was interfacing the hardware. The second issue is if you don’t have cameras with built in tally lights and matching CCUs you were out of luck. metaSETZ has solved these problems with the TLC-U Universal Tally Controller and TL-2 Tally Lights.
The TLC-U is available with four different connector configurations to match almost any switcher’s tally port and has an internal configuration matrix so no custom cables...

-
SKAARHOJ
Item# ETHTALLYLINKV2X6
The SKAARHOJ ETH-TALLY-LINK-V2-X6 Tally System is a great add-on for your live video-production. The tally lights have two LEDs - one facing the camera operator and the big one facing the presenter. The operator LED have both program and preview tally while the presenter LED is just for program. The two switches on the tally light enables the operator to turn on/off the main LED and to dim the operator LED. The Tally Box System handles up to 8 tally lights, connecting either directly via...

-
Henry Engineering
Item# HE-MIKEALERT
The Henry Engineering Mike Alert makes installation of Yellowtec's "Mika" mic arms easy! It lets you connect the mic arms integrated dual-color Red/White tally lights to your console. Use Red for "On The Air" and White for "Ready" or a secondary indication.
MIKE ALERT is an interface device for controlling the dual-color tally indicators on popular "mic arms". The Mike Alert unit allows two mic arms' tally lights to be independently controlled, and provides...

-
AVMATRIX
Item# LIL-TS3019-RX
The AVMATRIX TS3019-RX tally lamp can recieve the tally signal transmitted from a video switcher with up to a 200m (line-of-sight) distance. There are both front and rear indicator lights on the tally lamps with 4-level brightness that can be adjusted. Users can also check signal strength and power statuses easily.
Hot Shoe Mounting
The tally lamp is designed with a 1/4 inch hotshoe hole. It is easy for installation and operation can be widely used in different application scenarios.
Dual...

-
SKAARHOJ
Item# SKA-ETHTLYLKV2X2
The ETH-TALLY-LINK-V2-X2 8-Channel Tally Box System with Two Tally Lights from SKAARHOJ allows you to take full control of your live video production. The system includes an 8-channel tally box and two tally lights. Each light features two LEDs, a green/red one facing the camera operator and a larger red one facing the presenter. The system offers both program and preview tally, and the lights can be connected one by one or in a daisy chain. An RJ45 port on both the box and the light connects...

-
SKAARHOJ
Item# SKA-TALLYLNKV2X4
The ETH-TALLY-LINK-V2-X4 8-Channel Tally Box System with Four Tally Lights from SKAARHOJ allows you to take full control of your live video production. The system includes an 8-channel tally box and four tally lights. Each light features two LEDs, a green/red one facing the camera operator and a larger red one facing the presenter. The system offers both program and preview tally, and the lights can be connected one by one or in a daisy chain. An RJ45 port on both the box and the light connects...

-
SKAARHOJ
Item# SKAETHTALLYLINKV
The 8-Channel Tally Box System with Five Tally Lights from SKAARHOJ allows you to take full control of your live video production. The system includes an 8-channel tally box and five tally lights. Each light features two LEDs, a green/red one facing the camera operator and a larger red one facing the presenter. The system offers both program and preview tally, and the lights can be connected one by one or in a daisy chain. An RJ45 port on both the box and the light connects the two.
Take...
