The FL-7 Call Signal Flasher connects to any Clear-Com or compatible intercom system, providing both a visual and an audible indication of a call signal on the intercom channel. The flasher emits a bright amber strobe light twice a second in response to a call. The unit also provides a ringing tone similar to an electronic telephone. The level of this tone is adjustable. A front-panel mode switch allows the user to choose among three operations: flasher only; ring only; or both flasher and ring. The FL-7 is especially useful in higher noise environments or in situations where the operator must leave the vicinity of the intercom station to do other tasks. Mounted in a rugged steel chassis, the compact flasher is ideal for portable use. Simply connect it using standard mic cable to the intercom line near the operator who requires signaling. The unit is powered by the intercom line, drawing only 80 mA during operation. Both male and female 3-pin XLR connectors are provided, allowing the the FL-7 to be connected anywhere on the intercom line. For permanent installations, two keyhole slots on the bottom of the case permit wall mounting.
THE CLEAR-COM CONCEPT
Clear-Com is a closed-circuit intercom system that consistently provides high-clarity communication in high-noise and low-noise environments. A basic system consists of a single- or multi-channel power supply or main station connected to various single- or multi-channel remote stations, such as beltpacks and loudspeaker stations. Clear-Com manufactures a wide variety of both portable and fixed-installation units. All are compatible with each other. Clear-Com intercom systems can also interface with other communication systems and devices.
Please Note! This item is just one component of a larger system. Please refer to the diagram for ideas and recommendations for your Clear-Com intercom system. Diagram shown is a recommendation for a small House Of Worship with simple partyline systems and wired beltpacks