Community D6 Two-Way 6.5-Inch High Output Ceiling Loudspeakers - Priced Per Pair


Primary Image

This item is no longer available.
Ask a Markertek Expert if you need assistance finding an appropriate substitute.

(800) 522-2025Email

Items similar to the CMTY-D6

CMTY-D6 - Overview

The powerful and versatile Distributed Design D6 provides high quality paging and musical performance suitable for retail environments, restaurants, resorts, and numerous other applications where the importance of sonic quality cannot be ignored. Particularly effective when supported by the D10SUB, a D6 system is capable of meeting demanding needs at a cost usually associated with much smaller loudspeakers.

Uniform voicing means that the D6 can be combined with both smaller and larger models from the Distributed Design Series without compromising consistency from zone to zone. The genuine coaxial design uses separate magnets for the LF and HF drivers for reduced distortion and industry-leading sensitivity, thereby permitting 3 dB to 6 dB greater output level while requiring half the amplification power of competing products.

The proprietary Tru-Phase waveguide and perfectly centered driver produce a consistently wide conical polar response up to 16 kHz. Community's patented Carbon Ring Cone Technology increases the effective cone area to further reduce distortion while reinforcing the cone for improved durability.

Exclusive Drop-Stop and Twist-Assist tabs allow single-handed placement to speed installation and reduce labor time. Drop-Stop's spring-loaded legs support the back can on the included tile rails and snap-on C-ring, so that the installer no longer needs to hold the can against the tile while tightening the clamps. Twist-Assist performs a similar function for the baffle assembly: when the loudspeaker back cans are pre-installed into a conduit system for termination at a later date, a simple twist of the baffle into the back can brings the Twist-Assist clips together, supporting the baffle assembly while the installer fastens the screws.

The front-face wattage selector switch enables quick adjustment of 70V/100V tap levels. A variety of installation accessories are available to accommodate different ceiling materials. The D6 face-only assembly and back can are also available for separate purchase.

  • Features:

    • High intelligibility with exceptional uniform coverage
    • Consistent, wide dispersion up to 16 kHz
    • True coaxial loudspeakers with HF compression drivers
    • Tru-Phase high-frequency waveguide
    • Patented Carbon Ring Cone Technology
    • Spring loaded Drop-Stop installation assistant tabs support the back can on the included rails and C-ring to simplify installation
    • Uniquely designed tile bridge support rails and snap-on C-ring support plates prevent sag
    • Twist-Assist loudspeaker face retainer tabs for fast and easy installation
    • 3/4-inch and 1-inch knock-outs on the sides of the back can
    • External loop-through Euroblock connectors
    • Rear cover with integrated cable clamp (strain relief) and optional conduit knockout
    • Selectable 8 ohm or 70V/100V operation
    • Back can and face-only packages available
    • Five year warranty
  • Specifications:

    • Transducers: LF - 1 x 6.5", HF - 1 x 1" exit compression driver.
    • Operating Range: 65 Hz - 22 kHz.
    • Sensitivity (1W/1m): 94 dB.
    • Power Handling: 100W continuous @ 8 ohms.
    • Continuous Max Output: 114 dB (120 dB Peak).
    • 70V/100V Autoformer: 60W, 30W, 15W, 7.5W (@70V only).
    • Nominal Beamwidth (H x V): 125° Conical.
    • Finish: Corrosion-resistant zinc plated steel can, black or white paintable ABS baffle, matched dual-layer powder-coated steel grille.
    • Dimensions (H x Dia): 6.8" x 11.2" (173 x 286 mm).
  • GTIN:


CMTY-D6 - Required Accessories

    California Residents:
    Cancer and Reproductive Harm -