FOR-A FT-ONE-SS4K High Speed Full 4K Super Slow Motion Camera (Lens NOT Included)

FT-ONE-SS4K - Overview

FT-ONE-SS4K - Overview

• Features:

  • Shoots up to 1000 frames per second (fps) in 4K
  • Simultaneous record and playback with internal memory
  • Independent live 4K (HD) output
  • Flicker correction (optional)
  • 12G-SDI/Quad link 3G-SDI outputs
  • Supports HDR/SDR and WCG
  • 4-wire, 2-wire, Clear-Comr supported
  • 24-axis color correction
  • Light weight design, can be shot using viewfnder
  • Can be used Canon's OLED viewfnder (optional)
   

• Specifications:

  • Camera Head: Image Sensor, Shutter, Other
  • Effective resolution: 4096 x 2160
  • Sensor size: 2/3 inch
  • Shutter mechanism: Global shutter
  • Quantization: 12-bit
  • Shutter speed: 1/frame rate to 1/50,000 sec.
  • Frame rate: 4K: Max. 1,000 fps
  • Lens mount: 2/3 inch B4 mount
  • Trigger method: START, CENTER, END, Arbitrary positions; Pre-roll function: Adjustable playback position
  • Trigger signal input: Remote control, GPI
    
    Video Settings
  • Gain Digital: 0 dB to 18 dB (0.1 dB step); Analog: 0 dB, 6 dB
  • White balance: PRESET: 3200K, 5600K, 6500K, 9300K; Semiautomatic correction
  • Pedestal: Black level set via R, G, B, Master
  • Color correction: Phase, R-G, R-B, G-R, G-B, B-R, and B-G; 24-axis color correction for Hue and Chroma
  • Gamma: γ1, γ0.45, γ0.50, HDTV, HDR (HLG2100)
  • Knee: Knee point and Knee slope setting
  • Enhancement: On/Off, horizontal (H), vertical (V)
    
    Video Outputs VF
  • Output formats: 1080/59.94i, 1080/50i, 75Ω, BNC x 2
  • Down-converted 4K video, or video supplied to RET1 or RET2 on the
  • base station (without embedded audio)
    
    Audio Inputs
  • Mic In: XLR 5 pin female x 1 (1 stereo pair), balance, high impedence
  • Input Level: -60 dBu/-50 dBu/-40 dBu
  • Phantom Power Supply: +48 V/OFF
  • Audio Outputs: Embedded 2 channels (1 stereo pair), 48 kHz, synchronous
    
    External Interfaces
  • Intercom Headset: XLR 4 pin female x 2; PRIV/LINE (producer line or engineer line)
  • GPI: D-sub 9 pin x 1; GPI IN 1 to 6, R TALLY OUT, G TALLY OUT
  • Iris Control: 12 pin female, HIROSE HR10A-10R-12S (71) connector x 1 Manual/Auto
  • Optical Camera Cable Port: Manufactured by LEMO or TAJIMI (factory setup)
    
    General Specifications
  • Temperature: 32° to 104°F (0° to 40°C)
  • Power:
    Supplied from the base station, via optical camera cable or an external power supply
    DC IN: XLR 4 pin male +12 V to +17 V
    DC OUT: XLR 4 pin female +12 V or DC IN voltage, Max. 50 W
  • Consumption: Max. 200 W
  • Dimensions (WxHxD): 6.77 x 8.50 x 16.42" (172 x 216 x 417mm) (excluding protrusions)
  • Weight: 15.43Lbs (7kg)
    
    Base Station Video outputs
  • 4K video (PLAY/LIVE):
    CH A 1 to 4/B 1 to 4: 12G-SDI, 3840 x 2160, 75O, BNC x 4, 2160/59.94P, 2160/50P
    3G-SDI mode, 2SI: Live video output (channel A); Live video or playback output (channel B)
    12G-SDI mode: Live video output x 4 (channel A); Live video or playback output x 4 (channel B)
    HD video: HD-SDI 1/2: 1080/59.94i, 1080/50i, 75O, BNC x 1; Downconverted 4K video
    
    Video inputs
  • Return RET 1/2: Input formats: 1080/59.94p, 1080/59.94i, 1080/50p, 1080/50i, 75Ω BNC x 2
  • Genlock BB: NTSC: 0.429 Vp-p/PAL: 0.45 Vp-p or tri-sync: 0.6 Vp-p, 75Ω, BNC x 1, loop-through
  • Genlock Mode: Internal or external sync (BB or Tri-sync)
    
    External Interfaces
  • Ethernet: 100BASE-TX/1000BASE-T. RJ-45 x 1 (for remote control unit and remote control panel connection)
  • Intercom inputs/outputs: Communication: 25-pin D-sub (female) x 1, one line each for the engineer and producer; 2- and 4-wire supported; Two program lines; R and G tally input
  • Head Set: 4-pin XLR (female) x 2 (for intercom connection)
  • Intercom IN1/IN2: 3-pin XLR (male) x 2 (for Clear-Comr intercom connection)
  • Optical Camera Cable Port: Manufactured by LEMO or TAJIMI (factory setup)
    
    Recording Section
  • Frame rate/Recording Time: See tables below.
  • Partitioning: 1 to 16 segments
    
    General specifications
  • Temperature: 32° to 104°F (0° to 40°)
  • Humidity: 30% to 85% (no condensation)
  • Power: 100 VAC to 240 VAC
  • Consumption: 350 W (can be supplied power to camera head)
  • Dimensions (WxHxD): (430 x 88 x 500mm) (excluding protrusions)
  • Weight: 36.37LBs (16.5kg)
    
    Others
  • Accessories Operation manual, AC cable
  • Options FT-ONE-LS-FC: Flicker Corrector
  • FT-1RUA/RUB: Remote Control Unit
  • FT-1RCPA: Remote Control Panel
   

• Item Includes:

  • 1x FT-ONE-SS4K Camera
  • 1x Compact 2RU Base Station
   

FT-ONE-SS4K - Required Accessories

FT-ONE-SS4K - Recommended Accessories

FT-ONE-SS4K - Attachments