Studio Technologies M362 Dante Listen Only Beltpack

ITEM #: STCH-362 MFG #: 362

Primary Image
  • Product Image Thumbnail 1 of 4
  • Product Image Thumbnail 2 of 4
  • Product Image Thumbnail 3 of 4
  • Product Image Thumbnail 4 of 4

This item is no longer available.
Ask a Markertek Expert if you need assistance finding an appropriate substitute.

(800) 522-2025Email

Items similar to the STCH-362

362 - Overview

The StudioTech's Model 362 Listen-Only Beltpack is a self-contained 2-channel user device that supports headphone monitoring of two audio channels associated with the Dante audio-over-Ethernet media networking technology. Each Model 362 is intended to be used by one user, providing them with the form factor, reliability, and features needed to be effective in a variety of applications. It's expected that most applications will use multiple Model 362 units to support the individual audio monitoring needs of a group of users.

  • Features:

    • Configurable audio channel routing
    • Dual level controls
    • Excellent audio quality
    • 1/4-inch and 3.5 mm output jacks
    • Power-over-Ethernet (PoE) powered
     
  • Specifications:

    • Network Audio Technology
    • Type: Dante audio-over-Ethernet
    • Bit Depth: up to 24
    • Sample Rate: 44.1, 48, 88.2 and 96 kHz
    • Number of Receiver (Input) Channels: 2
    • Dante Audio Flows: 2 receiver
    • Power Source: Power-over-Ethernet (PoE): class 1 (very low power, ≤3.84 watts)

      Network Interface
    • Type: twisted-pair Ethernet, Power-over-Ethernet (PoE) supported
    • Data Rate: 100 Mb/s (10 Mb/s and 1000 Mb/s "GigE" Ethernet not supported)

      Headphone Output
    • Type: Dual-channel
    • Compatibility: intended for connection to mono or stereo headsets or earpieces with nominal impedance of 50 ohms or greater
    • Maximum Output Voltage: 3.8 Vrms, 1 kHz, 150 ohm load
    • Frequency Response: 20 Hz to 20 kHz, -2 dB
    • Distortion (THD+N): <0.002%
    • Dynamic Range: >100 dB

      Connectors
    • Headphone Output: 1/4-inch and 3.5 mm 3-conductor jacks
    • Ethernet: Neutrik etherCON RJ45

      Dimensions (Overall)
    • 3.1 inches wide (7.9 cm)
    • 1.6 inches high (4.0 cm)
    • 4.0 inches deep (10.2 cm)
    • Weight: 0.5 pounds (0.2 kg)
     

362 - Required Accessories

    California Residents:
    WARNING:
    Cancer and Reproductive Harm - www.P65Warnings.ca.gov