Where to Buy Sescom | Audio Fiber Extenders, Hum Removers

Viewing Item(s):

Display:

Viewing Item(s):

Display

Show As

Sescom SES-X-FA2 Portable Battery Operated 2-Channel XLR Mic & Line Level Audio Over Single Fiber Extender Kit
Item# SES-X-FA2
Sescom's X-FA2 is a battery powered 2-Channel XLR line level audio over fiber optic extender system that's perfect for broadcast or corporate studios, field audio operations, OB vans, rental, theaters, stadiums and more! Sescom's new and improved X-FA2 design eliminates potential crosstalk issues. The Sescom X-FA2 supports optical transmission of balanced and unbalanced 24 Bit PCM - AES3 encoded line level audio signals. Transmission of audio signals supports short and long-distance requirements...
Our Price: $799.95
Availability: In Stock
Add to Wish List
Sescom SES-X-FA2LXBT01 Audio over Fiber EXTENDER- 2 CH Balanced XLR Bi-Directional Line Level Audio & ST Fiber Connect
Item# SES-X-FA2LXBT01
The cost effective, long-haul solution for sending bi-directional balanced line level audio over a single fiber cable! The Sescom X-FA2LXBT01 sends Balanced and Un-balanced 24 Bit PCM - AES3 encoded line level audio signals over multimode or single mode optical fiber at distances up to 1600 feet (multimode) or up to 12.4 miles (single mode). Sescom's new and improved X-FA2 designs eliminates potential crosstalk issues. X-FA2LXBT01 transceivers house two balanced 3-Pin XLR Female inputs and two...
Our Price: $1,063.95
Availability: In Stock
Add to Wish List
Sescom SC100XXJ Mic Cable Canare Star-Quad 3-Pin XLR Male to 3-Pin XLR Female Black - 100 Foot
Item# SC100XXJ
9 Lengths and 10 Colors Available
World's Finest Canare Star-Quad 3-Pin XLR Male to 3-Pin XLR Female Microphone Cables. Cables are built by Sescom with Canare's premier L-4E6S Star-Quad Microphone cable and the highest quality connectors from Neutrik, Connectronics and Switchcraft. Professional Mic/Audio Cables are designed to use with microphones but are also excellent for line-level signals (i.e. mixer to power amps). Special 4 conductor configuration plus high shield density reduce hum and noise to less than 10% of conventional...
Read More
Our Price: $64.95
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Sescom SES-AB-SWITCH Flip2 iPod/MP3 Player 3.5mm Stereo Audio A/B Switch
Item# SES-AB-SWITCH
The Sescom SES-AB-SWITCH Flip2 Aswitch solves the common issue of two source selection of 3.5mm stereo sources such as iPods, Computers, Android Smart Phones and iPhone Smartphones, iMacs, MP3 players, PC Sound Card outputs and more! Requires no power and can be used bidirectional. Saves wear and tear on constant equipment connects and disconnects. The SES-AB-SWITCH features a "center-off" rocker switch for disabling the audio source it's housed in a rugged aluminum cabinet. Rear mounted 3.5mm...
Our Price: $46.95
Availability: In Stock
Add to Wish List
Sescom DMX-5XM-CAT5 5-Pin XLR Male to RJ45 Adapter
Item# DMX-5XM-CAT5
XLRJ45 is an adapter to convert a DMX512 XLR connector to a RJ45 connector. The XLRJ45 adapter makes it possible to use any CAT-5 ethernet cable as a DMX512 cable. XLRJ45 is available in four versions, 3-pin male or female XLR or 5-pin male or female XLR. The different adapters can be mixed to make for example a 5-pin to 3-pin cable. XLRJ45 is very useful for making a DMX512 cable quickly and at a very low costs
Our Price: $10.95
Availability: In Stock
Add to Wish List
Sescom SES-X-FA4LXT01 Audio over Fiber EXTENDER: 4 CH Balanced XLR Line Level Audio & ST Fiber Connection
Item# SES-X-FA4LXT01
The cost effective, long-haul solution for sending 4-Channels of XLR balanced line level audio over a single fiber cable! The Sescom X-FA4LXT01 sends Balanced and Un-balanced 24 Bit PCM - AES3 encoded line level audio signals over multimode or single mode optical fiber at distances up to 1600 feet (multimode) or up to 12.4 miles (single mode). Sescom's new and improved X-FA4 design eliminates potential crosstalk issues. X-FA4LXT01 houses 3-Pin XLR connections. Professional bayonet style ST fibers...
Our Price: $1,063.95
Availability: In Stock
Add to Wish List
Sescom SES-X-FA2LRL01 2-Channel RCA Audio Over Fiber Tx/Rx Extender Set - LC Connectors
Item# SES-X-FA2LRL01
Sescom's X-FA2LRL01 is the complete plug-and-play RCA audio over fiber extender for sending 2-Channel unbalanced line-level audio up to 12.4 miles over a single LC fiber optic cable. The package includes SFP modules with LC connectors. The real beauty of an audio fiber line is its immunity to hum and RF interference when compared to its copper counterpart allowing the Sescom X-FA2LRL01 to deliver crystal clear audio each and every time. It offers a simple solution for sending a mixer's...
Our Price: $447.95
Availability: In Stock
Add to Wish List
Sescom SES-AUD-N-HDMI4K UHD 4K/2K HDMI Audio Inserter & HDMI Extender
Item# SES-AUD-N-HDMI4K
A natural problem solver, the Sescom SES-AUD-N-HDMI4K is a simple solution for embedding stereo analog or multi channel surround external audio into your HDMI signal stream via a 3.5mm mini or Toslink connection. The Sescom HDMI audio inserter finds a home in digital signage advertising applications as well as smaller multicamera live production shoots where a single audio feed makes more sense than individual camera audio. The unit supports HBR (high bit rate) Audio or Optical Toslink audio...
Our Price: $156.49
Availability: In Stock
Add to Wish List
Sescom SES-VUA-1RU Balanced Stereo Analog Audio Reference VU Meter Controlled Ballistic 40-LED per Channel Display
Item# SES-VUA-1RU
Need to check your levels but there's no more room in your Equipment Rack? Can't imagine squeezing one more unit into the Monitor Wall? Then you need to check out the Sescom SES-VUA-1RU Pro Audio VU Meter! This Controlled Ballistic 40-LED per Channel Display is super small and light, great for tight spaces. Ruggedly constructed in a powder coated steel enclosure with Phoenix connectors to provide secure and fast hard wiring of balanced stereo audio signals the SES-VUA-1RU takes up only 1 ru ,...
Our Price: $899.95
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Sescom DMX-5XF-CAT5 5-Pin XLR Female to RJ45 DMX Adapter
Item# DMX-5XF-CAT5
The DMX-5XF-CAT5 is an adapter to convert a DMX512 XLR connector to a RJ45 connector. The XLRJ45 adapter makes it possible to use any CAT-5 ethernet cable as a DMX512 cable. XLRJ45 is available in four versions, 3-pin male or female XLR or 5-pin male or female XLR. The different adapters can be mixed to make for example a 5-pin to 3-pin cable. XLRJ45 is very useful for making a DMX512 cable quickly and at a very low cost.
Our Price: $10.95
Availability: In Stock
Add to Wish List
Sescom DMX-3 Lighting Control Cable 5-Pin XLR Male to 5-Pin XLR Female Black - 3 Foot
Item# DMX-3
9 Lengths Available
These super flexible cables send control data to computerized DMX Lighting Fixtures for dimmer control, motion control and other DMX applications. Cables are terminated with 5-Pin black shell / silver pin Neutrik XLR connectors. Cables employ DMX-PRO lighting control cable designed specifically for the requirements of DMX512 control applications. The cable has two low-capacitance balanced pairs for control and auxiliary signals and exceeds the electrical performance specifications of DMX512 with...
Read More
Our Price: $41.95
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Sescom SES-ACON-1052 5-Pin XLR Female to 5-Position Fixed Screw Terminal Block Phoenix Plug PCB-Mounted Audio Adapter
Item# SES-ACON-1052
The solder free way to create XLR patch points quickly and efficiently. The Sescom ACON 1000 series connectors feature a chassis mount XLR front to a screw down terminal block rear. Terminal blocks are standard screw down connections ready to accept 30-16 AWG cable. The Sescom ACON-1052 has a 5-pin female XLR front to a five position fixed screw terminal block rear. Features: Quick and Easy Adapters for Audio Installations No Soldering Required Rugged Neutrik XLR Connector High Quality 5 Position...
Our Price: $24.49
Availability: In Stock
Add to Wish List
Sescom SES-CT1 Professional Ethernet & Audio Cable Tester
Item# SES-CT1
From XLR Mic cables, to RCA, to CAT5, to SPEAKON, the Sescom CT1 tests 'em all and then some! This compact and low cost cable tester is feature rich and an invaluable problem-solving tool for the live sound professional, studio recording engineer or systems integrator. The unit handles any combination of XLR, Phone, Phono, and speakON connectors, as well as DIN, Ethernet, and even multiple TRS cable sizes. The Sescom CT1 can test each contact on your cables via its selector knob with illuminated...
Our Price: $39.95
Availability: In Stock
Add to Wish List
Sescom NHA4F5M 4-Pin Female to 5-Pin Male Inline XLR Adapter Barrel
Item# NHA4F5M
Extend cables or adapt odd connections on the fly with the NHA4F5M 4-Pin Female to 5-Pin Male Inline XLR adapter barrel from Sescom. Designed for long term durability featuring Neutrik black and gold XLR connectors. Features: 4-Pin Female to 5-Pin Male Inline XLR Adapter These adapters Create Seamless Connection Between a Cable with 4-Pinÿor 5-Pin Cable Ends Allows for Convenient Headset and Communication Unit Adaptation in the Field Specifications: Neutrik Connectors: Capacitance between...
Our Price: $40.95
Availability: In Stock
Add to Wish List
Sescom 25MD-XC-M05 DB25 DA-88 Audio Cable Mogami 25-Pin D-Sub Male to Combo 4 XLR Female and 4 XLR Male - 5 Foot
Item# 25MD-XC-M05
4 Lengths Available
Cables are crafted with Mogami super flexible 3162 cable. All channels are numbered and individually shielded twisted pairs of #24 AWG gauge conductors. Standard fan out is 18 inches for common interface requirements. Designed for superior connectivity and strain relief, these assemblies feature the Neutrik XCC series digital AES/EBU XLR's and industry standard AMP DSub cable hood. Sescom 25-Pin D-Sub (Multipin) cable assemblies are wired to the Digi/Tascam D-Sub standard and are comparable to...
Read More
Our Price: $152.95
Availability: In Stock
Add to Wish List
Sescom IL-19-XFRMR Pro Audio Hum Eliminator Stand-Alone IL-19 Transformer with Wire Leads for Installers
Item# IL-19-XFRMR
Sescom IL-19 Transformer for Professional Audio Hum Elimination w/ Wires for Installers!The Only Product that Removes All Types of Hum in Live Sound & Pro-Audio Gear Can Now Be Purchased and Wired Directly To & From and Even Inside Your Gear! The Industry Standard - The Sescom IL-19 Transformer is the industry standard for instantly reducing audio hum problems in live sound & broadcast applications providing quick fix line isolation to stop Audio Hum Problems. Prepared with 6 inch stripped and...
Our Price: $38.95
Availability: In Stock
Add to Wish List
Sescom SES-AES-EBU-Y Impedance Matching AES/EBU Y Splitter Cable - 6 Inch
Item# SES-AES-EBU-Y
3 Lengths Available
When a simple solution is made simple to deploy, it is a winner on every job and that best describes our exclusive Digital Audio AES EBU XLR Y Splitter cable. This low cost cable is a state-of-the-art 1X2 digital audio splitter. Although it does not require external power as it employs our custom designed transformer to deliver performance with no apologies. This unit is fitted with high quality XLRs for I/O interface. Available in 6 Inch, 2 Foot and 6 Foot lengths. Cables work with 44.1, 48,...
Read More
Our Price: $76.49
Availability: In Stock
Add to Wish List
Sescom 25MA-XM-C05 DB25 DA-88 Audio Cable Canare Analog 25-Pin D-Sub Male to 8 XLR Male - 5 Foot
Item# 25MA-XM-C05
4 Lengths Available
Cables are crafted with quality Canare MR202-8AT cable. All channels are numbered and individually shielded twisted pairs of #25 AWG gauge conductors. Fan out is 18 inches for common interface requirements. Designed for superior connectivity and strain relief these use the Neutrik XX series XLR's and industry standard AMP DSub cable hood. Sescom 25-Pin D-Sub (Multipin) cable assemblies are wired to the Digi/Tascam D-Sub standard and are comparable to assemblies commonly referred to in the industry...
Read More
Our Price: $120.49
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Sescom NHA4M5F 4-Pin Male to 5-Pin Female Inline XLR Adapter Barrel
Item# NHA4M5F
Extend cables or adapt odd connections on the fly with the NHA4M5F 4-Pin Male to 5-Pin Female Inline XLR adapter barrel from Sescom. Designed for long term durability featuring Neutrik black and gold XLR connectors. Features: 4-Pin Male to 5-Pin Female Inline XLR Adapter These adapters Create Seamless Connection Between a Cable with 4-Pin or 5-Pin Cable Ends Allows for Convenient Headset and Communication Unit Adaptation in the Field Specifications: Neutrik Connectors: Capacitance between...
Our Price: $42.49
Availability: In Stock
Add to Wish List
Sescom SES-TRRS-AB Passive 3.5mm TRRS Headset A/B Switch with Ground Switching
Item# SES-TRRS-AB
The Sescom SES-TRRS-AB switch is a convenient solution for connecting a headset to gaming systems such as PS4, PS5, Xbox Series X, as well as iPhones, android smartphones, computers and tablets. This passive TRRS device makes it easy to switch between two devices to one headset, or to connect two TRRS headsets to one source and switch between the headsets. Conveniently place on or near a desktop or gaming console, or mount it anywhere with the included 3M Dual-Lock Velcro strips. Can be used with...
Our Price: $52.95
Availability: In Stock
Add to Wish List
Sescom IL-19 Pro Audio Hum Eliminator Inline with Isolation
Item# IL-19
You run the wires, make the XLR connections and power up your sound system only to find it's not music to your ears. One of the most dreaded sounds is prevalent across your system - speaker hum and noise. This isn't 1970 but an age old problem can still prevail in today's PA systems and that's why the Sescom IL-19 hum eliminator has stood the test of time. Its clever design isolates ground loop noise to remove that annoying buzz in your speakers. The Industry Standard - Designed as 3 products...
Our Price: $50.49
Availability: In Stock
Add to Wish List
Sescom SES-ACON-1051 5-Pin XLR Male to 5-Position Fixed Screw Terminal Block Phoenix Plug PCB-Mounted Audio Adapter
Item# SES-ACON-1051
The solder free way to create XLR patch points quickly and efficiently. The Sescom ACON 1000 series connectors feature a chassis mount XLR front to a screw down terminal block rear. Terminal blocks are standard screw down connections ready to accept 30-16 AWG cable. The Sescom ACON-1051 has a 5-pin male XLR front to a five position terminal block rear. Features: Quick and Easy Adapters for Audio Installations No Soldering Required Rugged Neutrik XLR Connector High Quality 5 Position Terminal...
Our Price: $21.95
Availability: In Stock
Add to Wish List
Sescom 8XLM-8XLF-10 Snake Cable 8-Channel XLR Male to XLR Female - 10 Foot
Item# 8XLM-8XLF-10
13 Lengths Available
Sescom Multichannel XLR male to XLR female audio snake cables are built in the USA with the highest quality components and are perfect for live events and general-purpose studio applications. Neutrik connectors feature chuck type strain relief for secure clamping and are color coded for easy identification. Made with Canare MR202 cable and Neutrik NC3MXX/FXX-BAG connectors, these long lasting and durable cables are super flexible for control room layout and interfacing between equipment racks,...
Read More
Our Price: $143.49
Availability: In Stock
Add to Wish List
Sescom NHA4M5M 4-Pin Male to 5-Pin Male Inline XLR Adapter Barrel
Item# NHA4M5M
Extend cables or adapt odd connections on the fly with the NHA4M5M 4-Pin Male to 5-Pin Male Inline XLR adapter from Sescom. Designed for long term durability featuring Neutrik black and gold XLR connectors. Features: 4-Pin Male to 5-Pin Male Inline XLR Adapter These adapters Create Seamless Connection Between a Cable with 4-Pinÿor 5-Pin Cable Ends Allows for Convenient Headset and Communication Unit Adaptation in the Field Specifications: Neutrik Connectors: Capacitance between Contacts:...
Our Price: $39.49
Availability: In Stock
Add to Wish List
Sescom DMX-TERM 5-Pin XLR Male DMX Termination Resistor - 120 Ohm
Item# DMX-TERM
Terminate your unused DMX connections to ensure proper function of your DMX controller! These Sescom exclusives provide peace of mind at an affordable price. Keep a few in your road case and never get an unwanted surprise at the club or on the set. Features: Manufactured with high-quality Neutrik 5-Pin Male XLRs Terminate the last device in DMX chain to prevent Signal Errors
Our Price: $16.95
Availability: In Stock
Add to Wish List
Sescom SC50XXJ/B Mic Cable Canare Star-Quad Black/Gold 3-Pin XLR Male to 3-Pin XLR Female Black - 50 Foot
Item# SC50XXJ/B
9 Lengths and 10 Colors Available
World's Finest Canare Star-Quad Black & Gold XLR Male to Female Microphone Cables. Cables are built by Sescom with Canare's premier L-4E6S Star-Quad Microphone cable and the highest quality connectors from Neutrik, Connectronics & Switchcraft. Professional Mic/Audio Cables are designed to use with microphones but are also excellent for line-level signals (i.e. mixer to power amps). Special 4 conductor configuration plus high shield density reduce hum and noise to less than 10% of conventional...
Read More
Our Price: $43.95
Availability: In Stock
Add to Wish List
Sescom FSL-1 Triple Sided Light Non-Flashing - ON AIR on Three Sides
Item# FSL-1
6 Options Available
Deliver the professional touch to your broadcast video, radio or audio recording studio with the Sescom FSL-1 On-Air light. This warning light keeps potential interruptions clear as you broadcast live on-air or over the internet. The Sescom FSL-1 triple sided light features On-Air on all sides. Perfect for video production studios, voiceover booths and podcasting, this light has been the trusted go to at NBC, CBS, ABC, ESPN, CNN and others for decades. The Sescom FSL-1 is made with an impact...
Read More
Our Price: $76.95
Availability: In Stock
Add to Wish List
Sescom NSP4-3 12AWG Neutrik NL4FXX-W-S 4-Pole speakON to 4-Pole speakON 4 Conductor Speaker Cable - 3 Foot
Item# NSP4-3
13 Lengths Available
Doesn't your live sound deserve better? It will get what it deserves and more with the NSP4 series 12 AWG 4-pole speaker cable by Sescom. Use the same speaker cable that has been proven the world over for its unmatched quality and pristine sound by touring and rigging professionals. The Sescom NSP4 is a 4-Pole to 4-Pole speaker cable utilizing the Neutrik NL4FXX-W-S speakON connector. The NL4FXX-W-S is the industry-standard for loudspeaker connections offering an extremely reliable locking...
Read More
Our Price: $30.95
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Sescom NHA4F4F 4-Pin Female to 4-Pin Female Inline XLR Adapter Barrel
Item# NHA4F4F
Extend cables or adapt odd connections on the fly with the NHA4F4F 4-Pin Female to 4-Pin Female Inline XLR adapter barrel from Sescom. Designed for long term durability featuring Neutrik black and gold XLR connectors. Features: 4-Pin Female to 4-Pin Female Inline XLR Adapter These adapters Create Seamless Connection Between a Cable with 4-Pin Cable Ends Allows for Convenient Headset and Communication Unit Adaptation in the Field Specifications: Neutrik Connectors: Capacitance between Contacts:...
Our Price: $41.49
Availability: In Stock
Add to Wish List
Sescom SES-XLR-RGAB Professional Grade Reverse-Gender Balanced Audio Passive A/B Switch 3-Pin XLR
Item# SES-XLR-RGAB
Save time and patching wear-and-tear on your equipment I/Os with the Sescom XLR-RGAB. This passive Balanced Stereo Audio Aswitch gives you an easy and economical way to select your XLR audio input channel between two outputs. It is perfect for things like sending your signal to an alternate mixer or sending audio to a separate distributed audio system. The Sescom XLR-RGAB is housed in a lightweight ABS plastic enclosure for use in the recording studio or on-stage applications. The unit offers...
Our Price: $64.95
Availability: In Stock
Add to Wish List
Sescom SES-LINE-DRYER Wet to Dry Line Neutrik XLR Adapter Barrel for Intercom Systems
Item# SES-LINE-DRYER
The Sescom XLR LINE DRYER offers a simple means to remove DC voltage from a wired intercom system feed in order to connect it with audio mixers. This wet to dry XLR adapter is built using a rugged housing design that easily couples inline between two cables. The LINE DRYER is a great solution to connect talent IFB to trucks and OB production unit audio while ensuring your equipment stays safe. Features: Line Drying Adapter Barrel Removes DC Voltage (Phantom Power) From Wired Intercom Systems...
Our Price: $38.95
Availability: In Stock
Add to Wish List
Sescom SES-AX1001 HDMI Audio Inserter & Extractor - Supports 4K 60HZ 4:4:4
Item# SES-AX1001
The Sescom SES-AX1001 is a simple solution for extracting or embedding stereo analog or multi-channel surround external audio to or from your HDMI signal. The Sescom HDMI audio inserter & extractor finds a home in lecture centers, digital signage advertising applications as well as smaller multicamera live production shoots where a single audio feed makes more sense than individual camera audio. The unit is HDCP 1.4 and 2.2 compliant and supports 4K UHD resolutions up to 4K@60Hz YUV 4:4:4 as well...
Our Price: $111.95
Availability: In Stock
Add to Wish List
Sescom NHA3F4M 3-Pin Female to 4-Pin Male Inline XLR Adapter Barrel
Item# NHA3F4M
Extend cables or adapt odd connections on the fly with the NHA3F4M 3-Pin female to 4-Pin male inline XLR adapter barrel. Designed for long term durability featuring Neutrik black and gold XLR connectors. Features: 3-Pin Female to 4-Pin Male Inline XLR Adapter These adapters Create Seamless Connection Between a Cable with 3-Pin or 4-Pin Cable Ends Allows for Convenient Headset and Communication Unit Adaptation in the Field Specifications: Neutrik Connectors: Capacitance between Contacts: (3-Pin)...
Our Price: $33.49
Availability: In Stock
Add to Wish List
Sescom SC50SZSJZ Audio Cable Canare Star-Quad 1/4 TRS Balanced Male to 1/4 TRS Balanced Female Black - 50 Foot
Item# SC50SZSJZ
9 Lengths and 10 Colors Available
World's Finest Canare Star-Quad 1/4-Inch TRS Male to 1/4-Inch TRS Female Audio Cables. Cables are built by Sescom with Canare's premier L-4E6S Star-Quad Microphone cable and the highest quality connectors from Neutrik, Canare, Connectronics & Switchcraft. Professional Mic/Audio Cables are designed to use with microphones but are also excellent for line-level signals (i.e. mixer to power amps). Special 4 conductor configuration plus high shield density reduce hum and noise to less than 10% of conventional...
Read More
Our Price: $49.49
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Sescom SES-MULTI-PAD 6-Position Variable 3-Pin XLR Inline Attenuator
Item# SES-MULTI-PAD
The Sescom SES-MULTI-PAD is the Ultimate Selectable Level Cut Balanced Audio Attenuator Pad that Plugs into Your Equipment I/O's or Inline Cables! The Sescom SES-MULTI-PAD attenuator reduces the power of your signal in selectable decibel increments of -5dB, -10dB, -20dB, -30dB, -40dB and -50dB without appreciably distorting signal waveform. It is housed in the same do-it-all enclosure as Sescom's flagship IL-19 and is ready to plug directly into other equipment's outputs or inputs with its built...
Our Price: $57.95
Availability: In Stock
Add to Wish List
Sescom IL-XLR-POSTS XLR Connector Male to Female w/ Posts for Banana Plugs or Bare Wire
Item# IL-XLR-POSTS
Every Audio Professional Needs These! No fancy explanations - just three screw down binding posts for banana plugs or any bare wire to XLR hook-up application. The IL-XLR-POSTS allows for fast termination in the studio or the field. Big color coded screw down binding posts mounted to a durable ABS plastic injection molded housing with BOTH a male and female XLR this TAPPER is ready to plug directly into ANYTHING! Accepts standard banana plugs for interface or quick access of your bare wire to...
Our Price: $53.95
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Sescom SES-EZ-MIX-02 Two-Channel Stereo Line Level Audio Mixer with Volume Control -Two 3.5mm Inputs & One 3.5mm Output
Item# SES-EZ-MIX-02
The Sescom SES-EZ-MIX-02 is a two-channel stereo audio mixer for combining two line level 3.5mm stereo sources to one 3.5mm stereo output via a compact and lightweight aluminum housing. The female 3.5mm inputs each feature a dedicated volume level control. Passive design requires no external power supply. Great for gamers, fitness classes, and users who need to run multiple audio sources into one input. Note: Not intended for use with headphones. Not compatible with phantom power. ...
Our Price: $60.95
Availability: In Stock
Add to Wish List
Sescom SES-XLR-AB-FS Balanced Audio Passive XLR A/B Footswitch with Toggle Switch for Disconnect
Item# SES-XLR-AB-FS
This is part of Sescom's series of new economical AB-Switches that are designed to last! The SES-XLR-AB-FS allows convenient foot-switching of two XLR inputs to a single common output. Excellent for use in Studios for PA or talkback switching and as it features hands-free switching. In addition, the unit features a disconnect toggle to keep unwanted audio from entering the live signal path, while maintaining a ground bus connection and only disconnecting the signal.These helpful AB switches can...
Our Price: $81.49
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Sescom SES-MKP-29 Balanced 1-Channel 3-Pin XLR Passive Audio Volume Control
Item# SES-MKP-29
Every Audio Professional Needs These! No fancy explanations - just a volume level knob with XLR audio input and output to control audio levels. Simple inline installation and you're ready to rock with this passive volume control. Includes 3M Dual-Lock type Super Velcro for endless mounting options in the studio or the field. Heavy duty construction with a housing made from strong black anodized aluminum. Good sized volume knob and quality connectors ensure easy control and solid connections. Quick...
Our Price: $42.49
Availability: In Stock
Add to Wish List
Sescom SES-MKP-33 Inline Stereo Headphone Level Control with 1/4 Inch TRS Connectors
Item# SES-MKP-33
Every Audio Professional Needs These! No fancy explanations - just a level knob and an input 1/4 connector on the left and an output 1/4 connector on the right ready to go anywhere at any time for any device to control the audio level. Fast installation can be done. Includes 3M Dual-Lock type Super Velcro for endless mounting options in the studio or the field. Heavy duty construction with a housing made from strong black anodized aluminum. Good sized volume knob and quality connectors ensure easy...
Our Price: $41.49
Availability: In Stock
Add to Wish List
Sescom AUD-TRS-BAL Stereo Unbalanced Audio to Balanced Converter 3.5mm TRS To Left & Right Male XLRs
Item# SES-AUD-TRS-BAL
The perfect tool for connecting smartphones, laptops and computer outputs to a front-of-house system or other professional sound setups is the Sescom AUD-TRS-BAL. It's a passive audio interface used to convert 3.5mm TRS line-level audio to left and right XLR balanced left/right outputs. Simply stated, it converts the output from laptops, MP3 players, CD players and more to interface with professional balanced 600 Ohm (relative) systems such as powered speakers, mixers and audio workstations. The...
Our Price: $89.49
Availability: In Stock
Add to Wish List
SESCOM BELDEN DMX 512 Lighting Control Cable 24 AWG 4 Conductor -Black- per foot
Item# SES-DMX1BK-FT
3 Lengths Available
Sescom DMX1BK DMX lighting control cable sets the standard for a low-capacitance data pair in long distance DMX applications. It will always deliver true RS-485 data transmission and it features handy color-coded conductors for ease of installation. True DMX lighting control cable is based on RS-485 data cable, a 120Ω impedance and a capacitance of 12.5 pF/ft. or less. Many lighting designers use 100Ω cables for DMX because those cables are smaller, cheaper and easier to find. The...
Read More
Our Price: $1.19
Availability: In Stock
Add to Wish List
Sescom NHA3F4F 3-Pin Female to 4-Pin Female Inline XLR Adapter Barrel
Item# NHA3F4F
Extend cables or adapt odd connections on the fly with the NHA3F4F 3-Pin female to 4-Pin female inline XLR adapter barrel. Designed for long term durability featuring Neutrik black and gold XLR connectors. Features: 3-Pin Female to 4-Pin Female Inline XLR Adapter These adapters Create Seamless Connection Between a Cable with 3-Pin or 4-Pin Cable Ends Allows for Convenient Headset and Communication Unit Adaptation in the Field Specifications: Neutrik Connectors: Capacitance between Contacts:...
Our Price: $34.95
Availability: In Stock
Add to Wish List
Sescom SES-A-V-SYNC Unbalanced RCA A/V Lip-Sync Corrector
Item# SES-A-V-SYNC
The SES-A-V-SYNC is a L/R In-Out audio-video synchronization corrector. Another way to describe it is it is a compact device that corrects audio delays between audio and video. When distributing video over long distances through multiple devices like distribution amplifiers and set top boxes there can sometimes be a noticeable video processing delay which results in audio being played before the video. This also happens when the audio from sources is sent to audio amplifiers over analog lines while...
Our Price: $99.95
Availability: In Stock
Add to Wish List
Sescom SES-AES-EBU-1 3-Pin XLR Female to 75 Ohm BNC Female AES/EBU Impedance Transformer
Item# SES-AES-EBU-1
The Sescom SES-AES-EBU-1 is an excellent impedance transformer at a reasonable cost for meeting the needs between analog to digital conversion. It also allows for longer cable runs via unbalanced coaxial lines rather than twisted pair cables that have greater attenuation at relevant frequencies. Perfect for medium haul cable runs. Features: 110 Ohm Female XLR to 75 Ohm AES-EBU in-line transformers BNC to 3-Pin XLR Receptacle (male & female versions) Provides an excellent impedance transformer...
Our Price: $49.95
Availability: In Stock
Add to Wish List
Sescom SES-RM-SPEAKERS1 Indoor-Outdoor Rack Mount Stereo Speaker System 1RU
Item# SES-RM-SPEAKERS1
The perfect audio monitoring solution for every rack, the Sescom RM-SPEAKERS1 is a slimline 1RU rackmount speaker at a cost-effective price! Each speaker is rated at 4 watt peak power with two full range drivers. The system provides a simple way to confidently monitor your audio while preserving valuable rack space. It is housed in a lightweight, black anodized aluminum cabinet. Features: Two Oblong Passive Speakers Per Rack Unit for Stereo Use Compact Audio Confidence and Reference Monitor Lightweight,...
Our Price: $145.95
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Sescom SC50MZMJZ Audio Cable Canare Star-Quad 3.5mm TRS Balanced Male to 3.5mm TRS Balanced Female Black - 50 Foot
Item# SC50MZMJZ
7 Lengths and 10 Colors Available
World's Finest Canare Star-Quad 3.5mm TRS Stereo Male to 3.5mm TRS Stereo Female Audio Cables. Cables are built by Sescom with Canare's premier L-4E6S Star-Quad Microphone cable and the highest quality connectors from Neutrik, Connectronics & Switchcraft. Professional Mic/Audio Cables are designed to use with microphones but are also excellent for line-level signals (i.e. mixer to power amps). Special 4 conductor configuration plus high shield density reduce hum and noise to less than 10% of conventional...
Read More
Our Price: $40.95
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Sescom SES-MKP-39 Balanced 2-Channel Independent 3-Pin XLR Passive Audio Volume Control
Item# SES-MKP-39
The Sescom MKP-39 is a great addition to any gig bag whenever you need a simple 2-channel balanced XLR volume control. No fancy explanations here - you just plug it inline with your cables and you have an easy audio level adjustment giving you complete sound control. The handy adjustment knobs have position indicators for precise levels with a simple twist. It's small enough to be conveniently mounted just about anywhere - hide it under a desk, on a podium or alongside a mixing console. Built to...
Our Price: $66.95
Availability: In Stock
Add to Wish List
Sescom IL-LPTT XLR Push-To-Talk Inline Mic Switch with Phantom/Live LED
Item# SES-IL-LPTT
Have a mic you love but would love it more if it had an on/off switch? The passive Sescom IL-LPTT inline XLR push-to-talk switch is a cost effective way to add push-to-talk on/off control to any mic signal. Perfect for presenters, performers, on-air talent or anyone who cannot control the sound board but need to mute and activate a mic. It also works well as a cough switch. This handheld device features a latching button to turn on communication, and with a second button press, mute...
Our Price: $62.49
Availability: In Stock
Add to Wish List
Sescom SES-AE1001 HDMI 4K@60Hz YUV 4:4:4 Audio Extractor with EDID Support
Item# SES-AE1001
The Sescom AE1001 is a low cost 4K HDMI 2.0 audio extractor allowing you to extract the digital HDMI audio signal from HDMI inputs and break it out to analog 2-Channel RCA stereo audio output or SPDIF 5.1 channel audio out. It supports video resolutions up to 4K@60Hz YCbCr 4:4:4 as well as PCM and Dolby DTS audio formats. The Sescom AE1001 is a great add-on tool for XBOX Series X when needing an HDMI audio extractor. Features: 3 Audio EDID Settings: Bypass/2.0 CH/5.1CH S/PDIF TOSLINK Interface HDCP...
Our Price: $81.49
Availability: In Stock
Add to Wish List
Sescom SES-DIPRO Studio-Quality High Fidelity Passive DI Box
Item# SES-DIPRO
Musicians and Sound Engineers once swore by those old bright blue DI boxes from Sescom. So by customer demand, Sescom brings back its famous DI Box enlisting our vast knowledge of transformers developed through countless prototypes actually tested in the real world. This is the simplest and best sound-by-design direct box for connecting a high-impedance, line level, unbalanced output signal to a low-impedance microphone level balanced input via XLR. Due to it's combo jack input and 3-way attenuation,...
Our Price: $153.95
Availability: In Stock
Add to Wish List
Sescom SES-DTAP-DC25 Blackmagic Cinema Camera Anton Bauer/IDX D-Tap to DC Plug - 18 Inch
Item# SES-DTAP-DC25
The Sescom D-Tap to DC plug cable provides the critical power link from your Anton Bauer or IDX D-Tap equipped battery to the Blackmagic Cinema Camera! A convenient way to provide extended recording times for your camera in field and on-locations shoots. This cable features Sescom's proprietary inline power management circuitry. 18 Inch Long.
Our Price: $53.49
Availability: In Stock
Add to Wish List
SES-INLINE-EMCF Inline 3-Pin XLR Male to Female Neutrik EMC RF Filter
Item# SES-INLINE-EMCF
Even the best starquad audio cables aren't immune to RF signal noise. What's more, you can never be certain about the quality of installation on stage boxes & patch panels at a venue. Be 100% sure with our inline filter designed around Neutrik's EMC XLR connectors.The EMC's integrated LC-filter rejects RF-interference & LF-noise while having no effect on your balanced audio signal. Use on inputs or outputs. Tech notes: INLINE-EMCF does not block phantom power.
Our Price: $36.95
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Sescom SES-IL-MICPRE Active Inline XLR Microphone Preamplifier with Power Switch & Adapter
Item# SES-IL-MICPRE
Add approximately 40dB of gain to your mic signal and convert it from mic to line level with the Sescom IL-MICPRE microphone preamp. The IL-MICPRE is a simple inline device that increases your mic-level signal to the nominal operating level required for a mixer or other sound equipment with only a line-level input available. The IL-MICPRE is housed in a road-ready enclosure with XLR in and out. Please Note: The Sescom IL-MICPRE includes a power supply and is Not For Use with Phantom Powered...
Our Price: $109.49
Availability: In Stock
Add to Wish List
Sescom L2-3XXJ Mic Cable Pro Stage Series 3-Pin XLR Female to 3-Pin XLR Male Black - 3 Foot
Item# L2-3XXJ
9 Lengths and 6 Colors Available
Sescom Pro Stage Series Female to Male XLR Cables Features: Hand Crafted in the U.S.A. with a Choice of 6 Colors using Professional Quality Canare L-2T2S cable and Neutrik connectors Lifetime Warranty Please call for Custom Configurations
Read More
Our Price: $19.95
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Sescom SES-3MIX 3-Channel Mic/Line Mixer with Independent Level Control
Item# SES-3MIX
When you need an affordable quick fix to add more inputs to your mixer, portable PA or other gear, the Sescom 3MIX provides a simple solution. This 3x1 passive mini-mixer is not only cost effective but extremely versatile, allowing you to work with mic level or line-level signals, balanced or unbalanced. The Sescom 3MIX features 3 space-saving Neutrik XLR female/ 1/4 Combo inputs. Each input channel has its own independent level control. The 3MIX features XLR and 1/4 outputs which can send audio...
Our Price: $99.95
Availability: In Stock
Add to Wish List
Sescom LOPRO-XLR-3 Low Profile XLR Cable - Mogami Star-Quad 3-Pin Male to Female - 3 Foot
Item# LOPRO-XLR-3
3 Lengths Available
New Professional High Quality Low Pro-File, Low-Impedance Star Quad Patch Cables from Our In-House Cable Shop! Designed for professional results, these super tough miniature star quad cables will provide superior shielding, frequency response and strength for longevity. Cables are made with Neutrik black and gold cable connectors and Belden mini star quad cable. Perfect for rack and patch applications where cable size, cable hang weight are considerations in crowded rack panels. These...
Read More
Our Price: $39.95
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Sescom SES-AES-EBU-2 BNC Female to 3-Pin XLR Male AES/EBU Impedance Transformer
Item# SES-AES-EBU-2
The Sescom SES-AES-EBU-1 is an excellent impedance transformer at a reasonable cost for meeting the needs between analog to digital conversion. It also allows for longer cable runs via unbalanced coaxial lines rather than twisted pair cables that have greater attenuation at relevant frequencies. Perfect for medium haul cable runs. Features: 75 Ohm BNC to 110 Ohm Male XLR AES-EBU in-line transformers BNC to 3-Pin XLR Receptacle (male & female versions) Provides an excellent impedance transformer...
Our Price: $48.95
Availability: In Stock
Add to Wish List
Sescom TT/XM-1 Patch Cable Bantam TT Male to 3-Pin XLR Male Patchadap - 1 Foot
Item# TT/XM-1
7 Lengths Available
"OFF-THE-SHELF" patch cable solutions for all your feed needs! Interface anything to your panel quickly and easily. Saves an unbelievable amount of time! Highest quality components are used. Order several of each type and be prepared for your next project. Adapter cable for connection of balanced outboard gear with XLR type outputs to console patchbay. Canare L4E5C cable with Neutrik Black NP3TT Bantam Plug to Neutrik NC3MX XLR Plug. Specifications: 4-Conductor, 23 Gauge Adapter Cable Connects...
Read More
Our Price: $19.49
Availability: In Stock
Add to Wish List
Sescom SES-MKP-35 Inline Stereo Headphone Level Control with 1/8 Inch (3.5mm) TRS Connectors
Item# SES-MKP-35
Every Audio Professional Needs These! No fancy explanations - just a level knob and a 3.5mm TRS connector input & output, ready to go anywhere at any time for any device to control your headphone audio level. Fast installation can be done. Includes 3M Dual-Lock type Super Velcro for endless mounting options in the studio or the field. Heavy duty construction with a housing made from strong black anodized aluminum. Good sized volume knob and quality connectors ensure easy control and solid connections....
Our Price: $42.49
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Sescom 25MA-25M-M05 DB25 DA-88 Audio Cable Mogami Analog 25-Pin D-Sub Male to 25-Pin D-Sub Male - 5 Foot
Item# 25MA-25M-M05
5 Lengths Available
DB25 male to DB25 male with 8 channels analog audio in or out. Cables are crafted with Mogami super flexible 2932 cable. All channels are individually shielded twisted pairs of #26 AWG gauge conductors, with #25 AWG drain. Cables are designed with Industry standard AMP DSub cable hoods for the best RF rejection. Wired Pin to Pin straight thru for analog connections. Sescom 25-Pin D-Sub (Multipin) cable assemblies are wired to the Digi/Tascam D-Sub standard and are comparable to assemblies commonly...
Read More
Our Price: $98.95
Availability: In Stock
Add to Wish List
Sescom FSL-9 Triple-Sided Light Non-Flashing ON AIR on Front STREAMING on Two Sides AC Hard-Wired
Item# FSL-9
Deliver the professional touch to your live streaming studio with the FSL-9 On-Air-Streaming light. This warning light keeps potential interruptions clear as you broadcast live over the internet. Perfect for home studios, voiceover and podcasting the Sescom FSL-9 triple sided light features On-Air on the front and Streaming on the right and left sides. Its impact resistant housing can be surface mounted over standard electrical junction boxes and is AC 110V operated. It includes Bright 5K cool white...
Our Price: $83.95
Availability: In Stock
Add to Wish List
Sescom DSL-OA-2-BR ON AIR Desktop Light with USB and Battery Power Options - Blackout Face- RGB Lights
Item# DSL-OA-2-BR
Keep unwanted interruptions out of your production studio with a DSL Series On-Air Light from Sescom. With both desktop and wall mounting options, this warning light delivers the flexibility to use it for traditional broadcast purposes or as a cool decoration for the video podcaster. Each unit in the Sescom DSL on-air light series is powered via 5V USB and illuminated with a low power consumption LED bulb. This makes it a great option for remote productions and on-the-road radio shows. The unit...
Our Price: $79.95
Availability: In Stock
Add to Wish List
Sescom SES-ACON-6001 22AWG Balanced Analog Audio Cable 3-Pin XLR Female to 3-Position Pluggable Phoenix Plug - 1 Foot
Item# SES-ACON-6001
Make the quick connection between your 3-pin phoenix jacks and standard XLR mics and snakes with the Sescom ACON 6000 series XLR to 3-pin pluggable phoenix block cables. Perfect for quick integration of snake cables to front of house mixers and installed mic mixers featuring 3-pin terminal block jacks. Also great as a mating cable between the Shure RKC800 and Shure SCM800. The Sescom ACON 6000 features stripped and tinned leads terminated into a 3-pin pluggable phoenix connector on one end and...
Our Price: $15.95
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Sescom SES-IPOD-AB iPod-Compatible 3.5mm TRS Stereo Audio MP3 FLAC WMA Player Bi-Directional A/B Switch
Item# SES-IPOD-AB
The Sescom SES-IPOD-AB switch solves the common issue of two source selection of 3.5mm stereo sources such as iPod®, MP3 players, PC Sound Card outputs and more! Requires no power and can be used bidirectionally. Saves wear and tear on constant equipment connects and disconnects. Features: Switch Between Two 3.5mm Stereo Sources Uses Include: Connecting Dual iPods® or MP3 Players to Your House System Switch Line Level Inputs to Amplifiers, Mixers or PCs Switch Line...
Our Price: $36.49
Availability: In Stock
Add to Wish List
Sescom NHA3M5F 3-Pin Male to 5-Pin Female Inline XLR Adapter Barrel
Item# NHA3M5F
Extend cables or adapt odd connections on the fly with the NHA3M5F 3-Pin male to 5-Pin male inline XLR adapter barrel. Designed for long term durability featuring Neutrik black and gold XLR connectors. Features: 3-Pin Male to 5-Pin Female Inline XLR Adapter These adapters Create Seamless Connection Between a Cable with 3-Pin or 5-Pin Cable Ends Allows for Convenient Headset and Communication Unit Adaptation in the Field Specifications: Neutrik Connectors: Capacitance between Contacts: (3-Pin)...
Our Price: $37.95
Availability: In Stock
Add to Wish List
Sescom NHA4M4M 4-Pin Male to 4-Pin Male Inline XLR Adapter Barrel
Item# NHA4M4M
Extend cables or adapt odd connections on the fly with the NHA4M4M 4-Pin Male to 4-Pin Male Inline XLR adapter from Sescom. Designed for long term durability featuring Neutrik black and gold XLR connectors. Features: 4-Pin Male to 4-Pin Male Inline XLR Adapter These adapters Create Seamless Connection Between a Cable with 4-Pin Cable Ends Allows for Convenient Headset and Communication Unit Adaptation in the Field Specifications: Neutrik Connectors: Capacitance between Contacts: ≤ 7...
Our Price: $37.95
Availability: In Stock
Add to Wish List
Sescom SES-IL-PPB 3-Pin XLR Male to 3-Pin XLR Female Inline Phantom Power Blocker
Item# SES-IL-PPB
The SES-IL-PPB removes harmful phantom power from energized microphone inputs when phantom power isn't required (Pins 2 and 3). The SES-IL-PPB protects expensive and sensitive ribbon mics, dynamic mics, direct boxes, splitters and other devices not compatible with phantom power. It features complete passive circuitry to keep your audio signals distortion & noise free. A perfect addition to any audio run bag. Features: Inline Audio Phantom Power Blocker Passive Circuitry Removes Phantom Power...
Our Price: $37.95
Availability: In Stock
Add to Wish List
Sescom IL-19-PRS-GLS Pro Audio Hum Eliminator Inline with Phase Switch and Total Ground Lift Switch
Item# IL-19-PRS-GLS
The Only Product that Removes All Types of Hum in Live Sound & Pro-Audio Gear is now available with a Phase Switch and Total Ground Lift Switch -In the same form factor! This amazing feature set gives the ability to troubleshoot and repair on the spot without even disconnecting the unit, letting your show go on uninterrupted! The IL-19-PRS-GLS is the only Bi-Directional XLR device with Phase and Ground Lift Switches -Designed to plug directly into your equipment's Inputs...
Our Price: $72.49
Availability: In Stock
Add to Wish List
Sescom SES-HUMX2 Professional 2-Channel Passive Hum Eliminator
Item# SES-HUMX2
Sescom has a legendary reputation for isolating and eliminating hum caused by ground loops. The Sescom HUMX2 is a simple inline 2 Channel audio hum eliminator that's completely passive making it an indispensable tool for the gig bag, touring rack, or recording studio. Each channel of the HUMX2 has smart jacks that accept either a 1/4" or XLR input with each employing our custom isolation transformers. Channel inputs can also be converted back and forth between balanced and unbalanced connections...
Our Price: $47.95
Availability: In Stock
Add to Wish List
Sescom SES-ON-THE-LEVEL RCA to XLR Audio Level Converter with Level Controls
Item# SES-ON-THE-LEVEL
The SES-ON-THE-LEVEL is a feature rich, bidirectional balanced to unbalanced audio level converter with level controls. The product is provided with XLRs for Balanced I/O and RCA for Unbalanced I/O. The SES-ON-THE-LEVEL also features a 3.5mm (1/8") stereo audio input that's compatible with iPod & similar MP3 players. Balanced line outputs (L/R RCA) are also provided to feed a stereo amplifier for real time monitoring. The SES-ON-THE-LEVEL has an output for monitoring and confirming either direction,...
Our Price: $135.49
Availability: In Stock
Add to Wish List
Sescom TA4F-MPS-1.5 Audio Cable Premium Quality 4-Pin Mini XLR Female to 3.5mm TRS Balanced Male - 1.5 Foot
Item# TA4F-MPS-1.5
4 Lengths Available
Sescom Premium Series Mini 4-Pin XLRF to 3.5mm balanced cable is built in our in-house cable shop to strict professional standards. Constructed with super tough West Penn 291 foil shielded microphone cable and high quality Switchcraft TA4FLX mini XLR and 35HDNN 3.5mm connectors this broadcast quality cable is available in various lengths for the perfect fit.
Read More
Our Price: $44.95
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Sescom 25MA-XM-M05 DB25 DA-88 Audio Cable Mogami Analog 25-Pin D-Sub Male to 8 XLR Male - 5 Foot
Item# 25MA-XM-M05
4 Lengths Available
DB25 male to 8 XLR male analog audio output cable. Cables are crafted with Mogami super flexible 2932 cable. All channels are numbered and individually shielded twisted pairs of #26AWG gauge conductors, with #25AWG drain. Standard fan out is 18 inches for common interface requirements. Designed for superior connectivity and strain relief these assemblies feature the Neutrik XX series XLR's and industry standard AMP DSub cable hood. Sescom 25-Pin D-Sub (Multipin) cable assemblies are wired to the...
Read More
Our Price: $130.49
Availability: In Stock
Add to Wish List
Sescom TT/XF-1 Patch Cable Bantam TT Male to 3-Pin XLR Female Patchadap - 1 Foot
Item# TT/XF-1
6 Lengths Available
"OFF-THE-SHELF" patch cable solutions for all your feed needs! Interface anything to your panel quickly and easily. Saves an unbelievable amount of time! Highest quality components are used. Order several of each type and be prepared for your next project. Adapter cable for connection of balanced outboard gear with XLR type outputs to console patchbay. Canare L4E5C cable with Neutrik Black NP3TT Bantam Plug to Neutrik NC3FX XLR Receptacle. Specifications: 4-Conductor, 23 Gauge Adapter Cable Connects...
Read More
Our Price: $19.95
Availability: In Stock
Add to Wish List
Sescom SES-LAPADAP-GL 3.5mm to 3-Pin XLR Laptop to Mic Level Adapter Interface with Ground Lift Switch & Level Control
Item# SES-LAPADAP-GL
Delivering a high quality approach to connecting 3.5mm audio output jacks to professional XLR connections is made simple with the Sescom SES-LAPADAP-GL interface. When a presenter comes strolling in with a laptop or smartphone, this makes it easy to patch them into a pro-audio system without skipping a beat. It's the perfect device for hotel conference rooms, school & university lecture halls and gymnasiums, or live sound management firms. Ground Lift & Volume Control A Ground Lift and...
Our Price: $62.95
Availability: In Stock
Add to Wish List
Sescom PROFI-2RCA-C3 Patching Audio Cable Professional 2 RCA Male to 2 RCA Male - 3 Foot
Item# PROFI-2RCA-C3
3 Lengths Available
Professional grade patch cords using the Neutrik Profi RCA connectors. The Neutrik Profi RCA's uses a sliding mechanical ground contact to make ground before the signal contact and breaks signal contact before ground. This specialized connector design prevents noise spikes and broken speaker cones when connecting and disconnecting line level studio signals. Assembled in our shop using Canare L-4E3-2P cable.
Read More
Our Price: $61.95
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Sescom SES-4XLRF-CAT 4 Channel Passive Balanced Audio Extender Snake over CAT 5/6/7 - RJ45 to 4 Female XLR Connectors
Item# SES-4XLRF-CAT
6 XLR Genders and 2 Form Factors Available
Save big on the costs of expensive XLR audio snakes and pair-down 4 cable channels into a single low profile run with the Sescom 4XLRF-CAT. This brilliantly simple solution allows you to convert 4 XLR channels to single RJ45 connection allowing balanced mic level, AES/EBU digital or DMX signals to be run over a single CAT5, CAT5e, CAT6 or CAT7 cable. Run only the channels you need and even take advantage of the Sescom 4XLRF-CAT versatility by mixing multiple signals types in the same setup....
Read More
Our Price: $106.95
Availability: In Stock
Add to Wish List
Sescom 25MD-25M-YTM05 DB25 DA-88 Digital Audio Cable Mogami 25-Pin D-Sub Male to Male Yamaha to Tascam Adapter - 5 Foot
Item# 25MD-25M-YTM05
5 Lengths Available
Connects Apogee, Mackie, Yamaha type AES 8 channel I/O to a Tascam or Digi machines. Cables are crafted with Mogami super flexible 3162 multicore 110ohm AES/EBU digital audio cable. All channels are individually shielded twisted pairs of #24 AWG gauge conductors. Sescom 25-Pin D-Sub (Multipin) cable assemblies are comparable to assemblies commonly referred to in the industry with terms such as DA88 snake, DB25 breakout, and DB25 snake. Features: DB25 Male to DB25 Male with 8 Channels Digital Audio...
Read More
Our Price: $106.49
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Sescom AUD-XLR-RCA 1-Channel Balanced XLR to Unbalanced RCA Audio Converter
Item# SES-AUD-XLR-RCA
Sescom SES-AUD-XLR-RCA is a single channel balanced to unbalanced prosumer audio converter. Housed in a robust anodized aluminum enclosure with Neutrik chassis mount XLR and a recessed Neutrik RCA that you can hide in your hand, this converter delivers incredible sound quality and requires no power. With a world famous Sescom audio transformer inside, the SES-AUD-XLR-RCA assures the high quality and reliability that make it a must have for any gear bag or audio tool box. Designed to interface...
Our Price: $52.49
Availability: In Stock
Add to Wish List
Sescom 25MA-XF-C05 DB25 DA-88 Audio Cable Canare Analog 25-Pin D-Sub Male to 8 XLR Female - 5 Foot
Item# 25MA-XF-C05
5 Lengths Available
Cables are crafted with quality Canare MR202-8AT cable. All channels are numbered and individually shielded twisted pairs of #25 AWG gauge conductors. Fan out is 18 inches for common interface requirements. Designed for superior connectivity and strain relief these use the Neutrik XX series XLR's and industry standard AMP DSub cable hood. Sescom 25-Pin D-Sub (Multipin) cable assemblies are wired to the Digi/Tascam D-Sub standard and are comparable to assemblies commonly referred to in the industry...
Read More
Our Price: $124.49
Availability: In Stock
Add to Wish List
Sescom SES-TR-153 Professional DSLR Mic Cable 3-Pin XLR Female to Right-Angle 3.5mm TRS Male - 10 Foot
Item# SES-TR-153
Sescom's exclusive mic cable design with on board electronics for Low Impedance to High Impedance matching. Allows Professional XLR microphones to be used with camcorders and DSLR cameras, like the Canon 7D, with a 3.5mm (1/8") Stereo Mini Microphone Input. Specially designed components built into the cable eliminate the 6-volt DC found on some camcorder mic input jacks -this eliminates hum too! The SES-TR-153 features a high quality female XLR with 10 feet of flexible cable connected to a right...
Our Price: $31.49
Availability: In Stock
Add to Wish List
Sescom IL-19-2S Pro Audio Hum Eliminator 2-Channel Inline with Isolation
Item# IL-19-2S
Designed as 3 products in-one, the Sescom® IL-19® is the industry standard for providing inline isolation and instantly troubleshooting audio hum in live sound & broadcast applications. Sescom's unique proprietary internal circuitry eliminates hum for the best possible sound in any environment. The Sescom IL-19-2S is a 2-Channel boxed version (see IL-19 for the inline single channel version) built in a black rugged anodized aluminum enclosure with premium Neutrik XLR connectors to ensure the...
Our Price: $93.95
Availability: In Stock
Add to Wish List
Sescom SES-MKP-27 Professional 3.5mm TRS Balanced Audio Volume Control Anytime for Any Line Level Device
Item# SES-MKP-27
Every Audio Professional Needs These! No fancy explanations - it's a 3.5mm stereo volume control housed in professional and rugged housing with a simple 3.5mm I/O ports. Pocket sized package is ready go anywhere at any time for any device to control the audio level. Fast installation can be done and even includes 3M Dual-Lock type Super Velcro for endless mounting options in the studio or the field. Heavy duty construction with a housing made from strong black anodized extruded aluminum. Good...
Our Price: $42.49
Availability: In Stock
Add to Wish List
Sescom SES-XLR-RGABC Professional Grade Balanced Audio Passive A/B/C Switch Reverse-Gender XLR Switcher
Item# SES-XLR-RGABC
Quickly and easily send a 3-pin balanced XLR audio input signal to one of three possible destination points with the Sescom XLR-RGABC audio switch. This cost effective A-B-C switch features all Neutrik XLR connectors with a single input and 3 outputs housed in a field- rugged box. A simple three position knob makes output selection a cinch and the unit even features a recessed mute switch to silence your signal at any time. The Sescom XLR-RGABC is a handy device when your audio system needs a...
Our Price: $88.95
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Sescom SES-3XLRF-CAT 3 Channel Passive Balanced Audio Extender Snake over CAT5/6/7 - RJ45 to 3 Female XLR Connectors
Item# SES-3XLRF-CAT
2 XLR Genders and 2 Form Factors Available
Save big on the costs of expensive XLR audio snakes and pair-down 3 cable channels into a single low profile run with the Sescom 3XLRF-CAT. This brilliantly simple solution allows you to convert 3 XLR channels to single RJ45 connection allowing balanced mic level, AES/EBU digital or DMX signals to be run over a single CAT5, CAT5e, CAT6 or CAT7 cable. Run only the channels you need and even take advantage of the Sescom 3XLRF-CAT versatility by mixing multiple signals types in the same setup....
Read More
Our Price: $88.49
Availability: In Stock
Add to Wish List
Sescom SES-ACON-6002 22AWG Balanced Analog Audio Cable 3-Pin XLR Male to 3-Position Pluggable Phoenix Plug - 1 Foot
Item# SES-ACON-6002
Make the quick connection between your 3-pin phoenix jacks and standard XLR mics and snakes with the Sescom ACON 6000 series XLR to 3-pin pluggable phoenix block cables. Perfect for quick integration of snake cables to front of house mixers and installed mic mixers featuring 3-pin terminal block jacks. Also great as a mating cable between the Shure RKC800 and Shure SCM800. The Sescom ACON 6000 features stripped and tinned leads terminated into a 3-pin pluggable phoenix connector on one end and...
Our Price: $17.49
Availability: In Stock
Add to Wish List
Sescom Wraith Professional Active Mic Booster +22dB XLR Inline Mic Preamp
Item# SES-WRAITH
Deliver warm and natural audio gain to low output dynamic and ribbon microphones with a simple inline mic preamp solution: The Sescom Wraith. It's the industry secret to getting a huge boost in gain for passive mics without the annoying noise and hiss associated when you drive the gain too high on your mixer. It provides a gain of 22dB to wake up your mic and get the most out of it. You'll be impressed at how the Wraith can even improve the sound of popular studio mics like the Shure...
Our Price: $109.95
Availability: In Stock
Add to Wish List
Sescom SES-GHOST Single Channel Inline Microphone Preamp for Dynamic and Ribbon Mics +37dB
Item# SES-GHOST
Breathe serious life into your dynamic or ribbon mic with the Sescom Ghost! This cost-effective inline preamp adds up to 37db of gain to your mic delivering tones and additional clarity you never imagined possible from such a simple tool. It's a must for the studio pro and the roadie toolbox. It's also indispensable for podcasters and presenters. The Sescom Ghost pulls phantom power from your board, but does not pass phantom power to the microphone, so there's no additional power supply necessary....
Our Price: $39.95
Availability: In Stock
Add to Wish List
Sescom SES-IC2P-S-003 6-Pin Switchcraft Layout XLR Male to Female for RS-702 & RS-602 Beltpacks Intercom Cable - 3 Foot
Item# SES-IC2P-S-003
10 Lengths Available
Connect your Clear-Com RS-602 and RS-702 beltpacks at a fraction of the cost with the Sescom IC-2P-Series 6-Pin XLR intercom cables. These cables are handcrafted in the USA with trusted name brand components including Canare MR202 multichannel snake cable paired with Neutrik 6-Pin XLR connectors. They are lightweight for less drag on the hips and guaranteed to deliver a pristine quality audio signal. Features: Intercom Cable for RS-702 & RS-602 Beltpacks Extremely Lightweight & Flexible Cable Overall...
Read More
Our Price: $51.49
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Sescom SC100MZMZ Audio Cable Canare Star-Quad 3.5mm TRS Balanced Male to 3.5mm TRS Balanced Male Black - 100 Foot
Item# SC100MZMZ
9 Lengths and 10 Colors Available
World's Finest Canare Star-Quad 3.5mm Mini TRS Stereo Male to 3.5mm Mini TRS Stereo Male Audio Cables. Cables are built by Sescom with Canare's premier L-4E6S Star-Quad Microphone cable and the highest quality connectors from Neutrik, Connectronics & Switchcraft. Professional Mic/Audio Cables are designed to use with microphones but are also excellent for line-level signals (i.e. mixer to power amps). Special 4 conductor configuration plus high shield density reduce hum and noise to less than...
Read More
Our Price: $76.49
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Sescom 2MRC-R3 HiFi Audio Cable Unbalanced Single Pair RCA - 3 Foot
Item# 2MRC-R3
10 Lengths Available
When all the consumer hype clears, there is one cable left... the MRC Media Room Connections Cable. Crafted from oxygen free Canare GS-6 Pro-audio cable & connectorized with high quality Neutrik connectors, these cables offer amazing performance & flexibility for the most demanding media room audio applications. Sold in pairs.
Read More
Our Price: $43.49
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Sescom 1800F-XMF-1 Digital Patch Cable Belden 1800F AES/EBU Female XLR to Male XLR High-Flex Black - 1 Foot
Item# 1800F-XMF-1
9 Lengths and 2 Colors Available
Designed to provide the latest in precision impedance and flexibility, these new digital audio interconnects will provide reliable performance with AES/EBU interfaces. Featuring Belden 1800F "Super Flexible" digital patch cable, these tough assemblies include the best features for crush resistance, French Braid shielding and high density insulation which further reduces capacitance and propagation delay, allowing error-free transmissions over extended distances. Supports all devices that require...
Read More
Our Price: $37.95
Availability: In Stock
Add to Wish List
Sescom SES-DAC1 Audio Converter-Digital Coax or TOSLINK to Stereo Analog L/R RCA
Item# SES-DAC1
For a simple, reliable way to convert your Toslink or S/PDIF audio to analog stereo audio, the Sescom SES-DAC1 audio converter is the answer. This digital audio converter accepts both Toslink fiber and RCA S/PDIF connections for easy conversion to RCA Left and Right Analog audio. Features: Digital Coax or TOSLINK to Stereo Analog Conversion Supports Uncompressed 2-Channel LPCM Stereo Digital Audio Input S/PDIF 24-bit Incoming Bit Stream LED Power Indicator Compact Metal Enclosure CE,...
Our Price: $25.49
Availability: In Stock
Add to Wish List
Sescom SES-MULTI-PAD-2 6-Position Variable 3-Pin XLR Inline Attenuator for High Levels
Item# SES-MULTI-PAD-2
The Sescom SES-MULTI-PAD-2 is the Ultimate Selectable Level Cut Balanced Audio Attenuator Pad for Your Loud Recordings that Plugs into Your Equipment I/O's or Inline Cables! The Sescom SES-MULTI-PAD-2 attenuator reduces the power of your signal in selectable decibel increments of -25dB, -35dB, -45dB, -55dB, -65dB and -75dB without appreciably distorting signal waveform. It is housed in the same do-it-all enclosure as Sescom's flagship IL-19 and is ready to plug directly into other equipment's...
Our Price: $71.49
Availability: In Stock
Add to Wish List
Sescom SC100SZSZ Audio Cable Canare Star-Quad 1/4 TRS Balanced Male to 1/4 TRS Balanced Male Black - 100 Foot
Item# SC100SZSZ
9 Lengths and 10 Colors Available
World's Finest Canare Star-Quad 1/4-Inch TRS Stereo Male to 1/4-Inch TRS Stereo Male Audio Cables. Cables are built by Sescom with Canare's premier L-4E6S Star-Quad Microphone cable and the highest quality connectors from Neutrik, Canare, Connectronics & Switchcraft. Professional Mic/Audio Cables are designed to use with microphones but are also excellent for line-level signals (i.e. mixer to power amps). Special 4 conductor configuration plus high shield density reduce hum and noise to less than...
Read More
Our Price: $77.95
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Sescom SES-IPOD-XLRM03 Audio Breakout Y-Cable 3.5mm TRS Stereo Male to Dual 3-Pin XLR Male - 3 Foot
Item# SES-IPOD-XLRM03
5 Lengths and 2 XLR Genders Available
High Performance Professional audio breakout cables built in our cable shop with premium Neutrik and Switchcraft connectors. Allows easy connection of your mobile device or audio player to the gear in your rack or house system. Features: Specifications:
Read More
Our Price: $45.95
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Sescom ICOMX4-MF-10 Intercom Extension Cable 4-Pin XLR Male to 4-Pin XLR Female - 10 Foot
Item# ICOMX4-MF-10
5 Lengths Available
Sescom Intercom Extension Cables Featuring Canare MR202-2AT Cable and 4 Pin XLR Neutrik Connectors. Assembled with the high standards and durability demanded by the industry. Built with Canare MR202 2 twisted pair mic cable and wired pin to pin. These cables are specifically designed to work with most intercom systems. Telex - Clearcom - Anchor - Motorola + many more! Please check with our customer service department to confirm/assess your needs. Custom lengths...
Read More
Our Price: $32.49
Availability: In Stock
Add to Wish List
Sescom CAMCORD-MIC 3-Pin XLR Female to Right Angle 3.5mm TRS Unbalanced Male Mic to DSLR Audio Input Cable - 1.5 Foot
Item# SES-CAMCORD-MIC
The Sescom CAMCORD-MIC is specially designed to allow use of an XLR microphone with cameras and other audio gear with an audio input adapter cable for cameras and recorders with unbalanced 3.5mm mini jack inputs. The microphone input signal is passed through Sescom's specially designed circuitry to the mic input on the camera for distortion free, superior quality sound. The cable has a lightweight design for reduced stress on your camera input but broadcast built to Sescom standards...
Our Price: $36.95
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Sescom DMX-TERM-F 5-Pin XLR Female DMX Termination Resistor - 120 Ohm
Item# DMX-TERM-F
These Sescom exclusives provide peace of mind at an affordable price. Keep a few in your road case and never get an unwanted surprise at the club or on the set. Features: Manufactured with high-quality Neutrik 5-Pin Female XLR connectors Terminate the last device in a DMX chain to prevent signal errors
Our Price: $19.95
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Sescom ICOMX4-MF-10C Intercom Extension Cable 4-Pin XLR Male to 4-Pin XLR Female - 2-10 Foot Coiled
Item# ICOMX4-MF-10C
Sescom Intercom Extension Cables Featuring 23AWG Cable and 4 Pin XLR Neutrik Connectors. Assembled with the high standards and durability demanded by the industry. Custom lengths and configurations are never a problem they are our specialty!
Our Price: $57.49
Availability: Typically Ships in 3-10 Business Days
Add to Wish List

Sescom manufactures audio accessories for pro and semi-pro applications. Their product line is inclusive but not limited to: in-line devices, direct boxes, mic splitters and combiners, mic-line drivers, mic splitting transformers, cable testers, and XLR binding posts. The IL-19 and IL-19-2 inline Pro Audio hum & noise eliminators are a necessity for any studio, production house or Audio Engineer. Sescom always strives to give you high quality products, and Markertek will make sure you get them, Fast!

Markertek is an authorized dealer for the entire Sescom line. If you don't see what you're looking for, contact us and we'll do our best to get it for you.

Sign In

Sescom

Narrow Products

By Category

By Price Range

Filter By