Inday

The HDDA-2 is a 2 output Component Video Distribution Amplifier that can split any component video signal without degradation. Each output has its own High-Current Cable Driver. Features: High current output IC's drive cables les rthan 300 feet easily. No interaction with other outputs. Will accept any analog input, Composite Video, YPbPr or RGB at any scan rate and give you 2 identical High Bandwidth (200MHz) outputs. All Connectors are Gold Plated RCA. All Component formats supported...

Toslink 4-Output Optical Distribution Amplifier/Repeater Features: Toslink Digital Audio Splitter Converts One Toslink input to Four isolated Toslink outputs. Each output has its own Fiber Optic Transmitter. NO signal degradation. NOT a "Reflective" splitter that attenuates the signal. 96/192kHz Digital Audio compatible (12.288Mb/s). ADAT compatible! Power Supply Included Made in Oregon,USA!

Switches multiple Toslink or Coax Digital Audio sources to one Output! Two simultaneous outputs, Toslink and Coax. IR Remote Controllable. Works with the RGB4X-R. SPDIF Digital Audio 4-Input to 1-Output Switcher. Accepts Toslink or Coax Inputs. Input is automatically converted and sent to both outputs. Small size, 2x6x4in. Does not feature RS-232 control.All connectors are Gold Plated RCA. Toslink connectors with Shutter openings. See DA4X-RS to add RS-232 control** Features: Works with...

4x1 S/PDIF Digital Audio Switcher w/IR Remote & RS232 Option & Cable

The HDDA-1 is a 1x4 Component DA which carries Pr(R), Y(G), Pb(B) on color coded RCA's. This wide band analog Distribution Amplifier is capable of buffering and splitting any nominal 1 to 2 Volt (peak to peak) signal that terminates into 75 Ohms. Perfect for outputting to multiple HDTV displays from your DVD Player or Digital Receiver. Specifications: Input: 3 Gold Plated RCA, 75 Ohm Terminated & Color Coded. -Nominal Signal: 1Vp-p, Maximum: 4 Vp-p Output: 12 Gold Plated RCA, 75 Ohm & Color Coded....

Feature Packed Remote Control HDTV Component Switcher at a Low Price! Too many Component Video Sources and not enough inputs? Here's your answer! Switches 480i, 480p, 720p and 1080i. "Very Clean!" Very Wideband (> 230Mhz). Will NOT degrade your Video Signal. Features: HDTV Analog (Y,PbPr or RGB) 4-Input to 1-Output Switcher. Accepts any analog component video type, progressive or interlaced at any scan rate. Combine HDTV Receiver, HDTV Cable and Progressive Scan DVD Players into ONE Monitor...

Feature Packed Remote Control HDTV Component Switcher at a Low Price! Too many Component Video Sources and not enough inputs? Here's your answer! Switches 480i, 480p, 720p and 1080i. "Very Clean!" Very Wideband (> 230Mhz). Will NOT degrade your Video Signal.

The Inday AV4X-R is a 4-Input to 1-Output, 3 channel switcher. Two channels for Stereo Analog Audio and the third channel for Video or Coax Digital Audio. The circuitry inside the AV4X-R uses only the best components for ZERO degradation of audio and video signals. The IC's used for each signal path are specifically designed for the type is signal being switched. The result is a very low noise/distortion and flat frequency response output for both Audio and Video. Typical applications...

The Inday AV4X-RS is a 4-Input to 1-Output, 3 channel switcher. Two channels for Stereo Analog Audio and the third channel for Video or Coax Digital Audio. The circuitry inside the AV4X-R uses only the best components for ZERO degradation of audio and video signals. The IC's used for each signal path are specifically designed for the type is signal being switched. The result is a very low noise/distortion and flat frequency response output for both Audio and Video. Typical applications...

The Remote Control has 10 buttons. Only 5 of which are active at one time. The unit comes programmed to respond to the left side column of buttons. You can program the unit to switch using the right side buttons, if desired. This facilitates using two AV4X-R's in a system and having independent control over both.