-
Item# PRCO-AV1B
The Pro Co TradeTools AV1B Audio-Visual Interface allows the line-level outputs of audio and video playback devices, etc., to be connected to microphone inputs of house or portable P.A. systems for programs in school auditoriums, lecture halls, civic meetings and corporate board rooms. The AV1B provides audio interfacing and isolation with wide response and low distortion.
Three different types of input connectors-1/4" (6.3mm) T/R/S phone, 2 RCA-type phono, and 3.5mm T/R/S mini jacks - simplify...
-
Item# PRCO-AV1A
The ProCo TradeTools AV1A Audio-Visual Interface allows the line-level outputs of audio and video playback devices, etc., to be connected to microphone inputs of house or portable P.A. systems for programs in school auditoriums, lecture halls, civic meetings and corporate board rooms. The AV1A provides audio interfacing and isolation with wide response and low distortion.
All inputs are parallel and resistively mixed to monaural. 1/4" 3-conductor phone jack, accepts signals from balanced...
-
Item# PRC-CDPM
Power Mute is an active Cough Drop, providing all the functions of the Short Stop and the Sign Off, also with a status indicator. Also, the Power Mute can be used in momentary-switch mode or in latching-switch mode, pre-selectable with switches found inside the unit's battery cover. When light is green, microphone is always "on"; when light is red, microphone is always "off".
-
Item# 9144PC
Transformer adapter for converting signals from Lo-Z (mic) to Hi-Z (instrument) level. TS/XLRF configuration. Features: Specifications:
-
Item# AV-1
For connection of film projectors, tape recorders and phonographs to standard Low-Z balanced microphone input of public address system. RCA, 1/4" (6.35mm) and mini-jack inputs; unbalanced 1/4" (6.35mm) line output; switches for high/low level attenuation 16 Ohm load, and ground lift; also male XLR-type balanced output. Uses DBT-1 transformer (20K/150 Ohms).
-
Item# CB-1
For connection of unbalanced musical instruments and line-level sources to Low-Z balanced microphone input for PA or recording. Not recommended for speaker level use. 1/4" (6.35mm) input (with parallel 1/4" (6.35mm) output); switch for ground lift; male XLR type balanced output. Uses CBT-1 transformer (20K/150 Ohms).
-
Item# DB-1
Professional quality, passive direct box for connection of unbalanced musical instruments, line level sources and guitar amplifier outputs to Low-Z balanced microphone input for PA or recording. 1/4" (6.35mm) input (with parallel 1/4" (6.35mm) output); switches for speaker/line-level attenuation; high cut filter and ground lift; male XLR type balanced output. Uses DBT-1 transformer (20K/150 Ohms).
-
Item# DB-2
The Pro Co TradeTools DB2 is a passive, two-channel (stereo) direct box that offers clean and reliable performance both on stage and in the studio environment. Like the Pro Co DB1 Direct Box, it can be used for nearly any instrument or signal source, from electric bass, keyboards and drum machines and submixers.
The DB2 preserves the "punch" and clarity of the sound that is often lost when mic'ing a speaker, while eliminating the leakage, distortion and coloration. The signal delivered to the...
Our Price: $222.50
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Item# DB-4A
4-channel professional quality passive direct box for connection of unbalanced musical instruments and line-level sources to low-Z balanced microphone inputs for PA or recording. Each channel features 1 front-panel and 2 rear-panel 1/4" (6.35mm) jacks for input or parallel output, switches for line-level attenuation and ground lift, and front-panel male XLR-type output. Uses Pro Co DBT-1 transformers (20k/150 ohm)
Our Price: $405.02
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Item# IFACE
The Pro Co iFace Portable Audio Player Interface is a roadworthy aluminumhoused device that allows simple and reliable connection of stereo -10dBVaudio devices such as MP3 players, Apple iPods, laptop computers and consumer-type CD and DVD players to the balanced microphone inputs ofprofessional audio mixing consoles.
The iFace provides both a 3.5 mm (1/8") and recessed left/right RCA inputs for easy connection with standard patch cable s and a stereo/mono switch to provide passive summing to...
-
Item# IT-1
For balancing and isolation of line-level outputs of mixers, equalizers, crossovers and other equipment. 1/4" (6.35mm) T/R/S and female XLR type input (with parallel 1/4" (6.35mm) and male XLR-type output); 1/4" (6.35mm) T/R/S and male XLR type transformer isolated outputs with ground lift switch. Uses built in LOT-1 transformer (600 Ohms 1:1).
-
Item# IT-4A
The Pro Co TradeTools IT4A Isolation Transformer Unit provides four high-quality 1:1 line-level output transformers for applications requiring the high degree of electrical isolation only transformers can provide. The primary applications for the IT4A are in sound reinforcement systems where it may be necessary to break ground loops between pieces of equipment connected with unbalanced lines. For instance, the IT4A can be used to float the unbalanced outputs of an active crossover unit that must...
Our Price: $394.09
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Item# ITX
Transformer adapter for isolating line level signals. Available in XLRF/XLRM, TS/XLRM, and TRS/XLRM configurations.
ITX is a compact custom-made audio is a compact custom-made audio isolation transformer providing a floating XLR-type output from an
unbalanced source in a convenient package. Female XLR-type input. Male XLR-type output. Usable for 600W 1:1.
-
Item# ITX-Q
Transformer adapter for isolating line level signals. Available in XLRF/XLRM, TS/XLRM, and TRS/XLRM configurations.
-
Item# LMX
Pro Co LMX is an adapter for converting mixer mic input to accept line level signals. TRSF/XLRM configuration.
Features: Keep these handy in your gig or run bag!
A complete line of transformers to solve those last second impedance & level matching problems
Utilizes the finest Neutrik XLR connectors - not cheap imported models. XLR Male to 1/4" female.
-
Item# MAX-10
Adapter for attenuating microphone signals. Available in 10, 20, and 30db versions. XLRF/XLRM configurations. Features: Specifications:
-
Item# MAX-20
Adapter for attenuating microphone signals. Available in 10, 20, and 30db versions. XLRF/XLRM configurations.
Features: Specifications:
-
Item# MAX-30
Adapter for attenuating microphone signals. Available in 10, 20, and 30db versions. XLRF/XLRM configurations. Features: Specifications:
-
Item# MC-2
The ProCo TradeTools MC2 Mic Combiner passively combines the signals from two low-impedance microphone (or similar sources) into a single output. It is a handy "band-aid" for situations where the number of microphones required exceeds the number of mixer channels available, but separate equalization and level control for every microphone is not required. In a musical or recording situation, the MC2 can combine mics from sources like dual bass drums, percussion, stereo guitar amps,...
-
Item# MS-2
For splitting signal from a low-Z microphone between 2 mixers. Female XLR type input; direct and isolated male XLR type outputs; isolated output has ground lift switch. Uses MBT-1 transformer (150 Ohms 1:1).
-
Item# MS-42A
For splitting the signal from a low-Z microphone between 2 mixers. 4 channels,each with female XLR-type input and 2 male XLR-type outputs (Direct and Isolated). Isolated outputs have ground lift switches. Uses Pro Co MBT-1 transformers (150 ohm 1:1).
Our Price: $351.60
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Item# MS-43A
For splitting the signal from a low-Z microphone between 3 mixers. 4 channels, each with female XLR-type input and 3 male XLR-type outputs (1 Direct and 2 Isolated). Isolated outputs have ground lift switches. Uses Pro Co MBT-2transformers (150 ohm 1:1:1).
Our Price: $472.39
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Item# MS-82
2 Types AvailableThe Pro Co Multiface MS-82 Eight-Channel Mic Splitter splits the signals from each of eight low-impedance microphones (or similar sources) into two outputs, enabling two microphone preamplifiers to be fed from one source. The primary application for the MS-82 is in large sound reinforcement systems, where the P.A. system microphones must also be fed to a stage monitor system, or a broadcast or remote recording mixer. In such complex systems grounding problems can cause both unacceptable noise...
Read More
Our Price: $759.28
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Item# MS3
For splitting signal from a low-Z microphone between 3 mixers. Female XLR type input; direct and 2 isolated male XLR type outputs; isolated outputs have ground lift switches. Uses MBT-2 transformer (150 Ohms 1:1:1).
-
Item# PCO-RAT2
This is the classic RAT tone. The standard that all other distortion devices are measured against. Heard on thousands of recordings, it has helped define the sound of the past three decade's most influential bands.
The beauty of the RAT 2 lies in its versatility. Used as a primary distortion, it excels at arena rock rhythm tones and soaring leads. Do you have a powerful amp with too much headroom for the gig? The RAT 2 nails that sweet spot where a tube amp goes from sparkly clean to warm overdrive....
