Narrow Results:

• 

  Pro Co Sound MS-43A Four Channel Three Way Mic Splitter

  For splitting the signal from a low-Z microphone between 3 mixers. 4 channels, each with female XLR-type input and 3 male XLR-type outputs (1 Direct and 2 Isolated). Isolated outputs have ground lift switches. Uses Pro Co MBT-2transformers (150 ohm 1:1:1).

  

  Read More

  Item #: MS-43A

  Availability: Direct Ship from manufacturer, contact us for availability

  Our Price: $413.07

  Add to Wishlist
• 

  Pro Co AV1B Audio Visual Passive Direct Box

  The Pro Co TradeTools AV1B Audio-Visual Interface allows the line-level outputs of audio and video playback devices, etc., to be connected to microphone inputs of house or portable P.A. systems for programs in school auditoriums, lecture halls, civic meetings and corporate board rooms. The AV1B provides audio interfacing and isolation with wide response and low distortion. Three different types of input connectors-1/4" (6.3mm) T/R/S phone, 2 RCA-type phono, and 3.5mm T/R/S mini jacks - simplify...

  

  Read More

  Item #: PRCO-AV1B

  Availability: More on the way, usually ships in 3-10 business days

  Our Price: $124.82

  Add to Wishlist
• 

  Pro Co Sound LMX InLine Barrel XLR Mic to 1/4In Line Level Adapter

  Pro Co LMX is an adapter for converting mixer mic input to accept line level signals. TRSF/XLRM configuration. Features: Keep these handy in your gig or run bag! A complete line of transformers to solve those last second impedance & level matching problems Utilizes the finest Neutrik XLR connectors - not cheap imported models. XLR Male to 1/4" female.

  

  Read More

  Item #: LMX

  Availability: More on the way, usually ships in 3-10 business days

  Our Price: $40.59

  Add to Wishlist
• 

  4 Channel Isolation Transformer

  The Pro Co TradeTools IT4A Isolation Transformer Unit provides four high-quality 1:1 line-level output transformers for applications requiring the high degree of electrical isolation only transformers can provide. The primary applications for the IT4A are in sound reinforcement systems where it may be necessary to break ground loops between pieces of equipment connected with unbalanced lines. For instance, the IT4A can be used to float the unbalanced outputs of an active crossover unit that must...

  

  Read More

  Item #: IT-4A

  Availability: Direct Ship from manufacturer, contact us for availability

  Our Price: $345.00

  Add to Wishlist
• 

  Pro Co Sound 9144PC HI-Z to LO-Z Transformer Adapter TS/XLRF

  Transformer adapter for converting signals from Lo-Z (mic) to Hi-Z (instrument) level. TS/XLRF configuration. Features: Specifications:

  

  Read More

  Item #: 9144PC

  Availability: More on the way, usually ships in 3-10 business days

  Our Price: $107.88

  Add to Wishlist
• 

  ProCo Sound AV1 Audio/Video High to Low Impedance Interface Box

  For connection of film projectors, tape recorders and phonographs to standard Low-Z balanced microphone input of public address system. RCA, 1/4" (6.35mm) and mini-jack inputs; unbalanced 1/4" (6.35mm) line output; switches for high/low level attenuation 16 Ohm load, and ground lift; also male XLR-type balanced output. Uses DBT-1 transformer (20K/150 Ohms).

  

  Read More

  Item #: AV-1

  Availability: More on the way, usually ships in 3-10 business days

  Our Price: $124.82

  Add to Wishlist
• 

  ProCo iFace Portable Audio Player Interface

  The Pro Co iFace Portable Audio Player Interface is a roadworthy aluminumhoused device that allows simple and reliable connection of stereo -10dBVaudio devices such as MP3 players, Apple iPods, laptop computers and consumer-type CD and DVD players to the balanced microphone inputs ofprofessional audio mixing consoles. The iFace provides both a 3.5 mm (1/8") and recessed left/right RCA inputs for easy connection with standard patch cable s and a stereo/mono switch to provide passive summing to...

  

  Read More

  Item #: IFACE

  Availability: In Stock

  Our Price: $188.79

  Add to Wishlist
• 

  Isolation Transformer

  For balancing and isolation of line-level outputs of mixers, equalizers, crossovers and other equipment. 1/4" (6.35mm) T/R/S and female XLR type input (with parallel 1/4" (6.35mm) and male XLR-type output); 1/4" (6.35mm) T/R/S and male XLR type transformer isolated outputs with ground lift switch. Uses built in LOT-1 transformer (600 Ohms 1:1).

  

  Read More

  Item #: IT-1

  Availability: More on the way, usually ships in 3-10 business days

  Our Price: $116.84

  Add to Wishlist
• 

  Pro Co Sound ITX Inline ISO Transformer XLRF-XLRM

  Transformer adapter for isolating line level signals. Available in XLRF/XLRM, TS/XLRM, and TRS/XLRM configurations. ITX is a compact custom-made audio is a compact custom-made audio isolation transformer providing a floating XLR-type output from an unbalanced source in a convenient package. Female XLR-type input. Male XLR-type output. Usable for 600W 1:1.

  

  Read More

  Item #: ITX

  Availability: More on the way, usually ships in 3-10 business days

  Our Price: $66.36

  Add to Wishlist
• 

  Pro Co Sound ITX-Q Inline ISO Tranformer TS/XLRM

  Transformer adapter for isolating line level signals. Available in XLRF/XLRM, TS/XLRM, and TRS/XLRM configurations.

  

  Read More

  Item #: ITX-Q

  Availability: More on the way, usually ships in 3-10 business days

  Our Price: $63.95

  Add to Wishlist
• 

  Pro Co Sound MAX10 InLine Pad Adapter XLRF/XLRM 10dB

  Adapter for attenuating microphone signals. Available in 10, 20, and 30db versions. XLRF/XLRM configurations. Features: Specifications:

  

  Read More

  Item #: MAX-10

  Availability: More on the way, usually ships in 3-10 business days

  Our Price: $33.73

  Add to Wishlist
• 

  Pro Co Sound MAX20 InLine Pad Adapter XLRF/XLRM 20dB

  Adapter for attenuating microphone signals. Available in 10, 20, and 30db versions. XLRF/XLRM configurations. Features: Specifications:

  

  Read More

  Item #: MAX-20

  Availability: More on the way, usually ships in 3-10 business days

  Our Price: $33.73

  Add to Wishlist
• 

  Pro Co Sound MAX30 InLine Pad Adapter XLRF/XLRM 30dB

  Adapter for attenuating microphone signals. Available in 10, 20, and 30db versions. XLRF/XLRM configurations. Features: Specifications:

  

  Read More

  Item #: MAX-30

  Availability: More on the way, usually ships in 3-10 business days

  Our Price: $33.73

  Add to Wishlist
• 

  Pro Co Sound MS-2 1 into 2 Microphone Splitter Box

  For splitting signal from a low-Z microphone between 2 mixers. Female XLR type input; direct and isolated male XLR type outputs; isolated output has ground lift switch. Uses MBT-1 transformer (150 Ohms 1:1).

  

  Read More

  Item #: MS-2

  Availability: More on the way, usually ships in 3-10 business days

  Our Price: $94.42

  Add to Wishlist
• 

  Pro Co Sound MS-42A Four Channel Microphone Splitter

  For splitting the signal from a low-Z microphone between 2 mixers. 4 channels,each with female XLR-type input and 2 male XLR-type outputs (Direct and Isolated). Isolated outputs have ground lift switches. Uses Pro Co MBT-1 transformers (150 ohm 1:1).

  

  Read More

  Item #: MS-42A

  Availability: Direct Ship from manufacturer, contact us for availability

  Our Price: $306.89

  Add to Wishlist
• 

  Pro Co MS-82 8-Channel Microphone Splitter

  The Pro Co Multiface MS-82 Eight-Channel Mic Splitter splits the signals from each of eight low-impedance microphones (or similar sources) into two outputs, enabling two microphone preamplifiers to be fed from one source. The primary application for the MS-82 is in large sound reinforcement systems, where the P.A. system microphones must also be fed to a stage monitor system, or a broadcast or remote recording mixer. In such complex systems grounding problems can cause both unacceptable noise...

  

  2 Types Available

  Item #: MS-82

  Availability: Direct Ship from manufacturer, contact us for availability

  Our Price: $664.61

  Add to Wishlist
• 

  Pro Co Sound MS3 3-Way Microphone Splitter Box

  For splitting signal from a low-Z microphone between 3 mixers. Female XLR type input; direct and 2 isolated male XLR type outputs; isolated outputs have ground lift switches. Uses MBT-2 transformer (150 Ohms 1:1:1).

  

  Read More

  Item #: MS3

  Availability: More on the way, usually ships in 3-10 business days

  Our Price: $112.08

  Add to Wishlist
• 

  Pro Co Switch Witch Stereo In 4 Stereo Out Monitor Switcher

  The Switch Witch is a simple, effective line level speaker switcher that allows the user to select up to four pairs of speakers from a single balanced stereo line level source. All ins and outs are balanced on XLR connectors.The Switch Witch is a must have in any studio enviroment! With the Switch Witch, you are able to choose up to four pairs of monitors from one balanced stereo line level source. You can compare between your selected speakers being able to accurately compare each source. The Witch...

  

  Read More

  Item #: SWITCHWITCH

  Availability: Direct Ship from manufacturer, contact us for availability

  Our Price: $282.99

  Add to Wishlist
• 

  ProCo CDPB Panic Button - Switches Mic Signal from FOH to Backstage

  The Pro Co Panic Button Microphone Aand Muting Switch is an active microphone signal routing device that offers clean reliable performance with any balanced or floating low-impedance (150 ohm nominal) microphone or signal source. The foot-operated pedal allows a singer or speaker to reroute the microphone signal from Output A to Output B. The Panic Button may also be set to operate as a momentary push-to-talk, momentary push-to-mute, or latching microphone muting switch. The Panic Button is ideally...

  

  Read More

  Item #: PRC-CDPB

  Availability: Direct Ship from manufacturer, contact us for availability

  Our Price: $180.98

  Add to Wishlist
• 

  ProCo CDPM Sound Power Mute - Cough Drop Series Active Selectable Muting Switch

  Power Mute is an active Cough Drop, providing all the functions of the Short Stop and the Sign Off, also with a status indicator. Also, the Power Mute can be used in momentary-switch mode or in latching-switch mode, pre-selectable with switches found inside the unit's battery cover. When light is green, microphone is always "on"; when light is red, microphone is always "off".

  

  Read More

  Item #: PRC-CDPM

  Availability: More on the way, usually ships in 3-10 business days

  Our Price: $129.95

  Add to Wishlist
• 

  Cough Drop Sign Off Passive Momentary Mic Muting Switch with Latching Switch

  The Pro Co Model CDSO "Sign Off" Latching Microphone Muting Switch is a simple microphone signal muting device that offers clean reliable performance with any balanced or floating low-impedance (150 ohm nominal) microphone or signal source. The Sign Off is ideally suited for use in broadcast, disc jockey, sports announcing, boardroom, and live entertainment applications when the need to temporarily mute a microphone output is required. To mute the microphone signal, the user simply depresses...

  

  Read More

  Item #: PRC-CDSO

  Availability: More on the way, usually ships in 3-10 business days

  Our Price: $99.51

  Add to Wishlist
• 

  ProCo CDSS Short Stop Passive Momentary Mic Muting Switch

  Short Stop represents a name change for the original Pro Co Cough Drop, a passive momentary microphone-muting switch. To operate, the users microphone cable is plugged into the Short Stop and the Short Stop is plugged into the sound system. If the entertainer has to cough or clear their throat, they step on the Short Stop's momentary switch pressing and holding down the switch, muting the microphones signal to the sound system for as long as necessary, preventing embarrassing sounds from reaching...

  

  Read More

  Item #: PRC-SS

  Availability: More on the way, usually ships in 3-10 business days

  Our Price: $88.04

  Add to Wishlist
• 

  ProCo Rat2 Distortion Pedal

  This is the classic RAT tone. The standard that all other distortion devices are measured against. Heard on thousands of recordings, it has helped define the sound of the past three decade's most influential bands. The beauty of the RAT 2 lies in its versatility. Used as a primary distortion, it excels at arena rock rhythm tones and soaring leads. Do you have a powerful amp with too much headroom for the gig? The RAT 2 nails that sweet spot where a tube amp goes from sparkly clean to warm overdrive....

  

  Read More

  Item #: PCO-RAT2

  Availability: More on the way, usually ships in 3-10 business days

  Our Price: $73.67

  Add to Wishlist
• 

  Pro Co CB-1 Passive Direct Box with Ground Lift Switch

  For connection of unbalanced musical instruments and line-level sources to Low-Z balanced microphone input for PA or recording. Not recommended for speaker level use. 1/4" (6.35mm) input (with parallel 1/4" (6.35mm) output); switch for ground lift; male XLR type balanced output. Uses CBT-1 transformer (20K/150 Ohms).

  

  Read More

  Item #: CB-1

  Availability: More on the way, usually ships in 3-10 business days

  Our Price: $65.61

  Add to Wishlist
• 

  Pro Co Sound DB1 Monoface Series Direct Box

  Professional quality, passive direct box for connection of unbalanced musical instruments, line level sources and guitar amplifier outputs to Low-Z balanced microphone input for PA or recording. 1/4" (6.35mm) input (with parallel 1/4" (6.35mm) output); switches for speaker/line-level attenuation; high cut filter and ground lift; male XLR type balanced output. Uses DBT-1 transformer (20K/150 Ohms).

  

  Read More

  Item #: DB-1

  Availability: More on the way, usually ships in 3-10 business days

  Our Price: $99.99

  Add to Wishlist

Newsletter Sign Up

Weekly email with exclusive deals, unique new products, how-to videos and so much more!

Download the Newest Catalog!

• A Must for all Broadcast & AV Professionals
• Exclusive & Custom Solutions
• The Best New Products
• Latest Industry Trends