-
Item# RLS-HR70
The Rolls HR70 is a digital display analog FM transmitter. The HR70 provides a fast and simple solution for setting up local FM broadcasts to your parking lot or wherever needed! Perfect for houses of worship, drive-up clinics and drive-in movie theaters you can broadcast your message while maintaining safe, social distancing. At its core, the Rolls HR70 is a digital FM transmitter. Your system output connects via the XLR or RCA inputs and the HR70 inserts that signal into a...
Our Price: $179.00
Availability: Extended Lead Time. Email, Chat or Call Us for more details.
Add to Wish List-
Item# RM-67
The RM67 is a single rack space mixer designed for the install/contractor market. The unit mixes three balanced microphones with four stereo sources to mono or stereo balanced outputs.
The XLR Microphone Inputs have Mic/Line level switches, a send/return Insert jack, and individually switchable +12 VDC phantom power. Priority talkover, with variable Duck Sensitivity is available on one microphone for paging, and on one Source input for use on a jukebox. telephone system, etc.
Each Microphone...
Our Price: $220.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Item# MS111
The Rolls MS111 is a general purpose muting switch for microphones. The MS111 will pass phantom power, with no popping on the outputs. It is configurable to be Push to Mute or release to Mute by a second switch accessed on the side of the unit.
The MS111 can have the mute switch configured to be Momentary (see manual), the switch is set to latching from the factory. The MS111 is only compatible with balanced signals.
To switch a microphone signal on or off connect the balanced...
-
Item# RA235
The Rolls RA235 is a virtually indestructible single rack space amplifier intended for musicians and studio owners alike. The unit is ideal for home studio applications or wherever a clean, efficient, medium wattage amp is required. The front panel acts as heat distribution, there is no fan to induce noise.
Features: 35 Watts per channel of clean amplification
1/4" and RCA inputs
Convenient spring-loaded output terminals
Front panel heat sinking for proper venting
Level controls...
Our Price: $225.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Item# RM64
The new ROLLS RM64 Four Zone Mixer combines two paging microphones with up to four line level source inputs. Each input is switch selected to output to any combination of four zone outputs. The outputs are all balanced XLR connectors, and a 1/4" Remote Volume jack provides each zone with the means for external volume control.
The Microphone inputs feature automatic ducking for easy paging.
The RM64 is the ideal solution for banquet rooms, offices, restaurant/night clubs, etc.
Features: Two...
Our Price: $200.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Item# RLS-RM169
The ROLLS RM169 is a six channel Professional audio mixer with Bluetooth input. Two microphone inputs, and four stereo line RCA inputs, the RM169 is ideal for any installation where space is a consideration, without compromising audio quality. The Bluetooth input has extended range and exceptional audio quality. RCA and XLR balanced outputs jacks make the RM169 perfect for any application.
Specifications: Input Impedance:
Mic: 600 Ohms XLR balanced
Source:...
-
Item# RLS-PM50SE
The Rolls PM50se mixes a stereo or mono line-level Monitor signal with a microphone or line level XLR signal to a set of headphones. It has a monitor level control, mic/XLR level control, mic/line pass through XLR jack, two headphone output jacks, and a stereo or mono TRS or TS 1/4" monitor input jack.
If you're looking to make the switch from floor wedges to in-ear monitors, the Made in the USA Rolls PM50se is a cost-effective wired solution to get you there. The reduced stage noise...
-
Item# RLS-RA63B
The Rolls RA63b is an eight channel mono, or four channel stereo distribution amplifier designed for the contractor / install market. The outputs are designed to drive high-level balanced lines in a sound distribution system. The screw terminals on the rear panel are for input and output, and each output may power more than one line.
Features: Mono or Stereo Operation - mono input to eight outputs, or stereo inputs to four stereo outputs.
+20 dB Gain switch.
Screw Terminal inputs...
Our Price: $210.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Item# RA163
The Rolls RA163 is an eight channel distribution amp. It has independent volume attenuation for each channel, and 1X8(mono) or 2X4(stereo) compatibility. Balanced XLR jacks for all inputs and outputs. The RA163 also has volume knobs on the front panel and access to the stereo/mono switch.
The chassis is made of powder coated steel and uses an IEC 120V power cord, no wall wort adapter with this professional grade distribution amp. Designed for installations where you need to send...
Our Price: $150.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Item# RLS-HRD342
The Rolls HRD342 is intended for low cost, simple, time alignment of speakers in larger rooms or outdoors. The delay dial is shown in mili-seconds to make setup easy. The 32 to 360 ms shown on the dial will correlate to about the same in feet (32 ms = 32 ft). The Rolls HRD342 is inserted between the main console output and the amplifiers supplying the delayed speaker signal.
Features: Balanced XLR input and output
Level control to make up or add gain
Mounting designed to fit Rolls RMS270 rack...
Our Price: $149.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Item# MX54S
The Rolls MX54s Pro-Mix Plus mixes three microphones into two transformer balanced outputs. It has three XLR inputs, each with individually switchable phantom power, and Low Cut switches, a Level control, and a Pan control. As mentioned, it has two transformer balanced, XLR outputs. A 1/4 inch Aux/Headphone output has been provided along with a Clip indicator, Power indicator, and Power switch. The unit is also powered by two 9-Volt alkaline batteries.
Features: Mixes three microphones...
Our Price: $130.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Item# RA53B
The Rolls RA53b is a high powered headphone amplifier with five 1/4" and 1/8" (3.5mm) headphone and earphone outs. Two RA53b units may be linked together and mounted side-by-side in a universal rack tray for a total of 10 outputs. Features: 1/4" TRS Headphone Outputs with Level Control.
Lots of Gain.
1/4" and RCA Right and Left Inputs.
Inserts on Two Channels.
1/4" TRS Stereo Input, 1/4" Mono Input.
Link input/output for connecting two units together Specifications: Maximum...
Our Price: $115.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Item# MB-15B
The Rolls MB15 ProMatch converts consumer level stereo RCA signals to balanced XLR professional line level, and back. One side of the unit, labeled 1, has two XLR inputs and stereo RCA outputs. The other side labeled 2, has stereo RCA inputs and two XLR outputs. Each side has stereo level controls, and an LED indicates that power is applied to the unit. An additional benefit of the MB15 is that it will act as a balanced XLR line level control. By adding a stereo pair jumper between...
-
Item# RLS-DA134
Designed for high end RCA audio distribution the Rolls DA134 is a four channel distribution amplifier. RCA and 1/8” inputs that can be switched from mono or stereo. The DA134 will distribute a mono signal to eight outputs, or a stereo signal to four stereo outputs. The outputs are designed to drive line level signals. The DA134 is the perfect distribution amp anywhere high quality sound distribution is required.
Features: Expands the output of a stereo device to multiple outputs
Can...
-
Item# RLS-SS412
The SS412 source selector is a completely passive design with absolutely nothing added to your audio signal path. That means no power required, no electronics used and no distortion will ever be added. The chassis is made from .090" steel, meaning it is 3 times thicker than most chassis. Four pairs of RCA inputs allow for connection to all your sources, and one pair of RCA jacks to go to your amplifier. Connection of the SS412 is easy. The rear panel 1-4 RCA's connect your input...
Our Price: $99.00
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# RLS-DB226
The Rolls DB226 is a small adapter with an all metal chassis, designed to convert a stereo line level signal to a balanced mono output. The DB226 can also convert a balanced mono input to a mono RCA output. DIN rail bracket also avaliable.
Features: Plugable screw terminal for the balanced side
RCA input or output
Small compact design
Made in USA
Specifications: 40 - 20K Hz response
+4dB max level
Our Price: $69.00
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# DB14B
The Rolls DB14b is a special purpose direct box for applications where a stereo source signal can be separated, and individual volume controls used for each track such as an AV presentation from a laptop computer, or a rehearsing choir to a music track. It has stereo RCA and 1/8" inputs, 2 volume controls, RCA and XLR outputs, and uses no power.
Features: Splits Stereo RCA and stereo 1/8" (3.5mm) signals
Individual Right and Left level controls
Transformer balanced XLR mono...
Our Price: $49.00
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# HE18
The Rolls HE18 is a two channel audio hum and buzz remover. Everyone knows how annoying it is to have 60 cycle hum in your sound. Now you can eliminate virtually all ground hum and buzz by simply inserting the HE18 into the audio path. Plus, the unit will convert an unbalanced signal into a balanced signal, and vice-versa. This greatly improves overall noise performance.
Features: Eliminates ground loop hum and buzz
Leaves signal grounds connected
Passive, the unit requires...
Our Price: $39.00
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# BC17
The Rolls BC17 belt clip for the PM series to attach to clothing.
Works with the PM50s PM50sOB and PM350
Features: Spring steel with mounting screws
Our Price: $5.00
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# CL-151
The Rolls CL151 GLC is a unique dynamics processor with the added benefit of a microphone preamp. The unit features smooth, soft-knee compression and limiting, and noise gating for quiet operation. Gating is indicated by a front panel LED, and gain reduction is indicated via a 5-LED ladder.
The plug connected to the Tip is the "Send" which will connect to the Input of the signal processing device, and the Ring is the "Return" which connects directly to the detector (compression...
Our Price: $99.00
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# DB24
Introducing the Rolls DB24 Stereo Direct Interface. This unit is a two channel isolation device designed to connect high impedance devices to low impedance. The unit is completely passive, and utilizes Rolls proprietary audio transformers for superior sound. A heavy duty steel chassis was chosen to provide maximum reliability when used in demanding live sound reinforcement applications.
A variety of inputs are provided including stereo and mono 1/4", stereo RCA, and stereo 1/8"...
Our Price: $69.00
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# DU30B
The Rolls DU30b is a microphone preamp and background music preamp. When an announcement is made into the microphone, the music is automatically "ducked" under the announcement. Then the music is brought back to it's previous level.
Features: Automatically ducks music under announcements
Perfect for restaurants and small clubs
Clean, Quiet Mic Preamp
Female XLR jack for connection to a dynamic or condenser paging microphone.
Jumper for engaging the +12 volt phantom power to...
Our Price: $80.00
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# HA-243
The Rolls HA243 is a high powered headphone amplifier with four 1/4" and 1/8" (3.5mm) headphone outs. The HA243 features an A-B switch for each channel to monitor either the A or B input with the flick of a switch!
Please note! Plugging a mono 1/4" or 1/8" TS plug into the Headphone Outputs on the front or rear of the HA243 will cause permanent damage to the unit because one side would be shorted to ground. Never plug a mono plug into ever plug a mono plug into...
Our Price: $130.00
Availability: Extended Lead Time. Email, Chat or Call Us for more details.
Add to Wish List-
Item# HA-43PRO
The Rolls HA43 Pro is a full frequency response four channel headphone monitoring device designed for the recording studio, or other professional applications like listening rooms and monitoring stations. Each output boasts a whopping 20 dB of clean channel gain.
Features: Stereo 1/4" and Dual RCA Inputs.
Slider Volume controls.
AC adapter included.
Full frequency response.
Lots of output level.... it's loud!
HA43 Pro Specifications: Input Impedance: 100K Ohms unbalanced
Size:...
Our Price: $50.00
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# HR155
The Rolls HR155 is a compact rack mount monitor speaker. This unit is designed and manufactured to monitor sound from any stereo RCA line level output, or a single balanced XLR at line level. The chassis design gives the HR155 the ability to be mounted in very tight applications. It will work great in racks, or anywhere a small monitor speaker is required. The HR155 is built in an all metal chassis and weighs 1.25 pounds. Overall dimensions are 7.5" X 3.125" X 1.75".
The HR155...
