-
Item# BYB-LVPRO30
The LVPRO30 is the tool that does it all. This industry leading cable tester is the one tester you need to run a variety of cable testing procedures like, Cable Map, Ethernet Switch Port Blink, Speaker Pop, Cable Length, PoE Volts, Battery Test, 10/100/1000 indication & the ability to print results. The LVPRO30 allows you be the PRO in any cable testing situation
WALL JACK AND SPEAKER IDENTIFIERS:
Low voltage work also calls for wall jack identifiers... and speaker identifiers...

-
Item# BYB-CTX200
The perfect tester for any toolbox. Performs a TIA568 test on Ethernet cable (RJ45) with instant pass/fail results. Ruggedized and cushioned for toolbox use with a hidden drawer for remote storage. Includes a tone generator compatible with most tone probes including Byte Brother brand. Features: Test both RJ45-CAT5/6 and coax cables
Ruggedized for field use. No LCD to break
Pass/Fail results appear in one second
Each pairs status is highlighted.
Complete TIA568 test performed. Continuity, opens/shorts,...

-
Item# TRIPL-SONICHEK
The Triplett 3550 SoniChek PRO Professional Sound Level Meter is a professional sound level meter designed to be used in industrial applications where ANSI standards are called for. This highly accurate meter was designed according to IEC651 (Type 2) and ANSI S1.4 (Type 2) standards. Its large backlit display and A/C weighting make it an ideal choice for any installer. Overall, the SoniChek PRO is well suited for a variety of commercial and residential applications such as fire alarm, home...

-
Item# BYB-BSX200
Handles the most critical butt set requirements in a compact kit. Simple to operate.Has the most commonly needed functions! Includes Caller ID and 3 types of line plugs.
Includes the following features............
Dial Tone
Dial Out
Caller ID
Last Number Redial
On/Off Hangup Button
Flash Button
DTM and FSK Support
Last Number Redial
3 Types Of Line Plugs
Features: 10 Key Keypad
Dial Tone Test
Selectable Tone/Pulse Dialing
ON/OFF Hook Button
Last Number Redial Memory
Caller ID
Adapters...

-
Item# BYB-CTX590
The Pro Tone probe is full featured, with the look, feel and toughness to work all day, every day. Powered by a 9V battery (included). Compact and powerful, the Pro Tone generator is the perfect match for the Pro Tone probe. 9V battery Included. The easy storage place for the tone generator and probe. Soft and conformable, the case takes up just a little space in your toolbox. Features: Unique, fantastic ultra bright LED illuminates even the darkest wiring closets to promote accurate, safe work
Fluorescent...

-
Item# BYB-TVR
Test, verify and repair 10, 100 and 1000 Base-T Networks! The latest modelsupports all network speeds; displays full and half duplex; and detects PoE (Powerover Ethernet). Go inline between two LAN devices and see if the negotiated speed and duplex is what you expect!
The TVR10/100/1000 is comprised of two units: The "Main unit" and the "Remote Probe." The Main unit performs the bulk of the tests such as determining the LAN device type (is it a hub/switch or PC?), the LAN speed and duplex (10,...

-
Item# TRIP-8073
Triplett 8073 CamView IP Pro, Pro+, and Pro-D are designed to facilitate the installation and maintenance of surveillance video equipment. The Tester works with both Standard Definition analog NTSC/PAL camera systems, High Definition Analog, and ONVIF conformant IP (Ethernet) camera systems. Also, the testers provide an RS485 port for PTZ control of analog PTZ cameras and can provide POE for operating IP cameras, or 12VDC (not to exceed 2A) to power analog cameras. The IP Camera Tester allows...

-
Item# TRIPL-8064
The Triplett CamView 8064 Analog Camera Tester is designed to facilitate the installation and maintenance of surveillance video equipment using Standard Definition analog NTSC/PAL, HD-TVI, HD-CVI, and AHD camera systems. The Tester has an RS485 port for testing the Pan-Tilt-Zoom (PTZ), and supports more than 30 PTZ protocols. It can also provide 12VDC (not to exceed 1A) to power the analog camera. You can also use it to check microphone/audio on the camera, or take advantage of the built-in...

-
Item# TRIPL-8150
The Triplett Model 8150 CamView IP Pro 5 has a 5 inch IPS touch screen monitor and is designed for the maintenance and installation of IP cameras, analog cameras, TVI, CVI, AHD cameras, as well as for testing 4K H.264 /H.265. The 1920 x 1080 resolution enables it to display network HD cameras and analog cameras in high resolution. The unit supports ONVIF PTZ and analog PTZ control and is compatible with more than 30 protocols. The combination of touch screen and key buttons make the CamView...

Our Price: $299.99
Availability: Extended Lead Time. Email, Chat or Call Us for more details.
Add to Wish List
-
Item# TRIPL-8174
The Triplett Model 8174 CamView 7" Security Camera Tester with 7" Retina touch screen (1920 x 1200 resolution), 16 hour battery life, and advanced capabilities is ideal for CCTV system installation and maintenance, Network cabling project installation and maintenance, 8MP TVI/8MP CVI/8MP AHD/H.265/H.264/4K camera testing with PTZ control, and video transmission channel testing. HDMI input & output supports up to 1080p. Network testing includes: Ping, IP scan, Port Flash, DHCP server, Trace...

-
Item# TRIPL-9200B
2 Options AvailableThe Triplett 9200 is a 3 3/4 (4000 count) mini AC digital clamp-on meter with a large display. It measures 300A True RMS AC Current and features a Data Hold function. Built-in non-contact AC Voltage tester. The ABS plastic housing provides impact and drop resistance in a sleek ergonomic design, and the user-friendly Auto Ranging helps maximize results. With an industry standard CAT III 300V design it provides resistance to damage from transient overvoltages in any demanding settings. The...
Read More
-
Item# TRIPL-CM650
2 Options AvailableThe Triplett Model CM650 True RMS Clampmeter can measure AC and DC current up to 600A without breaking the circuit by clamping around a single conductor. This saves time and the circuit will not be damaged. True RMS provides better accuracy when measuring non-sinusoidal or noisy waveforms. Additional measurements include Resistance, Capacitance, Frequency, Temperature, Diode Test, and Continuity. Measurements can read on the 4000 count backlit LCD. It has an Inrush current function that captures...
Read More
-
Item# TRIPL-CTX1200
The Triplett Model CTX1200 Network Tester can be used for network cabling project installation and maintenance, computer room detection and maintenance, and CCTV system installation. It features a built-in TDR that tests for opens, shorts and length (1.2km max) on UTP, CAT 6e/5e, BNC and telephone line cable, combined network ping testing, port flashing, and IP address scan to quickly identify connected network port speed (10/100/ 1000M), and detect duplex mode (full or half). The built-in...

-
Item# TRIPL-CTX200PA
The Triplett CTX200P RJ45/Coax Tester performs a TIA568 test on CAT5/6 network cable (RJ45) with instant PASS/FAIL results - opens/shorts, reversals, split pairs, and continuity. It is ruggedized and cushioned for toolbox use with a hidden drawer for remote storage. Includes a built-in tone generator for tracing and troubleshooting inductive tone probe. Complete with tracer probe, BNC patch cable, CAT 6 RJ45 patch cable, BNC terminator, (2) 9V batteries, belt clip and...

-
Item# TRIPL-CTX590A
The Triplett CTX590A ProTone Wire Locater Kit features a powerful tone generator and probe. The CTX590 functions as a high quality wire locating tool that uses an inductive probe to sense a tone placed on the wires by its associated tone generator. The tone generator provides RJ11, RJ45 and insulated alligator clip connections. The Red/Green LED on the probe indicates continuity, voltage, and polarity. The probe also includes a sensitivity control. The CTX590A can be used for tracking down...

-
Item# TRIPL-EMF20
The Triplett EMF20 Magnetic Field Meter measures electro-magnetic field of extremely low frequency (ELF) from 30 to 300Hz produced from electric transmission equipment, power lines, microwave ovens, air conditioners, refrigerators, computer monitors, fans, hairdryers, and many other appliances. Measurements can be displayed in milligauss or µTesla. It features a single axis sensor, ±2.5% accuracy, and a Max Hold function. Includes 9V battery and carrying...

-
Item# TRIPL-LT65
2 Options AvailableThe Triplett Model LT65 Digital Light Meter measures light intensity (up to 40k Foot candles/400k Lux) and verify OSHA safety requirements from fluorescent, metal halide, high-pressure sodium, and incandescent sources found in factories, parking lots, schools, offices, transportation lines, warehouses, hospitals, schools, and many other environments. It features a silicon photodiode sensor with spectral response filter, Min/Max function that recalls highest and lowest readings, Data Hold...
Read More
-
Item# TRIPL-LT80
2 Options AvailableThe Triplett Model LT80 LED Light Meter measures light intensity and verify OSHA safety requirements from white LED light sources up to 40k Foot candles (400k Lux. ) now being incorporated in factories, parking lots, schools, offices, transportation lines, warehouses, hospitals, schools, and many other environments. It will also measure light from fluorescent, metal halide, high-pressure sodium, and incandescent sources. It features a 9,999 count LCD display, silicon photodiode sensor with...
Read More
-
Item# TRIPL-LVPRO30SR
The Triplett LVPRO30SR is the tool that does it all! This industry leading cable tester is the one tester you need to run a variety of cable testing procedures including Cable Map, Ethernet Switch Port Blink, Speaker Pop, Cable Length, PoE Volts*, Battery Test, and 10/100/1000 indication*, with the ability to print results*. The LVPRO allows you be the pro in any cable testing situation. It. The LVPRO30SR also includes RJ45/ Alligator Clip adapters, patch cable, 9V battery, and zippered,...

-
Item# TRIPL-MM650
2 Options AvailableThe Triplett Model MM650 is a 6000 count high performance digital multimeter with True RMS readings to provide better accuracy when measuring non-sinusoidal or noisy waveforms. It offers a large variety of measurement features including AC/DC Voltage, AC/DC Current, AC/DC µA Current, Resistance, Temperature, Frequency, Capacitance, Continuity, and Diode Test. Additional features include 61-segment analog bargraph, backlit LCD, buttons and switch selector, Lo Z (impedance) mode for identifying...
Read More
-
Item# TRIPL-POE1000IL
2 Options AvailableUnderstanding what data and power is on a CAT5/5 cable is becoming increasingly important as cables are becoming crowded with a wide variety of data devices and power sources. The Triplett POE-1000IL Power Panel CAT5/6 DVM is the right tool because once connected, it goes to work scanning each pin on a connector and displaying both the activity and pair location. Whether it be network devices, phones, or Power Over Ethernet, all is displayed. If you are a VOIP phone and IP camera installer,...
Read More
-
Item# TRIPL-RHDL50
2 Options AvailableThe Triplett Model RHDL50 USB Temperature and Humidity Datalogger can record up to 16,000 readings each for Temperature and Humidity in virtually any indoor setting. This can elimate the manual recording of data in labs, greenhouses, warehouses, HVAC systems, storage areas, office space, classrooms, museums, and other place where temperature and humidity have to me monitored. It features a user adjustable sampling rate from 2 seconds to 24 hours and high/low alarms with visual alert when...
Read More
-
Item# TRIPL-SLM400
4 Options AvailableThe Triplett SLM400 Sound Level Meter can be used to test and verify sound levels for worker safety (OSHA), community noise ordinances, night clubs/concerts, airports, mines, athletic events, construction sites, vehicle testing, wind farms, new product noise reduction, and other applications. The sound level meter meter meets IEC 61672-1 type 2, ANSI S1.4 Type 2 with ±1.5dB accuracy. It features a 35 to 130dB range plus A and C weighting with selectable fast/slow response time. Includes...
Read More
-
Item# TRIPL-TDR100
The Triplett TDR100 is a precision cable tester that uses TDR (Time Domain Reflectometer) technology to measure cable length. It can be used for any cable consisting of at least 2 insulated metallic elements, one of which may be the sheath or shield of the cable. The meter has automatic internal matching networks to allow testing with automatic selection range, which correspond to power, telephony, CAT V, LAN, etc. cables.The meter can be closely matched with the cable under test using the...

-
Item# TRIPL-VTM-KIT
The Triplett Video Test Module (VTM-KIT) for the LVPro Model 20, 30 and 30SR extends the test and diagnostic capabilities of your LVPro cable tester by simply attaching the expansion connector harness in the LVPro cable tester to the module, and then securing the module to the tester. No additional software updates are required. With this new and powerful test module HDMI cable and Coax cable testing can be done.The VTM allows you to perform HDMI cable testing and type identification with...
