Glensound Beatrice D8+ 8-Channel Dante Network Audio Desktop Intercom with Analog I/O - Mains or PoE Powered

ITEM #: GS-BEATRICE-D8-P MFG #: BEATRICE D8+

Primary Image
  • Product Image Thumbnail 1 of 4
  • Product Image Thumbnail 2 of 4
  • Product Image Thumbnail 3 of 4
  • Product Image Thumbnail 4 of 4
Free Shipping with $49 Minimum Order

Our Price:

$2,927.00

Availability: Usually Ships in 5-14 Days.
Please Email, Chat or Call (800) 522-2025 for Detailed Delivery Info
iAvailability Description Popup


BEATRICE D8+ - Overview

Fully Featured Beatrice R8 in a Desktop Format!

The Glensound BEATRICE D8+ is a versatile and fully featured 8 channel desktop intercom with crystal clear audio designed for broadcast, theatre and professional audio applications.

It is part of the Beatrice intercom system that utilizes the reliable and proven Dante network audio transmission protocol to allow real time distribution of uncompressed audio across standard networks, it is also AES67 compliant. As such the BEATRICE D8+ is fully compatible with other manufacturers' equipment using the Dante and/ or AES67 protocols.

This desktop intercom was designed to be very easy to use for the operator and simple to set up for the technician. It includes all the basic functionality required for small intercom systems and none of the overly complex installation requirements normally associated with large systems.

8 Channels Of Intercom
One single user connected to the unit can listen to and communicate with 8 separate locations on the network. Depending upon how the Dante network has been routed, the incoming audio circuits and outgoing circuits can be different locations.

Dante Routing & Partyline
Audio routing to/from other devices is setup using Dante controller which allows for point to multipoint routing on outgoing circuits (but only 1 single incoming circuit for each of the 8 channels). Therefore Glensound has included an inbuilt fixed ratio 14 input 19 output mixer matrix with inputs and outputs connected directly to the Dante/AES67 network which allows for setting up partyline and complex group circuits.

Onboard Mic & External Mic Input
A good quality, clear sounding microphone amplifier designed for communication purposes is fitted which also has the benefit of a compressor/limiter circuit to help keep levels and intelligibility consistent even when the operator gets overly excited. This microphone amp has two microphone sources, either the inbuilt front panel mounted electret capsule which provides good voice intelligibility from normal working distances, or a balanced XLR input for connecting external gooseneck microphones. 12V Phantom power is also available and can be turned on/off as required via an internal link.

High Output Intelligible Loudspeaker
What's the point of an intercom unit if the onboard speaker is so cheap that you can't understand what is being said to you? Glensound has tried hundreds of different drive units before settling on the one used in the Beatrice D8+. They chose it because it had a much cleaner sound and better frequency response for vocals than any other speaker on the market that would fit in the desktop unit.

  • Features:

    • Redundant Twin Copper & Twin Fiber Ethernet Interface
    • 9x Solid State Relay Outputs
    • Microphone Level Meter
    • Channel Input and Output Gain Controls
    • Call Function
    • Monitor Selection
    • Presence Indication
    • Speaker Output
    • 2x 4-Wire Connectivity
    • Local Input and Output Circuits
    • Mixer Matrix for Partyline
    • Dante and AES67 Compliant
    • 48kHz Crystal Clear Digital Audio
    • Low Noise Microphone Amp
     
  • Specifications:

      Audio
    • Mic Gain Range: +61dB - +21dB
    • Mic Input: 3-pin XLR on top panel
    • Phantom Power: 12V (set by internal link)
    • Equivalent Input Noise: -126dB (20Hz - 20kHz A-weighted 150Ω)
    • Headphone Impedance: 32Ω - 1000Ω
    • Max Headphone Output Level: +14dB into 600Ω
    • Headphone Connector: 1/4" TRS socket
    • Band Pass Filter: 50Hz - 15kHz
    • Headset Connection: 4-pin and 5-pin XLR on rear panel

      Call Circuit
    • Inband Calling Frequency: 20kHz
    • Amplitude: -20dBFs
    • Duration Of Signal: 2 seconds
    • Compatibility: All Glensound Beatrice units and Studio Technologies

      Power
    • Mains Voltage: 100V - 240VAC ±10%
    • Mains Frequency: 50Hz - 60Hz
    • Power Over Ethernet (PoE): 48V
    • Consumption: 15W
    • Redundancy: Mains and PoE are dioded together for glitch free redundancy

      Physical
    • Mechanics: All aluminum with laser etched anodized panels and light textured black powder coated sides, base and lid
    • Size (WxDxH): 13.7" x 6.7" x 3.8" (349mm x 172mm x 98mm)
    • Weight: 4.2lbs (1.87kg)

      Environmental
    • Operating Temperature: 32°F - 122°F (0°C - 50°C)
    • Storage Temperature: -4°F - 158°F (-20°C - 70°C)
    • Relative Humidity: 0% - 95% non-condensing

      GPIO
    • GPO: Solid State Relays wired Normally Open & Normally Closed
    • GPI: Logic level pull down to ground to operate

      Network Options
    • Physical: 2x Neutrik EtherCONs Cat6 RJ45s & 2x SFP slots
    • Type: Fully redundant primary & secondary circuits
    • Sample Frequency: 48K
    • Resolution: 24-bit
    • Control & Routing: Via Free Dante Controller
    • AES67: Can be configured for AES67
     
  • Item Includes:

    • 1x Beatrice D8+
    • 1x 6.6ft (2m) Cat5 RJ45 Plug/Cable
     
  • Warranty:

    • 2 Year Warranty
     

BEATRICE D8+ - Required Accessories

    California Residents:
    WARNING:
    Cancer and Reproductive Harm - www.P65Warnings.ca.gov