Continue Shopping View Cart
Markertek - The Future of Broadcast Supply

Call 800-522-2025
M-F 8:30am - 7pm EST

Employee-Owned-Banner

Secure LoginClose X

Returning Markertek Customers

New Markertek Customers





Why Create an Account?

Creating a Markertek account now will save you time on future orders. You'll have full access to your order history and a personalized shopping experience.

 
close - X

 
Neutrik NA2-IO-DLINE Bi-Directional DANTE Audio Interface With Balanced XLR and Ethernet Connections
  • Neutrik NA2-IO-DLINE Bi-Directional DANTE Audio Interface With Balanced XLR and Ethernet Connections
  • Neutrik NA2-IO-DLINE Bi-Directional DANTE Audio Interface With Balanced XLR and Ethernet Connections
  • Neutrik NA2-IO-DLINE Bi-Directional DANTE Audio Interface With Balanced XLR and Ethernet Connections
 
Questions? Ask a Markertek Expert:
800-522-2025 Email

Neutrik NA2-IO-DLINE Bi-Directional DANTE Audio Interface With Balanced XLR and Ethernet Connections

Manufacturer: Neutrik USA Inc

Item #: NA2-IO-DLINE   •   MFG #: NA2-IO-DLINE

 

List Price:$345.00
Our Price:$275.00

free ship
 
 
Availability: In Stock
i
Item is Available for immediate shipping from our warehouse.
 
 
     

    Share!

     
     
     

    Connect your legacy audio gear to the Dante® world. The NA2-IO-DLINE is an end-of-network device. It is a breakout box which allows two channels of audio to be integrated into a Dante® network. Simultaneously, NA2-IO-DLINE converts a Dante® stream into analog audio signals. Hence, it is possible to use this tiny box to feed analog audio signals into the Dante® network while at the same time receiving a mix from another Dante® source.

    Neutrik NA2-IO-DLINE is designed for harsh stage conditions. It therefore features lockable chassis connectors for both the audio and network connections. For fixed installations, the rubber protection can be removed. With optional mounting brackets or a rack panel, the box can be mounted below tables, in floor boxes, or in equipment racks.

    Please note!
    The Dante adapter can be connected to a Dante network via a standard 100 Mb/s twisted-pair Ethernet cable (CAT5e). This individual connection is responsible for the data transfer as well as for the power supply. Depending on the cable length and shield, we do not recommend installing cables parallel to power supply lines.

     
    • Features

      • Connect analog audio equipment to a Dante® network
      • Heavy duty adapter for rugged stage conditions
      • Lockable audio and network connections
      • Convert up to two analog line signals to a Dante® network
      • Feed non Dante® ready amplifiers, speakers or mixing desks with signals from the Dante® network
      • Requires a Power over Ethernet switch or a PoE injector (802.3 af/at; class 1)
      • AES67 compliant
      • Rack mountable
       
    • Specifications

      • Dante™ specifications
      • Channels: 2 INPUTS (line level), 2 OUTPUTS (line level)
      • Supported sampling rates: 44.1 / 48 / 88.2 / 96 kHz
      • Bit depth: 16, 24 and 32 Bit
      • Latency: Depending on the network configuration, 1 ms (standard)
      • Ethernet connection: 100BASE-TX (PoE support)

        Electrical specifications
      • Power consumption: < 2 watts
      • Power supply: PoE switch (Power over Ethernet) or
      • PoE injector (according to IEEE 802.3af/at, class 1)

        Analog audio input
      • Input impedance 6.6 kOhm
      • Input level (balanced) Max. 22 dBu
      • Frequency response 20 Hz to 20 kHz (+/-0.5 dB)
      • Dynamic range > 100 dB
      • Signal-to-noise ratio > 100 dB
      • THD + noise: < 0.01 % @ + 4 dBu, A-weighting
      • Crosstalk < -80 dB @ 20 kHz

        Analog audio output
      • Output impedance < 800 Ohm
      • Output level (balanced) Max. 16 dBu
      • Frequency response 20 Hz to 20 kHz (+/-0.5 dB)
      • Dynamic range > 100 dB
      • Signal-to-noise ratio > 100 dB
      • THD + noise: < 0.01 % @ + 4 dBu, A-weighting
      • Crosstalk < -80 dB @ 20 kHz

        Mechanical specifications
      • Weight 0.44 kg (1 pound)
      • Dimensions (with rubber protection)
      • L = 164 mm (6.3 inches)
      • B = 82 mm (3.2 inches)
      • H = 51 mm (2.0 inches)
      • Dimensions (without rubber protection)
      • L = 151 mm (5.9 inches)
      • B = 66 mm (2.6 inches)
      • H = 41 mm (1.6 inches)
      • Operating environment Indoor
      • Operating temperature -5°C to +70°C
      • Storage temperature -40°C to +150°C
       
     
     

    Add Accessories for your NA2-IO-DLINE:

     
     
     
    Please fill out the information below
    Email Address*