Shure ANI4OUT-BLOCK Dante Digital Audio Network Interface with PEQ & Summing - 4-Output Block Connectors - POE Required

ANI4OUT-BLOCK - Overview

Converts Dante™ digital audio signal to four discrete line / mic analog signals

• Features:

  • Single Ethernet port carries Dante audio, power (PoE - class 0)
  • LEDs indicate device status and audio signal
  • Control strings for third-party preset controllers including Crestron® and AMX®
  • 4 Band C/S PEQ on every channel
  • Provides channel summing to combine Dante™ signals from the network and send them over a single analog output
  • Browser-based software control for all device parameters, per output channel: Mute control - Digital gain - Polarity control
  • 1/3 Rack unit wide
  • Chassis ground screw (BLOCK version only) provides common chassis ground for multiple inputs
   

• Specifications:

  • Input: (1) RJ45
  • Outputs: (4) 3-pin block connector
  • Configuration: Impedance Balanced
  • Polarity: Non-inverting, any input to any output
  • Power Requirements: Power over Ethernet (PoE), Class 0
  • Power Consumption: 10W, maximum
  • Weight: 1.5 lbs
  • Dimensions H x W x D: 1.6 x 5.5 x 5.0 in
  • Control application: HTML5 Browser-based
  • Operating Temperature Range: 20°F to 104°F
  • Storage Temperature Range: -20°F to 165°F
  • Audio Frequency Response: 20 to 20,000 Hz
  • Latency: Does not include Dante latency, 0.71 ms
  • Dynamic Range (Dante-to-Analog): 20 Hz to 20 kHz, A-weighted, typical, 117 dB
  • Total Harmonic Distortion: @ 1 kHz, -20 dBFS Output, 0 dB analog gain, <0.05%
  • Output Clipping Level: Line: +20 dBV, Aux: +0 dBV, Mic: -26 dBV
  • Output Impedance: 150 Ω
  • Networking Cable Requirements: Cat 5e or higher (shielded cable recommended)
  • Please Note: Important Product Information: This device is not intended to be connected directly to a public internet network, this equipment is intended to be used in professional audio applications. EMC conformance to Environment E2: Commercial and Light Industrial. Testing is based on the use of supplied and recommended cable types. The use of other than shielded (screened) cable types may degrade EMC performance. Changes or modifications not expressly approved by Shure Incorporated could void your authority to operate this equipment.
   

• Item Includes:

  • 1x ANI4OUT-BLOCK Dante Digital Audio Network Interface w/ 4-Output Block Connectors
   

• Warranty:

  • Limited 2-Year Manufacturer Warranty
   

• GTIN:

  0042406475464