Studio Technologies Model 209-U Tabletop Talent Console Compact Audio Controller - Dante / AES67

ITEM #: STCH-M209-U MFG #: M209-U

Primary Image
  • Product Image Thumbnail 1 of 2
  • Product Image Thumbnail 2 of 2
Free Shipping with $49 Minimum Order

Our Price:

$995.00

Availability: Usually Ships in 5-14 Days.
Please Email, Chat or Call (800) 522-2025 for Detailed Delivery Info
iAvailability Description Popup


M209-U - Overview

Offers a unique combination of audio, remote control, and tally-output resources for use in podcast and other specialized audio applications!

The Studio-Technologies Model 209-U is identical to the Model 209 Talent Console except that the unit is intended for mounting to the top plane of a tabletop or other flat surface. (The suffix "-U" indicates it is upside down from standard.) The unit incorporates a revised front-panel label and back-panel graphics. The firmware (embedded software) accounts for reversed controls and LED indicators.

The Model 209 Talent Console offers a unique combination of audio, remote control, and tally-output resources for use in podcast and other specialized audio applications. The unit is housed in a compact enclosure that's intended for mounting under a tabletop, within custom furniture, or as part of an on-air set.

The Model 209 supports Dante audio-over-Ethernet digital media technology as well as AES67 for integration into contemporary applications. In addition, Audinate's Dante Domain ManagerT software application is supported.

The Model 209 is extremely simple to deploy, is "pro" quality throughout, and provides an intuitive user experience. The Model 209's audio quality is excellent, with low distortion, low noise, and high headroom. Careful circuit design and rugged components ensure long, reliable operation.

The Model 209 integrates directly into Dante audio-over-Ethernet environments. With just a Power over Ethernet (PoE) connection, a microphone, and a pair of headphones or an earpiece, a complete audio "position" can be created. In addition, remote control inputs and tally outputs allow the Model 209 to integrate directly into more complex applications.

A host of Model 209 features are configured using the STcontroller personal computer software application. This allows the unit's operation to be tailored to meet the exact needs of many installations. STcontroller is a fast and simple means of confirming and revising the unit's operating parameters.

Applications:
The Model 209 can provide an "all-Dante" solution for one podcast location. A wide range of other applications can also be supported, including sports and entertainment TV and radio events, streaming broadcasts, corporate and government AV installations, and post-production facilities. The unit's capabilities allow it to be easily integrated into REMI/At-Home applications.

  • Features:

    • Dante audio-over-Ethernet technology
    • High-performance microphone preamplifier with selectable gain and P48 power
    • Flexible headphone monitoring with sidetone
    • Tally outputs that can directly drive boom arm status LEDs
    • Ideal for podcast, voice-over booth, and REMI applications
    • Superior audio quality
    • Extensive feature configuration using STcontroller application
    • Power over Ethernet (PoE) powered
     
  • Specifications:

      Network Audio Technology
    • Type: Dante audio-over-Ethernet
    • AES67-2018 Support: yes, selectable on/off
    • Dante Domain Manager Support: yes
    • Bit Depth: up to 32
    • Encoding Choices: PCM 16, PCM 24, or PCM 32
    • Sample Rate: 48 or 96 kHz
    • Pull-Up/Down Support: no
    • Dante Transmitter (Output) Channels: 2
    • Dante Receiver (Input) Channels: 2
    • Dante Audio Flows: 4; 2 transmitter, 2 receiver
    • Internal Digital Audio Processing: 32-bit, fixed
    • Transmitter (Output) and Receiver (Input) Nominal Level: -20 dBFS

      Network Interface
    • Type: 100BASE-TX, Fast Ethernet per IEEE® 802.3u (10BASE-T and 1000BASE-T (GigE) not supported.)
    • Power over Ethernet (PoE): Per IEEE 802.3af
    • Data Rate: 100 Mb/s (10 Mb/s and 1000 Mb/s not supported)

      Analog Microphone Input
    • Compatibility: dynamic or phantom-powered microphones
    • Type: balanced, capacitive coupled
    • Impedance: 3.6 k (3600) ohms, nominal
    • Gain: 20-65 dB in 1-dB steps
    • Frequency Response: 20 Hz-22 kHz, +0/-1 dB
    • Distortion (THD+N): <0.0004 %, 1 kHz, -4 dBFS output, 20 dB gain, 22 kHz BW
    • Dynamic Range: 120 dB, ref 0 dBFS output, 20 dB gain, A-weighted
    • Phantom Power: P48 per IEC 61938 standard, on/off selectable with status LED

      Headphone Output
    • Type: dual-channel
    • Compatibility: intended for connection to stereo (dual-channel) or monaural (single-channel) headphones, headsets, or earpieces with nominal impedance of 50 ohms or greater
    • Maximum Output Voltage: 3.5 Vrms, 1 kHz, with load of 150 ohms
    • Frequency Response (TOX Filter Disabled): 20 Hz-20 kHz, +0/-1 dB
    • Frequency Response (TOX Filter Enabled): 20 Hz-10 kHz, -3 dB at 10 kHz
    • Distortion (THD+N): <0.002 %
    • Dynamic Range: >102 dB

      Remote Control Inputs: 2
    • Functions: configurable
    • Type: active low, 1 mA maximum, input pulled up to 3.3 volts DC by way of 3.4 k (3400) ohm resistor

      Tally Outputs: 2
    • Functions: independently configurable, can follow STcontroller On/Off buttons, Dante main transmitter (output) status, remote control input status, or TOX (Tone Operated Relay) status
    • Type: active high, active low, differential - active high, differential - active low, configurable
    • High Output: 100 mA maximum at 12 volts DC
    • Low Output: 100 mA sink

      TOX (Tone Operated Relay) Tally Activation
    • Method: in-band audio tone
    • Source: Dante receiver (input) Headphone Ch1 or Dante receiver (input) Headphone Ch2, selectable
    • Tone Characteristics: 18-23 kHz, nominal
    • Minimum Level: -25 dBFS, nominal
    • Detect Time: 10 milliseconds, minimum

      Connectors
    • Ethernet: RJ45 jack
    • Microphone Input: 3-pin female XLR
    • Headphone Output: 3-conductor (TRS) 1/4-inch jack and 3-conductor (TRS) 3.5 mm jack
    • Remote Control Inputs: 3-conductor (TRS) 3.5 mm jack
    • Tally Outputs: 3-conductor (TRS) 3.5 mm jack
    • USB: Type-A receptacle (used only for updating firmware)

      Ethernet Control
    • UDP commands allow support of remote control and status indication functions (refer to the STcontroller API UDP Examples document, available on the Studio Technologies' website)

      General
    • Operating Temp: 32 to 122°F
    • Storage Temp: -40 to 158°F
    • Humidity: 5-95%, non-condensing
    • Altitude: not characterized
    • Dimensions (Overall): 4.7" 1.4" x 5.8"
    • Weight: 0.55lbs
    • Power Source: Power over Ethernet - class 2 per IEEE® 802.3af
    • Software Updating: USB flash drive used for updating main firmware files; Dante Controller's Dante Updater application used for updating Dante interface firmware
     
  • Item Includes:

    • 1x Model 209-U
     

M209-U - Required Accessories

    California Residents:
    WARNING:
    Cancer and Reproductive Harm - www.P65Warnings.ca.gov