Tripp Lite SMART2200NET SmartPro 120V 2.2kVA 1.7kW Line-Interactive Extended Run UPS Tower with 3x DB9 Ports

SMART2200NET - Overview

• Features:

  • SMART 2200NET line interactive UPS offers battery derived AC output during power outages, voltage regulation during brownouts and overvoltages, plus network-grade AC surge suppression
  • 2200VA/1700 watt power handling capability supports a variety of networking, telecom and other sensitive electronic devices
  • Large internal batteries offer runtimes of 27 minutes at half load (1100VA/850 watts) and 11 minutes at full load (2200VA/1700 watts)
  • Runtime is further expandable with optional external BP24V28-2U (limit 1) and BP24V70-3U (multi-pack compatible) battery packs
  • Automatic Voltage Regulation (AVR) circuits maintain 120V nominal output over an input voltage range of 87-140V
  • Includes 6 fully protected NEMA 5-15R outlets with 2 single outlet load banks that can be individually powered off and back on again via software interface
  • PowerAlert UPS monitoring and unattended shutdown software enables configurable network broadcast messaging, email notification, event logging and running user defined script commands
  • Offers simultaneous monitoring of up to 3 directly connected devices through included DB9 contact closure and RS-232 enabled interfaces, or the monitoring of any number of additional servers over IP with included PowerAlert monitoring software
  • In addition to the contact closure monitoring of on battery, low battery and power restored messaging, built-in RS-232 interface supports messaging of UPS and line power status, including AC line voltage, DC battery voltage and remaining battery capacity
  • Supports activate self-test and UPS output power control for delayed or immediate reboot of connected equipment
  • Diagnostic LEDs (indicate 17 performance conditions)
   

• Specifications:

  Input
  • Input Phase: Single-Phase
  • Rated input current (Maximum Load): 15A
  • Nominal Input Voltage(s) Supported: 120V AC
  • UPS Input Connection Type: 5-15P
  • Input Circuit Breakers: 20A
  • UPS Input Cord Length: 8ft
  • Recommended Electrical Service: 20A 120V
  • Maximum Input Amps: 15
    
    Output
  • Output Capacity (VA): 2200
  • Output Capacity (kVA): 2.2
  • Output Capacity (Watts): 1700
  • Output Capacity (kW): 1.7
  • Output Capacity Details: Output is reduced to 1200W maximum with 1-2 external battery packs and 800W maximum with 3 or more external battery packs
  • Power Factor: 0.8
  • Nominal Voltage Details: 120v nominal output in battery mode
  • Frequency Compatibility: 60 Hz
  • Output Voltage Regulation (Line Mode): -13% / +5%
  • Output Voltage Regulation (Battery Mode): +/- 5%
  • Load Management Receptacles: Two switchable single outlet 5-15R load banks
  • Output AC Waveform (AC Mode): Sine wave
  • Output AC Waveform (Battery Mode): PWM sine wave
  • Nominal Output Voltage(s) Supported: 110V; 115V; 120V
  • Output Receptacles: (6) 5-15R
  • Individually Controllable Load Banks: Yes
    
    Battery
  • Battery Type: Valve Regulated Lead Acid (VRLA)
  • Runtime Full Load (min.): 11 min. (1700W)
  • Runtime Half Load (min.): 27 min. (850W)
  • Expandable Runtime: Yes
  • External Battery Pack Compatibility: BP24V28-2U (limit 1); BP24V70-3U (multi-pack compatible)
  • DC System Voltage (VDC): 24
  • Battery Recharge Rate (Included): Less than 9 hours from 10% to 90% (typical, full load discharge)
    
    Voltage Regulation
  • Voltage Regulation Description: Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 87-140
  • Overvoltage Correction: Input voltages between 127-140 are reduced by 12%
  • Undervoltage Correction: Input voltages between 95-105 are boosted by 10%
  • Severe Undervoltage Correction: Input voltages between 87-94 are boosted by 22%
    
    Surge/Noise Suppression
  • EMI/RFI AC Noise Suppression: Yes
  • AC Suppression Joule Rating: 720
  • AC Suppression Response Time: Instantaneous
    
    Physical
  • Primary Form Factor: Tower
  • Rack Height: 0RU
  • Shipping Dimensions (hwd): 13.75" x 16.50" x 22.50"
  • Shipping Weight (lbs.): 82.16
  • UPS Housing Material: Polycarbonate
  • UPS Power Module Dimensions (hwd): 17.00" x 9.00" x 12.50"
  • Unit Weight (lbs.): 80.00
    
    Environmental
  • Operating Temperature Range: 32° to 104°F
  • Storage Temperature Range: 5° to 122°F
  • Relative Humidity: 0-95% non-condensing
  • AC Mode BTU / Hr. (Full Load): 59
  • AC Mode Efficiency Rating (100% Load): 99%
  • Battery Mode Heat Dissipation (BTU/Hr) @ Full Load: 867
    
    Communications
  • Network Monitoring Port Description: Supports detailed monitoring of UPS and site power conditions; contact closure communications via two additional DB9 ports (3 total)
  • Communications Cable: 3 DB9 cables included
  • Network Management Card Description: Network management not supported
  • Communications Interface: Contact closure; DB9 Serial
    
    Line / Battery Transfer
  • Transfer Time: 2-4 milliseconds
  • Low Voltage Transfer to Battery Power (Setpoint): 87
  • High Voltage Transfer to Battery Power (Setpoint): 140
   

• Item Includes:

  • 1x SMART 2200NET UPS System
  • 1x PowerAlert Software and three 6 foot network cables
  • 1x Instruction manual
   

• Warranty:

  • 2-year warranty, 3 year with registration. Note: Registration is required for 3-year warranty.
   

• GTIN:

  0037332032041