The RTS AudioCom MS-2002 is a complete 2-channel master station and system power supply (24VDC, 2 Amps total power) in a single unit. Simply plug it into any AC power outlet from 100 to 240 volts, add a microphone or headset, connect intercom stations to the back panel, and you're ready to communicate. It has both 1- and 2-channel connectors, so you do not have to add a separate breakout box if you want to mix 1- and 2-channel stations.
The MS-2002 fits in a standard 19-inch equipment rack and is one
(1) rack unit high. The basic MS-2002 can communicate with two (2) intercom channels. This number can be increased by connecting optional EMS-4001 Expansion Stations. Each EMS-4001 adds four (4) addition channels, and up to four (4) of these expansion stations can be connected for a total of 18 channels.
Speaker Station or Headset Station
Use the built-in speaker for listening and add an optional MCP-90 series Gooseneck Panel Microphone for talkback. You can also turn off the speaker volume, and plug in headsets for private communication.
Voice Activated Microphone (VOX)
Separate controls adjust the voice activation level for the headset microphone and panel microphone inputs.
Public Address (PA) Output, with PA key
Use your intercom microphone to talk over a PA system.
Improves visibility in low-light
Incoming Call Indications
Red flashing call light, with beep tone if desired.
Instantaneous Auto Reset (IAR), the newest technology in performance and safety, which uses a revolutionary new circuitry that dynamically monitors line fault conditions. Then, when the fault is removed, automatically brings individual power supply channels up.
Mic Kill Key
You can turn off all microphones on a channel to quickly clear the channel.
Program Input for Each Channel
Connect any line-level audio source for monitoring in the speaker or headset, or for routing to the intercom channel. The program audio to the channel can be set to interrupt while the MS-2002 operator is talking on the channel.
Binaural (Stereo) Listening with External Powered Speakers
You can connect external powered speakers and then monitor channel 1 and 2 as separate right and left audio.
Add more channels by connecting optional EMS-4001 Expansion Stations. Each EMS-4001 adds four additional powered channels (up to eighteen channels).
Please Note! This item is just one component of a larger system. Please refer to the diagram for ideas and recommendations for your intercom system. The diagram shown above is an example of a system that would be a good basis for a multi-purpose facility, such as found in a community TV facility with two smaller studios, that can function as one, or at a convention center with divisible conference areas.