Where to Buy Analog Video Distribution Amplifiers & Splitters

Viewing Item(s):

Display

Show As

ATI MIDA100-3 Metered 1X6 Distribution Amplifier Module for SYS10K - Transformer Output with Phoenix I/O
ATI
Item# ATI-MIDA100-3
The ATI MIDA100-3 System 10K is the ideal device for multiple distribution when it comes to stereo or mono line amplification, microphone amplification, or headphone distribution. The SYS10K is perfect for any ballpark, museum, or large venue such as the United Nations, where many of our SYS10K systems can be found. The 3RU rack holds up to ten function modules and two power supplies. Each plug-in module is supplied with its own applicable connector assembly, thereby allowing for ease...
Our Price: $1,655.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Cobalt Digital ROYAL 9910DA-AV Analog Video Distribution Amplifier openGear Card
Cobalt Digital
Item# CB-9910DA-AV
The Cobalt 9910DA-AV Analog Video Distribution Amplifier is perfect for use as a black burst and tri-level reference DA. It provides 1x8 distribution with one analog input and eight 75Ω analog outputs. Card jumpers allow setting the input as differential (floating ground) or single-ended, and Hi-Z looping input or on-card 75Ω terminated. A trim control located on the front of the card allows gain control. The card can be accessed using DashBoard remote control for status monitoring. ...
Our Price: $422.00
Availability: In Stock
Add to Wish List
AJA C10DA Analog Video/Tri-Level Sync 1x6 Distribution Amplifier
AJA Video
Item# AJA-C10DA
The AJA C10DA is a miniature, low-cost utility 1x6 analog video distribution amplifier that can be used for distributing analog video, bi-level video reference, and tri-level video reference signals in NTSC and PAL formats. It can also be used to distribute other single ended signals such as AES3-id and Linear Timecode (LTC). Featuring six separately buffered analog outputs, the C10DA provides gain adjustment. Features: Compact 1 x 6 Analog Distribution Amplifier NTSC / PAL May be used...
Our Price: $229.00
Availability: In Stock
Add to Wish List
Ross UDA-8705A-R2L openGear Analog Video Utility Distribution Amplifier Card w/ R2L Rear Module
Ross Video
Item# ROSS-UDA8705AR2L
The UDA-8705A is an analog general purpose distribution amplifier in the openGear platform. Use of this amplifier will avoid the need to purchase a separate analog frame and power supply in digital installations. This amplifier may be used in any application where equalization and a differential input is not required - an excellent device for composite and tri-level sync distribution. The use of new generation integrated circuits and innovative engineering has resulted in excellent performance...
Our Price: $462.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Cobalt Digital Royal RM20-9910AV-B openGear 1x8 Analog Splitter Rear I/O Module for 9910DA-AV-EQ
Cobalt Digital
Item# CB-RM20-9910-AVB
Cobalt Digital RM20-9910AV-B Rear I/O Module for CB-9910DA-AV-EQ openGear card. Please note! Rear module only! Card is required for proper integration. Features: Analog Video In (1) Loop Output (8) Analog Video Out (All coaxial connectors BNC)
Our Price: $129.00
Availability: In Stock
Add to Wish List
LYNX Technik Yellobrik DVA 1714 - Analog Video - Sync Distribution Amplifier
LYNX Technik Inc
Item# LNX-DVA-1714
The LYNX Technik DVA 1714 is a compact general-purpose wide band analog distribution amplifier suitable for analog SDTV and HDTV video signals. The module can also be used for analog SDTV Bi-level sync pulses, black reference and analog HDTV Tri-level sync pulses. Features: 1 input and 4 outputs Wide band - 30MHz Adjustable gain and EQ Input Clamp Input present LED indication Suitable for analog SDTV/HDTV video or Sync signals Specifications: Input 1 x 75 Ohm...
Our Price: $380.00
Availability: In Stock
Add to Wish List
Cobalt Digital ROYAL 9910DA-AV-EQ Analog Video Distribution Amplifier with EQ openGear Card
Cobalt Digital
Item# CB-9910DA-AV-EQ
The Cobalt 9910DA-AV-EQ Analog Video Distribution Amplifier with EQ provides 1x8 distribution with one analog input and eight 75Ω analog outputs. Card jumpers allow setting the input as differential (floating ground) or single-ended, AC or DC coupled, and Hi-Z looping input or on-card 75Ω terminated. Trim controls located on the front of the card allow EQ adjustment and gain control. The card can be accessed using DashBoard remote control for status monitoring. Please note!...
Our Price: $441.95
Availability: In Stock
Add to Wish List
ATEN VS184B 18Gbps 4 Port True 4K HDMI Splitter with HDCP 2.2
ATEN
Item# ATEN-VS184B
The VS184B True 4K HDMI Splitter is the perfect solution for anyone who needs to send one source of digital high definition video to four displays at the same time. It supports all HDMI enabled equipment, such as DVD players, satellite set- top boxes and all HDMI monitors, displays, projectors, or TVs. The VS182B True 4K HDMI Splitter is HDMI 2.0 compliant, 4K at 60Hz (4:4:4), and supports multiple streaming audio, making it effective for use with all HDMI displays in home theater...
Our Price: $119.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
HDDA-2 HDTV 1x2 Component Video Distribution Amplifier
Inday
Item# HDDA-2
The HDDA-2 is a 2 output Component Video Distribution Amplifier that can split any component video signal without degradation. Each output has its own High-Current Cable Driver. Features: High current output IC's drive cables les rthan 300 feet easily. No interaction with other outputs. Will accept any analog input, Composite Video, YPbPr or RGB at any scan rate and give you 2 identical High Bandwidth (200MHz) outputs. All Connectors are Gold Plated RCA. All Component formats supported...
Our Price: $64.00
Availability: In Stock
Add to Wish List
ESE ES-207A 1x4 Video Distribution Amplifier
ESE
Item# ES 207A
The ES-207A provides a loop-thru input and four isolated outputs, all accessible via BNC connectors. Screwdriver-adjustable Gain and Equalization controls are provided on the front of the case. Up to 1000 feet of cable may be compensated by adjusting the EQ trimmer. The Gain control provides an overall signal level adjustment of - 2 to +3 db. When the input is not looped thru to other equipment, a 75 ohm terminator should be used on the free input connector. Unused outputs need not be terminated....
Our Price: $166.49
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List

Analog Video Distribution Amplifiers & Splitters

By Brand

By Price Range

Filter By

Narrow Products

By Brand

By Price Range

Filter By

ATI MIDA100-3 Metered 1X6 Distribution Amplifier Module for SYS10K - Transformer Output with Phoenix I/O

Cobalt Digital ROYAL 9910DA-AV Analog Video Distribution Amplifier openGear Card

AJA C10DA Analog Video/Tri-Level Sync 1x6 Distribution Amplifier

Ross UDA-8705A-R2L openGear Analog Video Utility Distribution Amplifier Card w/ R2L Rear Module

Cobalt Digital Royal RM20-9910AV-B openGear 1x8 Analog Splitter Rear I/O Module for 9910DA-AV-EQ

LYNX Technik Yellobrik DVA 1714 - Analog Video - Sync Distribution Amplifier

Cobalt Digital ROYAL 9910DA-AV-EQ Analog Video Distribution Amplifier with EQ openGear Card

ATEN VS184B 18Gbps 4 Port True 4K HDMI Splitter with HDCP 2.2

HDDA-2 HDTV 1x2 Component Video Distribution Amplifier

ESE ES-207A 1x4 Video Distribution Amplifier

Sign In

Analog Video Distribution Amplifiers & Splitters

Narrow Products

By Brand

By Price Range

Filter By