-
Item# MUX-500033
The VideoEase Quad Audio Balun allows up tofour (4) analog line audio signals to betransmitted via unshielded twisted pair (UTP)cable in a point-to-point connection.
Used in pairs, the Quad Audio Balun allows upto four (4) coax audio cables to be replaced byone (1) Cat5 cable. The Quad Audio Balun alsoworks in conjunction with other MuxLab analogaudio baluns such as the 500019. Features: Cost-efficient cabling - save up to four (4)cables
Analog audio up to 5,000 ft (1.5 km) via Cat 5
...
-
Item# MUX-500755
The AUDIO / RS232 over IP PoE Transceiver is an extender that allows 2CH audio signals to be extended up to 330ft (100m) via Cat5e/6 cable in a point-to-point configuration. Point-to-multipoint and multipoint-to-multipoint is supported by connecting several Transceivers to the same local Ethernet network. The device supports PoE (PD) if used with a PoE (PSE) Ethernet Switch, and RS232 and IR transmission (IR Emitters and Sensors sold separately). The Transceiver can be configured as a Transmitter...
-
Item# MUX-500027
Muxlab's500027 allows an unbalanced line-level stereo signal to be transmitted via a single Cat5e/6 cable in a point-to-point connection to distances of up to 5,000 feet/1.5km! Perfect for audio applications where your priority is mid-range audio frequency response. Used in pairs this Stereo/Audio Balun can be used in conjunction with the MUX-500030 audio balun to connect an RCA interface to a 3.5mm audio interface.
The Stereo Audio Balun also works inconjunction with other MuxLab products...
-
Item# MUX-500028-WP-US
The Stereo Hi-Fi Wall Balun (500028-WP-US)allows unbalanced line level stereo analogue audio to be transmitted via Category 5e/6unshielded copper twisted pair (UTP) in a point-to-point connection. The product is designed for audio applications where full-range, hi-fidelity audio frequency response is required.
Used in pairs, the Stereo Hi-Fi Wall Balun eliminates costly and bulky coaxial cable, allowing audio equipment to be connected or moved within a structured cabling environment.
Features:...
-
Item# MUX-500028
The Stereo Hi-Fi Balun allows unbalanced linelevel stereo analogue audio to be transmittedvia Category 5 unshielded copper twisted pair(UTP) in a point-to-point connection. Theproduct is designed for audio applicationswhere full-range, hi-fidelity audio frequencyresponse is required.
Used in pairs, the Stereo Hi-Fi Balun eliminatescostly and bulky coaxial cable, allowing audioequipment to be connected or moved within astructured cabling environment. Features: 20 Hz to 20 KHz bandwidth
Cost-efficient...
-
Item# MUX-500028-2PK
The Stereo Hi-Fi Balun allows unbalanced linelevel stereo analog audio to be transmitted via Category 5 unshielded copper twisted pair(UTP) in a point-to-point connection. Theproduct is designed for audio applicationswhere full-range, hi-fidelity audio frequencyresponse is required.
Used in pairs, the Stereo Hi-Fi Balun eliminatescostly and bulky coaxial cable, allowing audioequipment to be connected or moved within astructured cabling environment.
Features: 20 Hz to 20 KHz bandwidth
Cost-efficient...
-
Item# MUX-500025
2 Genders AvailableThe MonoPro™ XLR (500025, 500026) allows a standard AES analog or digital audio channel to be connected via Category 5 unshielded twisted pair cable (UTP) in the professional audio environment. The product features rugged cable strain relief and comes with locking XLR3 connectors for added cabling versatility. The 500025 and 500026 feature XLR3 plug and XLR3 receptacle respectively. Features: Cost efficient cabling via UTP
Rugged cable strain relief
Line analog audio up to 5,000 ft (1.5km) via...
Read More
-
Item# MUX-500028-F
Used in matched pairs the MuxLab Stereo Hi-Fi Balun 500028-F with it's RCA Female inputs works with a companion 500028-F (sold separately) to allow an unbalanced line-level Hi-Fi stereo analog audio signal to be transmitted via single Cat5e/6 cable in a point-to-point connection to distances of up to 3,250ft / 1km!
The product is designed for audio applications where full-range, hi-fidelity audio frequency response is required.
Applications
Boardroom systems, classroom...
-
Item# MUX-500028-F-2PK
The MuxLab 500028-F-2PK Hi-Fi Balun allows unbalanced line level stereo analogue audio to be transmitted via Category 5e/ 6 unshielded copper twisted pair (UTP) in a point-to-point connection. The product is designed for audio applications where fullrange, hi-fidelity audio frequency response is required.
Used in pairs, the Stereo Hi-Fi Balun eliminates costly and bulky coaxial cable, allowing audio equipment to be connected or moved within a structured cabling environment. Features:...
-
Item# MUX-500030
The Stereo PC-Audio Balun allows unbalanced line level stereo analogue audio to be transmitted via Category 5/6 unshielded copper twisted pair (UTP) in a point-to-point connection. The product is designed for audio equipment equipped with 3.5mm line-level stereo output such as PC sound cards, laptops and multi-media servers where midrange audio frequency response is required. The Stereo PC-Audio Balun works in pairs or in conjunction with other MuxLab products such as the 500019, 500001, 500012,...
-
Item# MUX-500020
The VideoEase Digital Audio Balun allows a digital audio source to be connected up to 600feet (183m) away from a digital audio decoder/amplifier via copper unshielded twisted pair (UTP). Used in pairs, the Digital AudioBalun allows a Digital Audio source such as aDVD, VCR or satellite receiver to be connected via copper twisted pair to a Digital Audio home theatre system in a point-to-point scenario.
The Digital Audio Balun connects directly to the digital audio equipment and features screw terminals...
-
Item# MUX-500086
The Digital Audio Extender allows one (1) source of digital audio signal: coax (S/PDIF) or optic (TOSLINK) to be connected to a receiver: coax or optic to up to 500 ft. (150m) in a point-to-point configuration. The Extender supports most standards to transmit two channels of uncompressed lossless PCM audio or compressed 5.1/7.1 surround sound, such as Dolby Digital Plus or DTS-HD High Resolution Audio (multichannel digital audio Dolby Digital 5.1, DTS, and Dolby True HD).
Features: Extend digital...
-
Item# MUX-500087
The Digital Audio Converter allows one (1) source of digital audio signal: coax (S/PDIF) or optic (TOSLINK) to be converted to an optic or a coax signal respectively. It supports most standards used to transmit two channels of uncompressed lossless PCM audio or compressed 5.1/7.1 surround sound such as Dolby Digital Plus or DTS-HD High Resolution Audio (multichannel digital audio Dolby Digital 5.1, DTS, and Dolby True HD). Features: Convert TOSLINK fiber optic digital audio signal to COAX
Convert...
-
Item# MUX-500088
The MuxLab 500088 Digital Audio Converter, Dolby & DTS converts one LPCM-encoded, one DTS or one Dolby Digital coaxial (S/PDIF) or optical (TOSLINK) digital audio signal to a standard left/right analog audio output, thereby allowing a digital audio source such as a DVD or CD player without RCA analog audio output to be connected to an audio-video receiver or TV. Features: Down-mixes DTS, Dolbyr Digital audio to left/right analog audio
Switch selects between TOSLINK and Coax S/PDIF inputs
TOSLINK...
-
Item# MUX-500080
The MuxLab Digital Audio Converter 500080, converts one LPCM-encoded Digital Coax (S/PDIF) or Digital Optical (TOSlink) audio signal to a standard left/right analog audio output (RCA). This allows a digital audio source such as a BluRay, games console or CD player without a stereo audio output to be connected to an amplifier or TV.
Features: Converts digital audio signals to stereo audio (DAC)
Sample Rate: up to 96kHz
Bit Rate: 24bit S/PDIF bitstream on right and left channels
Input:...
-
Item# MUX-500217
The MuxLab Audio Zone Amplifier 100W is a Class D amplifier which allows analog or digital sources to feed a pair of 50W per channel speakers. When set in Bridge mode and paired with the MuxLab 70V Transformer unit (500755-70V), the system is compatible with distributed 70V speaker systems over longer distances and supporting daisy chain configurations. The device may be controlled locally via pushbuttons and a knob, and remotely via RS232, IR and an IP webserver interface.
The Audio Zone Amplifier...
-
Item# MUX-500219
The Analog Audio Balun Amplifier allows one (1) analog source using the Muxlab Audio Balun (500028) or Muxlab Audio Matrix Switch (500210) to feed a 30W/channel stereo Class D amplifier using UTP Cat5e/6 cable.
Applications: Audio Distribution Systems, Classroom training, Hospitality industry, Podium systems, Home theatre audio, Digital signage, Rental and staging, PA systems, Ceiling and shelf speakers.
Features: RJ45 jack for input and binding posts for output
30W per channel (PMPO) into...
-
Item# MUX-500221
The MuxLab Dante Ceiling Speaker PoE, 40W (500221) is a high performance full band and easy installation speaker ideal for providing background music and vocal performance for a wide range of applications and installations. The speaker is designed with advanced linear sound source technology.
The MuxLab Dante Ceiling Speaker PoE, 40W comes with a 6.5" coaxial 40W loudspeaker driver that has excellent dispersion, wide bandwidth, and smooth frequency response which makes this the top choice...
-
Item# MUX-500765
The Muxlab 500765 Dante/Quad Channel Audio PoE Gateway permits non-Dante compatible analog audio equipment to interface with Dante compatible professional audio equipment. The device supports PoE (PD) and may be powered by a PoE (PSE) Ethernet Switch.
The unit allows Dual two-channel or Quad single-channel full range (20Hz to 20KHz) balanced analog audio signals to be transmitted over the network to Dante compatible professional audio equipment. Dual two-channel or Quad single-channel...
-
Item# MUX-500220
The MuxLab Dante 60W Column Speaker PoE (500220) is a speaker designed with advanced linear sound source technology, each speaker consists of 4 3-inch ferrite bass drivers with 25mm voice coils. It meets the design requirements of linear sound sources and has broad horizontal directivity and narrow vertical directivity, sending the sound to the target area accurately, avoiding reflection from the ceiling and ground while increases the proportion of direct and reverberation sound to greatly...
