-
Item# RA163
The Rolls RA163 is an eight channel distribution amp. It has independent volume attenuation for each channel, and 1X8(mono) or 2X4(stereo) compatibility. Balanced XLR jacks for all inputs and outputs. The RA163 also has volume knobs on the front panel and access to the stereo/mono switch.
The chassis is made of powder coated steel and uses an IEC 120V power cord, no wall wort adapter with this professional grade distribution amp. Designed for installations where you need to send...
-
Item# RA170
The Rolls RA170 Power Amplifier was designed especially for the installation contractor. The RA170 is a single rack-space, mono unit with a choice of an RCA or 1/4" unbalanced input. The 70 volt speaker outputs are provided via spring-loaded terminals - no transformer is required for speaker connection. The front panel includes a Power indicator LED, a Volume control, and two Clip LEDs which indicate circuitry overload. The output circuitry is protected from momentary shorting and...
-
Item# MP13
The Rolls MP13 is a small, simple, and inexpensive microphone pre amplifier for a variety of applications. The unit has XLR and 1/4" Outputs, XLR and 1/8" Inputs, and a single Gain control with a Clip indicator. Switchable Phantom Power is included for use with a condenser microphone. The unit comes complete with a power adapter.
Features: Small size
Works with dynamic, Phantom and Heaset mics
XLR and 3.5mm inputs
XLR and 1/4" outs
Works with 9 to 12 Vdc Specifications: Input...
-
Item# RLS-RA63B
The Rolls RA63b is an eight channel mono, or four channel stereo distribution amplifier designed for the contractor / install market. The outputs are designed to drive high-level balanced lines in a sound distribution system. The screw terminals on the rear panel are for input and output, and each output may power more than one line.
Features: Mono or Stereo Operation - mono input to eight outputs, or stereo inputs to four stereo outputs.
+20 dB Gain switch.
Screw Terminal inputs...
-
Item# DU30B
The Rolls DU30b is a microphone preamp and background music preamp. When an announcement is made into the microphone, the music is automatically "ducked" under the announcement. Then the music is brought back to it's previous level.
Features: Automatically ducks music under announcements
Perfect for restaurants and small clubs
Clean, Quiet Mic Preamp
Female XLR jack for connection to a dynamic or condenser paging microphone.
Jumper for engaging the +12 volt phantom power to...
-
Item# MA1705
The Rolls MA1705 is a single rack space mixer amplifier designed for installation applications. The unit provides a compact and efficient way to mix up to three sources such as AM/FM tuners, CD players, and video players with up to two microphones. Priority talkover is provided on Microphone One for paging, and on Source Three for a jukebox, telephone, etc. The power amplifier provides 70 Watts of power when connected to a 70 volt speaker system.
Note: This...
-
Item# MA2152
The Rolls MA2152 is a two rack space mixer amplifier designed for restaurants, schools, churches, clubs etc. The unit provides a compact and efficient way to mix up to three sources such as AM/FM tuners, CD players, and video players with up to two microphones. Priority talk over is provided on Microphone One for paging, and on Source Three for a jukebox, telephone, etc.
The power output section may be connected to 4, 8, or 16 ohm speakers, or directly connected to a 70 volt...
Our Price: $449.00
Availability: Extended Lead Time. Email, Chat or Call Us for more details.
Add to Wish List-
Item# MA2355
The Rolls MA2355 is a single rack space mixer amplifier designed for small installation applications. The unit provides a compact and efficient way to mix up to three sources such as AM/FM tuners, CD players, and video players with up to two microphones. Priority talkover is provided on Microphone One for paging, and on Source Three for a jukebox, telephone, etc. The power amplifier provides 35 Watts of power connected to 8 ohm speakers.
Please Note: The front...
Our Price: $339.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Item# PA202
The Rolls PA202 is a very compact 20 X 20 Watt high efficiency Amp with barrier strip terminals for the Balanced input and speaker outputs. The unit is perfect for small speakers in small environments. Great for in ceiling and projector applications where small size is needed along with class D low heat emitted from chassis.
Bridge or Stereo Operation:
The bridge - Stereo function of the PA202 is a way of converting the unit from two channels at 20 Watts each...
Our Price: $169.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Item# RA-2100B
The Rolls RA2100b is a stereo 100W channel RMS power amplifier in a standard 2 rack space format. It is intended for professional audio and distributed musical applications. The unit features 100 Watts per channel RMS into four ohms, 85 Watts per channel into eight ohms, and for the contractor - 70 Volts eight ohms. The unit also features MOSFET drivers in a voltage and current gain circuit and a one-second input turn-on delay. The RA2100b will drive 25 Volt speaker lines directly...
Our Price: $369.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Item# RLS-DA134
Designed for high end RCA audio distribution the Rolls DA134 is a four channel distribution amplifier. RCA and 1/8” inputs that can be switched from mono or stereo. The DA134 will distribute a mono signal to eight outputs, or a stereo signal to four stereo outputs. The outputs are designed to drive line level signals. The DA134 is the perfect distribution amp anywhere high quality sound distribution is required.
Features: Expands the output of a stereo device to multiple outputs
Can...
-
Item# RLS-ILC19
The ILC19 is an in line level control for XLR balanced signals. The unit can operate with the Female jack on the front as an input, with the Male jack on the rear being its output. It can also be used in reverse meaning that the rear Male jack can be the input, with the front Female jack being the output. The ILC19 can be used with a MIC or LINE level balanced signals.
Features: Balanced XLR Input and Output
Level Volume control
small compact size
MADE IN USA!!! This product will last.
Specifications:...
-
Item# RLS-MA252
The new MA252 is a compact class D stereo amplifier with a 4 CH. stereo mixer built in. It has 20 watts per channel @ 4 Ohms. The class D low heat design gives the MA252 the ability to be mounted in very tight applications. It will work great in ceilings by projectors, or anywhere small and heat free amplification is required. The MA252 is in an all metal chassis and weighs 1 pound. Overall dimension are 6.75" X 3.5" X 1.5". Bottom mounts are provided for permanent installations. The MA252 has an...
Our Price: $189.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Item# RLS-MA255
The new MA255 is a compact class D stereo amplifier with a 4 CH. stereo mixer built in. It has 20 watts per channel @ 4 Ohms. The class D low heat design gives the MA255 the ability to be mounted in very tight applications. It will work great in ceilings by projectors, or anywhere small and heat free amplification is required. The MA255 is built in an all metal chassis and weighs 1 pound. Overall dimension are 6.75" X 3.5" X 1.5". Bottom mounts are provided for permanent installations. The MA255...
Our Price: $189.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Item# RLS-MP222
The MP222 Studio Pro Preamp is a two channel microphone preamp. Although having many possible uses, this microphone preamp was designed for studio applications. It has a transformer balanced mic input section, and many variable options for getting your mic to sound just as you want it to when recording. It is great if you are just looking for studio quality mic processing, or any application where a high quality mic preamp is needed.
Features: Transformer Balanced Inputs
XLR Inputs and Outputs
+48...
Our Price: $169.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Item# RLS-PM60
The Rolls PM60 is an all in one Personal Monitor headphone amp with a fully functional Microphone Preamp built in. Now there is a way to have a personal monitor without the need for a dedicated mixer board with a mic preamp and microphone phantom power. The PM60 has all those features built in. The PM60 has many uses other than personal monitoring, it can be used as a stand-alone mic preamp with headphone monitoring, it can be used as a mic monitoring headphone amp for direct recording, and...
-
Item# RLS-RM316
The ROLLS RM316 Three Zone Mixer combines three microphones or XLR line level signals with three RCA line level source inputs. Each input is switch selected to output to any combination of three zone outputs. The outputs are all balanced phoenix connectors, remote volume provides each zone with the means for external remote volume control. The Microphone inputs feature selectable ducking, paging for each individual zone. The RM316 is easy for anyone to use from the front, from the...
-
Item# RLS-RM424
The Rolls RM424 Four Zone Mixer combines two paging microphones with two line level source inputs. Each input is switch selected to output to any combination of four zone outputs. The outputs are all balanced XLR connectors, Remote Volume provides each zone with the means for external volume control. The Microphone inputs feature selectable ducking for paging. Front panel speaker makes pre assignment monitoring for each channel possible with individual switching for each channel.
The...
Our Price: $290.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Item# RLS-RM85
The RM85 is an 8 channel two zone mixer. Channels 1-4 will accommodate XLR microphone or XLR line level inputs. Channels 5-8 are 1/4" inputs. All 8 channels can be sent to the two XLR outputs in three configurations; A, B or both A+B. The separate A and B outputs are XLR and either can be selected to be Line or Microphone level output. Channel 8 also has a stereo 3.5mm (1/8") input on the front of the RM85. Features: Four XLR balanced inputs with +48 V phantom power
Four stereo...
Our Price: $379.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Item# RLS-SL33B
The SL33b automatically controls the levels of commercial / consumer audio signals. Since there is no audio level standard for consumer audio, theSL33b keeps the levels maintained for a more comfortable listening environment.
-
Item# RLS-SS412
The SS412 source selector is a completely passive design with absolutely nothing added to your audio signal path. That means no power required, no electronics used and no distortion will ever be added. The chassis is made from .090" steel, meaning it is 3 times thicker than most chassis. Four pairs of RCA inputs allow for connection to all your sources, and one pair of RCA jacks to go to your amplifier. Connection of the SS412 is easy. The rear panel 1-4 RCA's connect your input...
-
Item# SS32
The Rolls SS32 is a passive stereo or mono signal switching device designed to route a single signal to three outputs one at a time, or three input signals to a single output. All Contacts are make before break.
Features: 1/8" stereo and stereo RCA's all channels
Small size 3.75" X 2.25" X 1.25"
Passive, no power needed
All Connections are direct, no added impedance Specifications: Connectors: 4 ea; 1/8" Tip-Ring-Sleeve jacks
Connectors: 4 ea; RCA stereo jacks
Switch: Triple...
