-
Connectronics
Item# NUT-CMT
4-40 thread hardware for mounting all chassis connectors in panels & plates. Box of 100 screws. Order nuts and washers separately. Use counter sunk screws for mounting connectors on front of panel. Use pan head for back panel mounting.
Features: Specifications:
-
Connectronics
Item# SCREW-38B
4-40 thread hardware for mounting all chassis connectors in panels & plates. Bag of 100 screws. Order nuts and washers separately (NUT-CMT). Use counter sunk screws for mounting connectors on front of panel.
Features: Specifications:
-
Midlite
Item# MID-212SWB
4 Colors AvailableThe 2½" breakaway wall plate screw features two different length sat which you can break the screw for use in various application depths. Save time on mounting plates to different splash board,baseboard, and wall depths. With one screw you can service 2½",2", and 1½" depths. Using a pair of pliers and your hands they break at the 1½" and 2" scribed mark. They are very easy to use.Breakaway screws also prevent installers from having to carry multiple screw lengths.
Every installer should have...
Read More
-
Connectronics
Item# SCREW-38S
4-40 thread hardware for mounting all chassis connectors in panels & plates. Bag of 100 screws. Order nuts and washers separately (NUT-CMT). Use counter sunk screws for mounting connectors on front of panel.
-
Connectronics
Item# SCREW-F12B
4-40 thread hardware for mounting all chassis connectors in panels & plates. Box of 100 screws. Order nuts and washers separately (NUT-CMT). Use counter sunk screws for mounting connectors on front of panel.
Features: Specifications:
-
Platinum Tools, Inc.
Item# PLAT-HPH32-25
The High Performance HPH32-25 J-Hooks are built with steel J-Hooks over-molded with polypropylene for an easy cable slide. The "Snap-Lock" Retainer is easy to use and re-use, firmly securing cables every time and eliminating the use of cable and Velcro ties. Each J-hook has a 2" wide base support, to prevent cable kinks. They're cULus listed, Plenum rated, RoHS compliant, and are available in 1", 2", 3", and 4" sizes, along with a variety of hardware accessories for all of your...
-
Bittree
Item# BIT-2403R
Bittree 2403R is a Replacement Mating Hardware Kit with 24 E3m (Male) Housings and 72 Epin Contacts.
Features: 24 x E3M Housings (EDAC/ELCO 90-pin male with screw)
72 x EPINWH wire holecontacts (gold-plated)
-
Connectronics
Item# SCREW-12S
4-40 thread hardware for mounting all chassis connectors in panels & plates. Bag of 100 screws. Order nuts and washers separately (NUT-CMT). Use counter sunk screws for mounting connectors on front of panel. Use pan head for back panel mounting. Perfect for Neutrik D series panel mount connectors.
Features: Specifications:
-
WindTech
Item# WT-M-6
Large knurled edge 1/4"-20 lock nut. Can be used for any video or still camera or tripod accessory. High quality aluminum, natural finish. Made In America!
Since 1976 WindTech has manufactured the highest quality American made microphone windscreens and accessories available on the market. There are more than 35 models and are available in up to 25 brilliant colors. There are a wide variety of shapes and sizes available to fit most popular microphones....
-
Neutrik Americas
Item# NL-FASTON
The NLFASTON is a Faston receptacle for tabs with 'positive lock', Tab Fit 4.75 x 0.51 mm (0.187 x 0.02 in), Equivalent to AMP, pack of 100 pcs.
Specifications: Wiresize: 0.8 - 2 mm
Wiresize: 18 - 14 AWG
Wiring: flat tabs for 3/16" (FASTON® 4.8 x 0.5 mm)
Crimp size: B-crimp acc. IEC60352-2
-
Neutrik Americas
Item# A-SCREW-1-8
Black self tapping PLASTITE* screw 2.9x1.06 tri-rondular configuration, 8 mm long, panhead. Suitable for A, AA, BA and Combo Series
*PLASTITEr is a registered trademark of SFS Unimarket.
-
-
Connectronics
Item# SCREW-12B
4-40 thread hardware for mounting all chassis connectors in panels & plates. Bag of 100 screws. Order nuts and washers separately (NUT-CMT). Use these pan head for back panel mounting. Perfect for Neutrik D series panel mount connectors.
Features: Specifications:
-
Connectronics
Item# SCREW-F12S
4-40 thread hardware for mounting all chassis connectors in panels & plates. Box of 100 screws. Order nuts and washers separately (NUT-CMT). Use counter sunk screws for mounting connectors on front of panel.
-
Unique Product Solutions
Item# BMP
3M Bumpon Protective Product. Bumpers are sometimes commonly known as Rubber Feet, Bumper Stops, Spacers, Door Buffers, Door Stops, BumponsTM, Bumper Feet, Buffers, Cabinet Feet and Protectors. Bumpon is a trademark of the 3M Company
Bumpons are used on thousands of different applications which include:
Electronics
Computers
Glass Products
Plastics
Windows
DIY
Audio
Video
Doors
Automotive
Sliding Doors
Appliances
Medical Devices
Wall Protection
Corner Protection
Office Equipment
Desktop...
-
Bittree
Item# BIT-5203R
Replacement Mating Hardware Kit 52 E3M, 156 EPIN
Replacement hardware for 52 Point E3 Patchbays. For use with 521 Series patchbays with an E3 rear interface.
-
-
Canare
Item# ISO 3X12
Canare Type 3mm X 12mm Screws for 32MD Series Patch Panels
-
-
Connectronics
Item# MGC-HWKIT
Thumbscrew mounting hardware kit for up to 10 MGC style VGA/D-Sub Connector (20 screws & 20 nuts)
-
PanaVise Products
Item# PANA-851-00
SELECT AN ADJUSTING KNUCKLE - Begin Custom Building Your Own Mount!
Features: Tilt, Turn & Rotate the camera with our Adjusting Knuckle. Includes knob and set-screw adjusting options.
Shaft screws into the adjusting knuckle. For an ultra low-profile mount, screw directly to one of our Mounting Bases!
Quality manufactured and fully adjustable: 210° Tilt, 360° Turn & 360° Rotation
Knob and tamper-resistant set-screw adjusting options included
Overall knuckle height approximately...
-
Peerless-AV
Item# PER-ACC210
Expansion Anchors for concrete applications. Not Recommended for concrete block applications.
Our Price: $8.46
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Peerless-AV
Item# PER-ACC908
This Metal Stud Wall Kit is specifically designed to provide adequate support for metal stud mounting. It mounts to one metal stud with two metal stud fasteners and togglers, and four drywall fasteners further secure the mount to the wall. Features: For use with SP730P, SA730P and SAL730P model LCD screen mounts when mounting to metal stud
Includes fasteners to attach mount to plate and plate to metal stud wall
Our Price: $32.10
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Platinum Tools, Inc.
Item# PLAT-HPH16-25
The High Performance HPH16-25 J-Hooks are built with steel J-Hooks over-molded with polypropylene for an easy cable slide. The "Snap-Lock" Retainer is easy to use and re-use, firmly securing cables every time and eliminating the use of cable and Velcro ties. Each J-hook has a 2" wide base support, to prevent cable kinks. They're cULus listed, Plenum rated, RoHS compliant, and are available in 1", 2", 3", and 4" sizes, along with a variety of hardware accessories for all of your...
-
Platinum Tools, Inc.
Item# PLAT-HPH16AC-25
The High Performance HPH16AC-25 1 inch angled J-Hook is built with a steel J-Hook over-molded with polypropylene for an easy cable slide. The "Snap-Lock" retainer is easy to use and re-use, firmly securing cables every time and eliminating the use of cable and velcro ties. Each J-hook has a 2" wide base support, to prevent cable kinks. They're cULus listed, Plenum rated, RoHS compliant, and are available with a variety of hardware accessories for all of your cable management needs.
This...
