Brainstorm Electronics DXD-16 PTP Grandmaster with GPS Merged with a Precision Reference Generator
The DXD-16 can be either a PTP Grandmaster, slave or Boundary Clock. PTP (Precision Time Protocol), defined in IEEE 1588, has been broadly adopted by manufacturers as a network synchronizing standard, which means that the DXD-16 can work in a number of systems. PTP profiles supported by the DXD-16 include AES67 and SMPTE 2059.
As a Boundary Clock, the DXD-16 can be a slave to a Grandmaster on one of its attached networks, synchronize its internal clocks to that Grandmaster, and distribute the same Grandmaster time in its role as PTP master to the remaining attached networks. Alternatively it can itself fulfill the function of Grandmaster and be PTP master on all attached networks.
The DXD-16 has four Gigabit Ethernet ports (RJ45). The different ports can be used independently or as primary and secondary pairs. Each network connector supports an electrically and logically independent network, with the Brainstrorm DXD-16 acting as a PTP timing bridge. The DXD-16 is not a network switch, and for security reasons no information flows from any network port to any other.
Customize Your Units with Universal Outputs
The DXD-16 generates 6 independent sync pulses and clocks simultaneously and routes them to the 16 BNC universal outputs. Universal Outputs offer great flexibility compared to dedicated outputs as they can be configured for any of the generated legacy reference signals. This includes all standard SD and HD video sync formats (Black Burst and HD tri-level sync), word clock and AES-3id (at rates from 32 to 384 KHz, plus all the necessary pull-up/down, including 24:25 conversions, even VSO) and 10MHz.
Accurate and Versatile Clock Generator
A high-accuracy internal crystal oscillator (TCXO) provides a very stable frequency reference (+/- 1ppm). An optional oven-controlled oscillator (OCXO) can be installed. External legacy signals can also be used as reference, such as Word Clock, AES, Video Sync (SD & HD) or a 10MHz tone. The generated outputs have extremely low jitter. The output rates are independent from the reference rate which means that any rate can be extracted from any reference such as 59.97 from 25FPS for example.
GNSS / GPS
An external GNSS/GPS receiver can be connected to the Brainstrorm DXD-16 and provide the highly accurate and stable GPS clock and Time Of Day (TOD) as an external timing source. With this function multiple DXD-16's in remote locations will be locked to each other and in phase once they are GPS referenced. Optionally, an internal GPS receiver can be installed.
When using an external reference, a second source can be connected as fallback in case of failure. If the external reference becomes unusable, the DXD-16 continues generating, locked either to the alternate source or to the internal oscillator and re-locks to the reference when it reappears. These transitions occur smoothly and gradually with no sync shock to the system.
An internal 100-240 VAC power supply is provided as is a DC input for an external 12VDC source. The unit can operate with either of these power sources and either can act as a back-up for the other with auto switch-over in the event of a failure.
The internal time-of-day clock is battery backed-up to keep it running while power is off.
Alarm and Remote
GPI inputs (3) and outputs (3) are included.
All functions and settings can be monitored and altered via a web browser.