ESE ES-103U Low Cost GPS Master Clock / Time Code Generator w/ 3 Types Of Time Code. 9 Yellow LED Digits .56 Inch

ITEM #: ES 103U MFG #: ES 103U

Primary Image
Free Shipping with $49 Minimum Order

List Price:

$1,645.00

Our Price:

$1,562.95

Availability: Ships Factory Direct, Typically in 3-10 Business Days
iAvailability Description Popup
  • Special Order Item: non-cancelable, non-returnable, non-refundable.


ES 103U - Overview

The ES-103U is a low-cost yet very accurate GPS Master Clock/Time Code Generator. The unit receives time and date information from Global Positioning System satellites and supplies this data to the user in the form of four (4) different types of time code ... IRIG-B, ASCII (RS-232C & USB), SE-TC89 and ESE-TC90. Nine amber LED displays (.55") provide a digital display of the Day of Year, Hours, Minutes and Seconds data. Two (2) One Pulse Per Second outputs and a GPS "Lock" output are also standard features. A twelve-channel receiver is employed that is capable of tracking up to twelve (12) satellites simultaneously, although reception of only one is required for time data to be output. Several options are available that allow the unit to meet most any demand required of a Master Clock or Time Code Generator.

The IRIG-B time code protocol is used in many commercial and industrial applications including military, government, and utility power for its precise time synchronization. Time information is pulse-width coded in either a BCD or binary format.

  • Features:

    • SMPTE/EBU, IRIG-B, USB, ASCII (RS-232C) & ESE Time Code Outputs.
    • GPS "Lock" indicator.
    • Automatic Or Manual Daylight Saving Time Correction
    • Leap Second Correction
    • Rugged Desk Top & Rack Mount Enclosures
    • Indoor / Outdoor Antenna With 16' Cable
    • Time Zone Offset
    • 6-Digit Or 9-Digit .56" LED Display
    • Loss Of GPS Signal Output
    • Dual 1 PPS Outputs
    • Optional DC Operation for Field and Ground Mobile Applications
      Options available.
    • 10nS:10nS Accuracy: The accuracy of the unit is improved to 10nS.
    • 6-Digit: Six-Digit Display: A 6-Digit (Hr, Min & Sec) Front Panel Mounted Display. Option 'P' is required.
    • 9-Digit:Nine-Digit Display: A 9-Digit (Days, Hr, Min & Sec) Front Panel Mounted Display (.55" LED) is provided. Option 'P' is required.
    • Ant: GPS Antenna: High Performance GPS Antenna for harsh RF Environments.
    • B: Parallel BCD Output: CMOS compatible, 5-volt logic in parallel four-line format. Specify the ES-169B.
    • BBU: Battery Back-Up: An internal Gel-Cell battery is provided capable of maintaining the unit's microprocessor for up to a 4-hour power outage.
    • DC: DC Operation: Requires the unit to be powered from a DC source exclusively, typically +12 to +35 VDC.
    • EBU: EBU Time Code: The unit is configured to output EBU Time Code instead of SMPTE (standard, or at no charge on many units).
    • HR: Relay Contact Closure: A contact closure occurs at the top of each Hour. Hour and 1/2 Hour closure may be ordered on some products. Relay contacts are rated at 10-Watts maximum load, 500mA maximum switching current.
    • IRIG-B: IRIG-B Output: IRIG-B Time Code Output. IRIG-E cannot be specified when this option is ordered.
    • IRIG-E: IRIG-E Output: IRIG-E Time Code Output. IRIG-B cannot be specified when this option is ordered.
    • J: 220 VAC/50 Hz Operation: The unit is configured to operate from 220 VAC line voltage. 117 VAC 50/60 Hz is standard. EBU and/or PAL may also be specified, if needed.
    • K: provides a 10 MHz output and a 1 KHz output. Options '10ns' and 'P' are required if option 'K' is specified.
    • P: 19" Front Panel (Rack Mount): Designed for mounting into a standard equipment rack. Panel is 1/8" black anodized Aluminum and chassis is 5" - 10" deep.
    • P2: Dual Rack Mount: Allows specific units to be mounted side-by-side on a single Rack Mount panel.
    • SMPTE/EBU: SMPTE or EBU Time Code outputs: SMPTE or EBU Time Code outputs may be specified (not available with IRIG).
     
  • Specifications:

    • Electrical: 117 VAC, 50/60 Hz
    • Power: 15 Watts Typical
    • Enclosure: Rack Mount
    • Mechanical: 1.75" H x 19" W x 10" D
    • Displays: Nine Digits, Yellow LED, .56" High
    • Accuracy: 1 PPS @ <500nS
    • Drift: 33mS/day (if no GPS signal)
    • Outputs: ESE-TC89: drives 100 Slaves @ 4000', ESE-TC90: drives100 Slaves @ 4000', 1 PPS: TTL, 20% Duty Cycle, 1 PPS: TTL, 50% Duty Cycle,.RS-232C: Date & Time Output, USB: Universal Serial Bus, Date & Time Output.
    • IRIG-B: 3 Vpp(mark amplitude)600 Ohm,
    • RS-232C: Date & Time Output
    • USB: Universal Serial Bus, Date & Time Output
    • GPS Receiver: Internal 12-Channel.
    • Antenna: Indoor/Outdoor with 16' Cable.
    • Options: Ant, BBU, DC, HR, J, K, UL, 10nS
     
  • ES-103U Options

    :

    • (10nS) 10nS Accuracy: The accuracy of the unit is improved to 10nS.
    • (Ant) GPS Antenna: High Performance GPS Antenna for harsh RF Environments.
    • (B) Parallel BCD Output: CMOS compatible, 5-volt logic in parallel four-line format. Specify the ES-169B.
    • BBU Battery Back-Up: An internal Gel-Cell battery is provided capable of maintaining the unit's microprocessor for up to a 4-hour power outage.
    • Clear Clear Anodized Front Panel
    • DC DC Operation: Requires the unit to be powered from a DC source exclusively, typically +12 to +35 VDC.
    • (HR) Relay Closure: Option "HR" provides a user programmable relay contact closure. The standard contact closure occurs on the Hour and Half Hour. If contact closures at other times are desired, the user can program up to four relay closures using the PC Software, which can be downloaded from the ESE web site. The reed relay is rated at 10 watts maximum resistive load (500 mA switching current) and is intended for control applications only. The relay contacts are accessible on the DB-9 connector.
    • (J) 220 VAC/50 Hz Operation: The unit is configured to operate from 220 VAC line voltage. 117 VAC 50/60 Hz is standard.
    • (K) provides a 10 MHz output and a 1 KHz output. Option '10ns' is required if option 'K' is specified. UL "UL" Approved Power Supply: The unit is supplied with a UL/CSA approved wall mount power supply.
     

ES 103U - Required Accessories

    California Residents:
    WARNING:
    Cancer and Reproductive Harm - www.P65Warnings.ca.gov