Lectrosonics DNT0212 Dante Interface - 2 Inputs / 12 Outputs

ITEM #: LEC-DNT0212 MFG #: DNT0212

Primary Image
  • Product Image Thumbnail 1 of 2
  • Product Image Thumbnail 2 of 2
Free Shipping with $49 Minimum Order

List Price:

$4,817.00

Our Price:

$3,613.00

Availability: Ships Factory Direct, Typically in 3-10 Business Days
iAvailability Description Popup


    DNT0212 - Overview

    Lectrosonics DNT0212 processor subscribes to channels on a Dante network and delivers them to an internal digital matrix for automatic mixing and processing, and to Dante network transmit channels. In addition, two analog line level inputs are provided for use with local sources audio sources such as voice evacuation announcements.

    The outputs of the matrix can be assigned to a Dante transmit channel, an analog output and/or routed back to an input to be further mixed and processed with another input channel or matrix mix.

    The DNT0212 is at home in sound reinforcement and conference systems, room combining, courtrooms, council chambers, house of worship systems and numerous other multi channel sound systems. High quality microphone preamps and A-D converters provide studio quality audio for court recording and telepresence systems. Delay, EQ filters and dynamic processing is present on every output channel. Smooth gain transition is enabled on every input and output channel, and every crosspoint, to prevent audible artifacts caused by abrupt level changes.

    Signal routing options are extremely flexible. Each output channel can select signals from the Dante network, external analog sources, output mixes from the internal matrix and the internal signal generators. Each of the 48 automatic mixers in the internal matrix crosspoints can mix signals from any or all of the 34 input channels and the four signal generators.

    • Features:

      • 32 inputs from Dante™ receive channels
      • 2 analog line level inputs
      • 16 outputs to Dante™ transmit channels
      • 8 line level analog outputs
      • 4 mic/line level analog outputs
      • Supports both switched and redundant modes in DanteTM operation
      • Post-mixing signal processing on all inputs (analog and digital)
      • 48 independent automatic mixers with 38 inputs per mixer and channel activity detectors
      • Support for multi-level mixing: mixes can be looped back and used as mixer inputs
      • Extensive signal processing including filters, delay and channel linking for dynamic processing (compressors, limiters)
      • Gain smoothing to prevent transient noise during instantaneous level changes
      • Four test signal generators available for system setup and testing
      • Extensive macro command language
      • Control interfaces via USB, RS-232, Ethernet and programmable logic I/O
      • Rack mount or under table mount
       
    • Specifications:

      • Audio Input Channels
      • Digital: 32 Dante channels
      • Analog: 2 line level analog (for paging); gain -20 dB to +20, dB; 15k ohm differential; 3.75k ohm common
      • Max. analog input level: 20 dBu
      • Dynamic range: 102 dB
      • THD + noise: 0.01%
      • A-D Sampling Rate: 48 kHz; fixed
        *Balanced mic/line level inputs with digitally programmable gain may be configured as unbalanced inputs.

        Audio Outputs
      • Digital: 16 Dante transmit channels
      • Analog: 12 channels; 0 dBu nominal; < 50 ohm source to drive 600 ohm min. load; channels 9 - 12 include 20 dB and 40 dB attenuators

        Dante Interface
      • Supported sampling rate: 48 kHz
      • Data rate LED: 100Mbps/1Gbps
      • Activity LED: Blinks when active
      • Modes of operation: Switched mode using either connector; redundant mode with primary and secondary networks using both connectors
      • Network Connectivity: Dante interface and Ethernet control can be connected to the same network
        *The interface provides dual RJ-45 connectors on the rear panel and an Ethernet switch built into the processor.

        Network Connectivity
      • Dante interface and Ethernet control can be connected to the same network

        Filters
      • All filters have zero processing delay
      • EQ stages: 4 per input channe

        Internal Signal Generator
      • Swept sine: Modes: single sweep, continuous sweep
      • Waveforms: sawtooth (up or down), triangle
      • Sweep rate: linear, logarithmic
      • Parameters: start freq, stop freq, level [dBu], sweep
      • White noise parameter: Level [dBu]
      • Pink noise parameter: Level [dBu]
      • Tone (sine wave) parameters: Level [dBu], frequency

        Filter Types
      • Low Pass: Butterworth (6, 12, 18, 24 dB/octave), Bessel (6, 12, 18, 24 dB/octave), Linkwitz-Riley (12, 24 dB/octave), Additional parameters: frequency [Hz]
      • High Pass: Butterworth (6, 12, 18, 24 dB/octave), Bessel (6, 12, 18, 24 dB/octave), Linkwitz-Riley (12, 24 dB/octave), Additional parameters: frequency [Hz]
      • Low Shelving: Butterworth (6, 12, 18, 24 dB/octave), Bessel (6, 12, 18, 24 dB/octave), Additional parameters: frequency [Hz], boost/cut [dB]
      • High Shelving: Butterworth (6, 12, 18, 24 dB/octave), Bessel (6, 12, 18, 24 dB/octave), Additional parameters: frequency [Hz], boost/cut [dB]
      • Peaking EQ (parametric): Parameters: frequency [Hz], bandwidth [octave], boost/cut [dB]

        Compressor
      • Soft knee with RMS level detector eliminates need for separate attack and delay settings; 0.1, ms increments, 1 second max.; continuously adjustable ratio

      • Power Requirements: 100-240 VAC, 50/60 Hz
      • Power Consumption: 20 W maximum
      • Dimensions: 1.75 x 19.00 x 7.70 inches
      • Weight: 5.32 lbs., 1.7 kg.
       
    • Item Includes:

      • 1x Power Cord (Part #21499)
      • 1x 25-pin Connector (Part #21558)
      • 7x 5-position Plug (Part #21580)
      • 1x USB Cable (Part #21713)
      • 1x Adjustment Tool (Part #35679)
      • 1x DNT Software CD
      • 1x Manual
       

    DNT0212 - Required Accessories

      California Residents:
      WARNING:
      Cancer and Reproductive Harm - www.P65Warnings.ca.gov