-
Item# CB-BBG-DE-AA
BlueBox offers excellent performance, and excels to a new level of ease of use and installation practicality. The Cobalt BBG-DE-AA BlueBox 3G/HD/SD Analog Audio De-Embedder provides de-embedding to professional balanced audio at 0 dBFS to pro 24 dBu levels using full 24-bit conversion.
De-embed selection can be configured using the device DIP switches or by using an intuitive GUI application that communicates with BBG-DE-AA over a PC's USB port. The GUI app allows dynamic configuration...

-
Item# CB-9910DA2Q3GRCK
The Cobalt™ 9910DA-2Q-3G-RCK 3G/HD/SD/ASI Dual-Channel Multi-Rate Reclocking DA with x4 Output Crosspoints supports two input channels which can be crosspoint-routed to any of 16 DA outputs. The 9910DA-2Q-3G-RCK is multi-rate with user enable/disable reclocking, and supports SDI and ASI/DVB on all inputs and outputs with non-inverting outputs.
The extremely flexible crosspoint (which is user-configurable via DashBoard™ GUI remote control) allows dual 1x8 or single...

Our Price: $845.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# CB-9904-UDX-4K
The Cobalt Digital 9904-UDX-4K UHD Up/Down/Cross Converter/Frame Sync/Embed/De-Embed Audio Processor is Cobalt's next generation of advanced scaler/frame synchronizers for the openGear platform.
The 9904-UDX-4K upconverts 12G/6G/3G/HD/SD to either UHD1 3840x2160 Square DIvision Multiplex (SDM) or Two-Sample Interleave (2SI) quad 3G-SDI based formats, or can output ST 2082 12G-SDI for single-wire 4K transport. With both 12G-SDI and quad 3G-SDI inputs, the 9904-UDX-4K can downconvert...

-
Item# CB-9926-4HTOS
The 9926-4HtoS 3G/HD/SD Quad-Channel openGear® HDMI-To-SDI Converter with Per-Channel Frame Sync provides four independent paths of true 3G and HD conversions from HDMI to SMPTE 424M, 292M, or 259M. Each channel is equipped with full independent frame sync as well as full input and output audio crosspoints. Input and output HDMI and SDI crosspoints allow program sourcing and distribution across any of the four HDMI inputs and four SDI outputs.
In existing openGear® installations,...

-
Item# CB-9910DA-AV
The Cobalt 9910DA-AV Analog Video Distribution Amplifier is perfect for use as a black burst and tri-level reference DA. It provides 1x8 distribution with one analog input and eight 75Ω analog outputs. Card jumpers allow setting the input as differential (floating ground) or single-ended, and Hi-Z looping input or on-card 75Ω terminated. A trim control located on the front of the card allows gain control. The card can be accessed using DashBoard remote control for status monitoring.
...

-
Item# CB-BBG-EM-AA
BlueBox offers excellent performance, and excels to a new level of ease of use and installation practicality. The Cobalt BBG-EM BlueBox 3G/HD/SD Analog Audio Embedder provides embedding from professional balanced audio at pro 24 dBu to 0 dBFS to levels using full 24-bit conversion.
Embed selection can be configured using the device DIP switches or by using an intuitive GUI application that communicates with BBG-EM-AA over a PC's USB port. The GUI app allows dynamic configuration control,...

-
Item# CB-9910DA-AV-EQ
The Cobalt 9910DA-AV-EQ Analog Video Distribution Amplifier with EQ provides 1x8 distribution with one analog input and eight 75Ω analog outputs. Card jumpers allow setting the input as differential (floating ground) or single-ended, AC or DC coupled, and Hi-Z looping input or on-card 75Ω terminated. Trim controls located on the front of the card allow EQ adjustment and gain control. The card can be accessed using DashBoard remote control for status monitoring.
Please note!...

-
Item# CB-9922-FS
The Cobalt® 9922-FS 3G/HD/SD-SDI Frame Sync with Audio/Video Processing, AES/Analog Audio Embedding/De-Embedding, and CVBS I/O offers frame sync, and advanced audio and ancillary data support, plus many other powerful features. Frame sync can select from multiple reference inputs, with failover to alternate selected sources. Full audio support includes per-channel audio delay. Option +2FS adds a second independent processing path, offering two signal paths on a single openGear® card, with...

-
Item# CB-RM20-9910-AVB
Cobalt Digital RM20-9910AV-B Rear I/O Module for CB-9910DA-AV-EQ openGear card.
Please note! Rear module only! Card is required for proper integration.
Features: Analog Video In
(1) Loop Output
(8) Analog Video Out
(All coaxial connectors BNC)

-
Item# CB-BBGDA-12G-1X6
The BBG-DA-12G-1x6 by Cobalt is a 12G/3G/HD/SD-SDI / ASI / MADI multi-rate distribution amplifier that features an input status LED. The unit is fully automatic and supports SMPTE 2082-1 (12G), 424M (3G), 292M and 259M SDI video signals as well as ASI and MADI, and is equipped with 1 input and 6 reclocked SDI outputs. (Reclocking for 12G/3G/HD/SD-SDI and MADI inputs; all other bit rates are non-reclocking.) The unit supports 1x3 ASI distribution using its non-inverting outputs.
Please...

-
Item# CB-9910DA-4Q-3G
The all-new Cobalt 9910DA-4Q-3G-RCK 3G/HD/SD Quad-Channel Multi-Rate Reclocking DA with x4 Output Crosspoint supports four input channels which can be crosspoint-routed to any of 16 DA outputs. The 9910DA-4Q-3G-RCK is multi-rate with user enable/disable reclocking, and supports SDI and ASI/DVB on all inputs and outputs with non-inverting outputs. The quad-input capacity provides a one-card solution for distribution of 4K quadrant-division content over 3G/HD/SD-SDI interfaces.
The extremely flexible...

Our Price: $1,119.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# CB-SCTE104-FAST
Option +SCTE104-FAST (Frame-Accurate SCTE Trigger) provides functionality available only from Cobalt in the openGear form factor. This software option meets the need to frame-accurately mark the start and stop points of content. Cobalt engineers worked closely with key customers to develop +SCTE104-FAST, providing the unique ability to tie time-stamped information from automation systems to the timecode information contained in the baseband SDI. +SCTE104-FAST provides frame-accurate insertion...

Our Price: $1,445.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# CB-9913DAAES75RG
The Cobalt Digital 9913DA-AES75-RG 75-Ohm (Unbalanced) AES Distribution Amplifier with Remote Gain Control is a broadcast-quality AES distribution amplifier that provides up to eight copies of the input AES-3id signal. A transformer-coupled input helps prevent ground loop and other grounding-related problems.
The 9913DA-AES75-RG supports audio sampling frequencies from 32kHz to 96kHz. Cable equalization and re-clocking techniques enable the 9913DA-AES75-RG to recover the incoming digital...

Our Price: $640.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# CB-PS-9000
The PS-9000 can be used as a redundant power supply or standard power supply for the HPF-9000 high power frame.

Our Price: $599.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# CB-9933-EMDEADDA
The all-new Cobalt® 9933-EMDE-ADDA 3G/HD/SD-SDI 16-Channel AES / 8-Channel Analog Audio Embedder / De-Embedder offers full-flexibility AES and analog audio embedding/de-embedding in a basic, economical, high-efficiency openGear® card.
The 9933-EMDE-ADDA provides full 16-channel embed / de-embed between AES, 8-channel analog audio, and all four groups of embedded audio. Audio embed adaptive SRC allows asynchronous 48 kHz AES audio to automatically sync with program video...

-
Item# CB-RM209971DHDBN
Cobalt Digital RM20-9971-D-HDBNC Rear I/O Module for 9971-MV18 openGear Cards.
Please Note! Rear Module only! Card is required for proper integration.
Specifications: (18) PiP Video SDI In
(4) SDI Out
(2) HDMI Out
COMM/GPIO
100/1000 BaseT Ethernet Control Port
(All coaxial connectors HD-BNC)

-
Item# CB-RM20-9910-2QA
The Cobalt Digital RM20-9910-2Q-A is a rear module for the Cobalt 9910DA-2Q-3G-RCK openGear card! This module is a 20-Slot Frame Rear I/O Module (Standard Width) (2) 3G/HD/SD-SDI/ASI Input BNC, (8) 3G/HD/SD-SDI/ASI Output BNCs.
Please Note: Rear I/O Module output designations here correlate to output numbers for four DA quadrants as shown in the card block diagram. As such, SDI outputs within a quadrant group can only be sourced from a particular input at one time (for example,...

Our Price: $128.40
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# CB-9910DA-2Q-3G
The Cobalt® 9910DA-2Q-3G 3G/HD/SD/ASI Dual-Channel Multi-Rate DA with x4 Output Crosspoint (Non-Reclocking) supports two input channels which can be crosspoint-routed to any of 16 DA outputs. The 9910DA-2Q-3G is multi-rate and supports SDI and ASI/DVB on all inputs and outputs with non-inverting outputs.
The extremely flexible crosspoint (which is user-configurable via DashBoard™ GUI remote control) allows dual 1x8 or single 1x16 routing possibilities. Any of the two input channels...

Our Price: $635.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# CB-BBG-EO-MK2-LC
The Blue Box BBG-EO-MK2 Coax-to-Fiber throw-down converter unit is a new part of the BlueBox group of compact, rugged, and portable converter boxes. Super-easy to use, Blue Box BBG-EO-MK2 supports SMPTE 424M, 292M, and 259M as well as ASI and MADI audio. Auto-mode EQ/reclocking automatically sets to the signal type being received while allowing unrecognized formats to be safely passed without reclocking (auto-reclock can also be manually disabled). Its wide operating range (from 5Mbps to...

Our Price: $595.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# CB-BBG-OE-MK2LC
The Blue Box BBG-OE-MK2 Fiber-To-Coax throw-down converter unit is a part of the Blue Box GroupT of compact, rugged, and portable converter boxes. Super-easy to use, BBG-OE-MK2 supports SMPTE 424M, 292M, and 259M as well as ASI and MADI audio. Auto-mode EQ/reclocking automatically sets to the signal type being received while allowing unrecognized formats to be safely passed without reclocking (auto-reclock can also be manually disabled). Its wide operating range (from 5Mbps to 3Gbps) flexibly supports...

Our Price: $594.95
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# CB-RM20-9910-2QE
The Cobalt Digital RM20-9910-2Q-E is a rear module for the Cobalt 9910DA-2Q-3G-RCK openGear card! Module is a 20-Slot Frame Rear I/O Module (Double Width) (2) 3G/HD/SD-SDI/ASI Input BNC, (16) 3G/HD/SD-SDI/ASI Output BNCs.
Please Note: Rear I/O Module output designations here correlate to output numbers for four DA quadrants as shown in the card block diagram. As such, SDI outputs within a quadrant group can only be sourced from a particular input at one time (for example, if the...

Our Price: $179.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# CB-BGDA12G1X6PS5
The Cobalt BBG-DA-12G-1x6-PS5 a 12G/6G/3G/HD/SD-SDI / ASI / MADI multi-rate distribution amplifier that features an input status LED. The unit is fully automatic and supports SMPTE 2082-1 (12G), 424M (3G), 292M and 259M SDI video signals as well as ASI and MADI, and is equipped with one input and six reclocked SDI outputs. (Reclocking for 12G/6G/3G/HD/SD-SDI and MADI inputs; all other bit rates are non-reclocking.) The unit supports 1x4 ASI distribution using its non-inverting outputs.
The...

-
Item# CB-RM209913DA75A
Cobalt Digital RM20-9913DA75-A is a 20-Slot Frame Rear I/O Module for 9913DA75. Each module occupies two slots and accommodates one card. This rear module provides one AES input and eight AES outputs.
Features: (1) AES Audio In (AES IN)
(8) AES Audio Out (AES OUT 1 thru AES OUT 8

Our Price: $234.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# CB-RM20-9910-4QE
Rear I/O module for the 9910DA-4Q-3G-RCK (4 SDI in and 16 SDI out).

Our Price: $182.44
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# CB-RM20-9926-B
The Cobalt RM20-9926-B-HDBNC is a 20 Slot Frame Rear I/O Module (Standard Width) with HDMI Inputs, SDI Outputs for the 9926 version openGear cards.
Note: Due to the alignment of the 9926-2HtoS card and this rear module, the combination of the card and rear module will consume the adjacent even frame slot in addition to the odd slot occupied by the card.
Note: Mates to card in odd slot.
Connectors are HDBNC and Mini-HDMI.
Specifications:...
