-
Item# RFV-OPTIX1-S3-US
2 Channels AvailableRF Venue's OPTIX Series 3 (OPTIX1-S3-US) is a single channel high-performance RF over fiber optic (RFoF) conversion system designed to facilitate the remote placement of wireless audio antennas over long distances. The OPTIX Transmitter module converts RF signals arriving from an antenna into a single mode optical signal, sending that signal down a length of fiber-optic cable to the OPTIX Receiver module which converts the source signal back into RF.
Without any signal loss over the optical...
Read More
-
Item# RFV-COMBINE4
The COMBINE4 IEM transmitter combiner brings together up to four in-ear monitor transmitter signals into a single rear panel mounted antenna connector. Any brand IEM may be used, as well as any type of directional antenna. It also provides DC power to up to four IEM transmitters to reduce cable clutter and wall warts. IEM transmitter combination is important for multi-channel systems to minimize intermodulation products arising from multiple adjacent transmitters interfering with...

-
Item# RFV-DFINBDISTRO4
The DFINBDISTRO4 from RF Venue is a bundled package containing the DISTRO4 4 Channel Antenna Distributor and the Diversity Fin Black install antenna.
The DISTRO4 distributes diversity RF and DC power across four wireless microphone receivers of any brand. A true "distribution amplifier", DISTRO4 splits signals from two antennas (or one Diversity Fin) connected to the rear panel and amplifies them before delivering the signals to...

-
Item# RFV-RFEXP-PA
The RF Venue RFEXP-PA RF Explorer Pro Audio Edition is a portable RF spectrum analyzer designed specifically for use with wireless microphones and in-ear monitor systems. The RF Explorer Pro Audio Edition is the perfect addition to any audio pro's toolkit. With a 50 ohm BNC input connector designed to interface directly with wireless audio systems and accessories such as remote antennas, antenna distribution systems, or RF over fiber modules, the Pro Audio Edition spectrum analyzer is the...

-
Item# RFV-ILAMP-ACT
The RF Venue ILAMP-ACT is an in-line amplifier designed to compensate for RF antenna signal loss on long coax runs.
One ILAMP-ACT provides 10 dB of gain, enough to compensate for 66' of RG-58 cable. For longer runs, up to two in-line amps can be cascaded using either a BNC female to BNC female adapter or a coax jumper cable (both available separately).
The unit can be powered via the antenna power output from an antenna distributor or a receiver, or using the included AC adapter. A...

-
Item# RFV-24BEAM
Inspired by the popular UHF CP Beam antenna, the RF Venue 24BEAM lightweight, miniaturized version is built for maximum gain in the 2.4 GHz band. Painstakingly designed and tested in their laboratory, it provides significant performance improvements over other 2.4 GHz directional antennas intended for networking devices-antennas that make many compromises.
The 2.4 GHz CP Beam is well-suited for use with Line 6® digital wireless microphones, ClearCom® Tempest intercoms, and Zaxcom®...

-
Item# RFV-2X1SPLIT
The RF Venue 2x1SPLIT is a passive 2X1 RF Signal Splitter/Combiner with BNC female connectors intended for use with wireless audio systems. It is compatible with all major brands of wireless microphones and in-ear monitors.
Features: One BNC antenna in and two BNC out, or two BNC antennas in and one BNC out.
R1 channel passes 12VDC if DC over coax is provided.
Specifications: Electrical
RF Carrier Frequency Range: 10-1,000 MHz
VSWR: 1:2
Impedance: 50Ω
Isolation:...
-
Item# RFV-4ZONE
The 4 ZONE antenna combiner takes the complexity out of multi-zone wireless microphone projects. 4 ZONE combines together up to four separate pairs of diversity antenna connections for multi-purpose rooms, indoor-outdoor configurations, or main stages with secondary breakout rooms.
For fine tuning RF levels in each coverage area, 4 ZONE provides individual channel RF signal attenuation control down to -31dB in 1 dB steps. And for active antennas or in-line amplifiers, it features...

-
Item# RFV-BPF530T590
The RF Venue BPF530T590 band-pass filter helps eliminate "out of band" signals that can saturate the front end of wireless microphone receivers and can greatly improve dynamic range by reducing noise and third party interference outside the range of operation.
Featuring industry standard BNC connectors and a small 3" x 1.75" footprint, these hand-tuned band-pass filters require no power or user configuration and can be easily connected in-line with wireless microphone antennas to reduce...

-
Item# RFV-COMB4CPB
The COMB4CPBfrom RF Venue is a bundled package containing the COMBINE4 Signal Combiner and the CP Beam Antenna.
The COMBINE4 transmitter combiner brings together up to four in-ear monitor transmitter signals into a single front panel mounted antenna connector. Any brand IEM may be used, as well as any type of directional antenna. It also provides DC power to up to four IEM transmitters to reduce cable clutter and wallwarts. IEM...

-
Item# RFV-COMB8CPB
Introducing the COMB8CPB IEM Performer's Pack from RF Venue. A complete system, engineered to work together to combine up to 8 IEM transmitters of any brand into a single helical antenna. The CP Beam helical antenna also steps up an IEM system's transmitting power by nearly 8X, focusing the signal directly on your performers and not scattering the signal where it isn't needed. This allows you to use the lowest possible setting of your transmitter's output power which greatly reduces intermodulation...

-
Item# RFV-COMBINE8
The RF Venue COMBINE8 IEM combiner brings together up to eight in-ear monitor transmitter signals into a single rear panel mounted antenna connector.
Any brand IEM set to transmit 50 mW or less may be used, as well as any type of directional antenna. It also provides DC power to up to 8 IEM transmitters with an external power supply, removing the need for wall warts.
IEM transmitter combination is important for multi-channel systems to minimize intermodulation artifacts arising from...

-
Item# RFV-CPBEAM
The CP Beam is designed for touring sound professionals, sports broadcast engineers, and those who frequently operate many hundreds of feet away from the action. Long range FOH positions often require a high gain antenna for microphone or in-ear monitor links.
Unlike expensive, bulky helical antennas, the circular polarized CP BEam is lightweight, rapidly deployed and easily stored. The durable, water resistant nylon cover compresses down and buckles close to fit inside a rack drawer. When needed,...

-
Item# RFV-CX-22
Architect-Approved Antenna for UHF Mics
The CX-22 Antenna is an unobtrusive, near field antenna system designed to work with wireless microphones. It attaches easily to any standard 2' x 2' ceiling tile with the included hardware kit and blends in easily to any boardroom, classroom, or other drop-ceiling environment. Available with an optional junction box and in custom color-matched paint, the CX-22 Antenna has similar interference-mitigation characteristics to RFvenue's RF Spotlight, but in...

-
Item# RFV-D-OMNI
The Diversity Omni also offers greater flexibility in antenna placement, since only one is needed in place of two separate antennas. Its weather resistant design allows it to be mounted outdoors by installing simple protection for the connectors and the provided cordura nylon cover.
The Diversity Omni Antenna is perfectly suited for indoor multi-zone projects or outdoors where large areas of coverage are needed, such as sports venues, theme parks, and amphitheaters.
To connect the Diversity...

-
Item# RFV-DFIN
The Diversity Fin Antenna is the flagship RF Venue wireless microphone antenna; it's portable, simple to operate, and capable of pushing diversity microphone systems to the limits of their performance while excelling in tough RF environments.
The Diversity Fin reduces microphone drop-outs and interference in a novel and remarkably simple way; instead of using two antennas of the same orientation spaced a distance apart, as with standard whip or paired LPDA "shark fin" antennas, it includes one...

-
Item# RFV-DFINB
The patented Diversity Fin™ is a multi-purpose antenna for wireless microphones that reduces dropouts using a cross-polarized, hybrid design. It combines one LPDA and one dipole antenna in an orthogonal (right angle) configuration. One element captures vertically polarized waves, and the other horizontally polarized waves-doing the same job as two "shark fin" paddles while greatly improving RF and audio performance.
To use, just connect both the A and B outputs on any antenna distributor...

-
Item# RFV-DFINBD9
The RF Venue DFINBD9 represents a unique approach to high quality RF signal distribution for wireless microphones. A new and proprietary design eliminates old internal splitters most antenna distribution systems still use and replaces them with state of the art "divide by three" circuitry, providing up to 9 low-noise channels of diversity wireless. And each output is clean: DISTRO9 HDR employs low noise figure amplifiers and superior gain structure providing over 60 dB of dynamic range...

-
Item# RFV-DFINDISTRO4
2 Color AvailableThe RF Venue DISTRO4 distributes diversity RF and DC power across four wireless microphone receivers of any brand. A true "distribution amplifier," DISTRO4 splits signals from two antennas (or one Diversity Fin) connected to the rear panel and amplifies them before delivering the signals to multiple receivers in a rack. An additional cascade port is included for daisy chaining multiple units together to accommodate up to 16 receivers per antenna pair.
DISTRO4 features a 2000 mA internal...
Read More
-
Item# RFV-DFINWD9
The RF Venue DFINWD9 represents a unique approach to high quality RF signal distribution for wireless microphones. A new and proprietary design eliminates old internal splitters most antenna distribution systems still use and replaces them with state of the art "divide by three" circuitry, providing up to 9 low-noise channels of diversity wireless. And each output is clean: DISTRO9 HDR employs low noise figure amplifiers and superior gain structure providing over 60 dB of dynamic range...

-
Item# RFV-DISTRO4
DISTRO4 is a broadband UHF antenna distribution amplifier that routes antenna signals from a pair of diversity antennas to several receivers in a multichannel system. DISTRO4 compensates for signal strength lost in the splitting process with high quality amplifiers. Two or more units may be cascaded together to accommodate more than four receivers with the included cascade port.
DISTRO4 features a 2000 mA internal power supply (no wall wart) and compares to antenna distributors...

-
Item# RFV-DISTRO9HDR
The RF Venue DISTRO9HDR represents a unique approach to high quality RF signal distribution for wireless microphones. A new and proprietary design eliminates old internal splitters most antenna distribution systems still use and replaces them with state of the art "divide by three" circuitry, providing up to 9 low-noise channels of diversity wireless. And each output is clean: DISTRO9 HDR employs low noise figure amplifiers and superior gain structure providing over 60 dB of dynamic range...

Our Price: $1,799.00
Availability: Extended Lead Time. Email, Chat or Call Us for more details.
Add to Wish List
-
Item# RFV-DIVERSITYFIN
For the best results, typical "paddle" antennas require that you set up two units spaced apart at a distance dependent on the frequency at which your wireless microphone is transmitting. Figuring out the proper placement and configuration of remote antennas onsite is a pain, especially when you have no room for multiple stands, and when incorrect placement results in bad audio. Instead of setting up two paddles, setup just one Diversity Fin and get reliable diversity reception without the configuration...

-
-
Item# RFV-RFSPOTLIGHT
The RF Spotlight™ is an innovative, patent pending UHF antenna design that excels in applications where wireless microphones will be used in a limited area. With one or more RF Spotlight units in the area of use, the user can create a local RF field- similar in effect to a soft spotlight in a dark theater. By intentionally designing the unit for reduced signal sensitivity yet a uniform, omnidirectional pickup pattern, the RF Spotlight can be within very close range of the transmitting handheld microphone...
