Neutrik NA2-IO-DLINE Bi-Directional DANTE Audio Interface With Balanced XLR and Ethernet Connections

ITEM #: NA2-IO-DLINE MFG #: NA2-IO-DLINE

Primary Image
  • Product Image Thumbnail 1 of 3
  • Product Image Thumbnail 2 of 3
  • Product Image Thumbnail 3 of 3

This item is no longer available.
Ask a Markertek Expert if you need assistance finding an appropriate substitute.

(800) 522-2025Email

Items similar to the NA2-IO-DLINE

NA2-IO-DLINE - Overview

Connect your legacy audio gear to the Dante® world. The NA2-IO-DLINE is an end-of-network device. It is a breakout box which allows two channels of audio to be integrated into a Dante® network. Simultaneously, NA2-IO-DLINE converts a Dante® stream into analog audio signals. Hence, it is possible to use this tiny box to feed analog audio signals into the Dante® network while at the same time receiving a mix from another Dante® source.

NeutrikNA2-IO-DLINE is designed for harsh stage conditions. It therefore features lockable chassis connectors for both the audio and network connections. For fixed installations, the rubber protection can be removed. With optional mounting brackets or a rack panel, the box can be mounted below tables, in floor boxes, or in equipment racks.

Please note!
The Dante adapter can be connected to a Dante network via a standard 100 Mb/s twisted-pair Ethernet cable (CAT5e). This individual connection is responsible for the data transfer as well as for the power supply. Depending on the cable length and shield, we do not recommend installing cables parallel to power supply lines.

  • Features:

    • Connect analog audio equipment to a Dante® network
    • Heavy duty adapter for rugged stage conditions
    • Lockable audio and network connections
    • Convert up to two analog line signals to a Dante® network
    • Feed non Dante® ready amplifiers, speakers or mixing desks with signals from the Dante® network
    • Requires a Power over Ethernet switch or a PoE injector (802.3 af/at; class 1)
    • AES67 compliant
    • Rack mountable
     
  • Specifications:

    • Dante™ specifications
    • Channels: 2 INPUTS (line level), 2 OUTPUTS (line level)
    • Supported sampling rates: 44.1 / 48 / 88.2 / 96 kHz
    • Bit depth: 16, 24 and 32 Bit
    • Latency: Depending on the network configuration, 1 ms (standard)
    • Ethernet connection: 100BASE-TX (PoE support)

      Electrical specifications
    • Power consumption: < 2 watts
    • Power supply: PoE switch (Power over Ethernet) or
    • PoE injector (according to IEEE 802.3af/at, class 1)

      Analog audio input
    • Input impedance 6.6 kOhm
    • Input level (balanced) Max. 22 dBu
    • Frequency response 20 Hz to 20 kHz (+/-0.5 dB)
    • Dynamic range > 100 dB
    • Signal-to-noise ratio > 100 dB
    • THD + noise: < 0.01 % @ + 4 dBu, A-weighting
    • Crosstalk < -80 dB @ 20 kHz

      Analog audio output
    • Output impedance < 800 Ohm
    • Output level (balanced) Max. 16 dBu
    • Frequency response 20 Hz to 20 kHz (+/-0.5 dB)
    • Dynamic range > 100 dB
    • Signal-to-noise ratio > 100 dB
    • THD + noise: < 0.01 % @ + 4 dBu, A-weighting
    • Crosstalk < -80 dB @ 20 kHz

      Mechanical specifications
    • Weight 0.44 kg (1 pound)
    • Dimensions (with rubber protection)
    • L = 164 mm (6.3 inches)
    • B = 82 mm (3.2 inches)
    • H = 51 mm (2.0 inches)
    • Dimensions (without rubber protection)
    • L = 151 mm (5.9 inches)
    • B = 66 mm (2.6 inches)
    • H = 41 mm (1.6 inches)
    • Operating environment Indoor
    • Operating temperature -5°C to +70°C
    • Storage temperature -40°C to +150°C
     

NA2-IO-DLINE - Required Accessories

    California Residents:
    WARNING:
    Cancer and Reproductive Harm - www.P65Warnings.ca.gov