Markertek - America's Broadcast Supply House

Call 800-522-2025
M-F 8:30am - 7pm EST

 

View As:

Sort By:

Display:

Analog Video Distribution Amplifiers & Splitters:

Page:

►►
    ◄◄
     
     
     
    • Marshall V-VL2122-01 Video / Audio / Power Over Single Coax System

      Marshall V-VL2122-01 Video / Audio / Power Over Single Coax System

      The V-VL2122-01 sends Audio, NTSC Video and Power over a single RG59 coax cable. Itworks with both color and B/W cameras and monitors. It is ideal for monitoring areas where no power is available to operate a camera.

      On the monitor side, the viewer part of the unit uses 18 to 24VDC (depending on length of coax). This voltage will go across the coax cable and the unit will output 12VDC on the sender side. Both the sender unit and the monitor unit has BNC connectors for the audio and video inputs a

         

        Read More

        Item #: MAR-V-VL2122-01

        Availability: Usually ships in 3-10 business days

        Our Price: $109.99

        Add to Wishlist
      • ESE DV-207 1x4 3G/HD/SD SDI Reclocking Distribution Amplifier

        ESE DV-207 1x4 3G/HD/SD SDI Reclocking Distribution Amplifier

        The DV-207 is an SDI digital video (3G, HD & SD) 1 x 4 Distribution Amplifier. The unit features high-performance & low-cost and is able to distribute 3Gb/s, 1.5Gb/s & 270Mb/s data rates. The DV-207 automatically detects the data rate and then re-clocks and equalizes the signal. The Distribution Amplifier can equalize 400m @ 270Mb/s, 200m @ 1.5Gb/s and 140m @ 3Gb/s of 1694A coax cable. A non-reclocked loop output is also provided. An external power supply is not required as the DV-207 is complet


         

        Read More

        Item #: ESE-DV207

        Availability: Direct Ship From Manufacturer

        Our Price: $375.49

        Add to Wishlist
      • Gefen EXT-DVI-148 1x8 DVI Distribution Amplifier

        Gefen EXT-DVI-148 1x8 DVI Distribution Amplifier

        The 1:8 DVI Distribution Amplifier is the perfect solution for anyone who needs to send one source of digital high definition video to multiple displays at the same time. It supports all DVI equipment, such as computers, HD-DVD players and satellite set top boxes and all DVI displays. DVI (digital visual interface) is a common connector used throughout the industry to connect digital video displays to video sources. In operation, the digital video source is connected to the distribution amplifie



             

            Read More

            Item #: EXT-DVI-148

            Availability: In Stock

            Our Price: $1,099.00

            Add to Wishlist
          • Kramer Electronics VP-123 1x3 DA Composite YC or Component

            Kramer Electronics VP-123 1x3 DA Composite YC or Component

            A pair of high performance 1x3 distribution amplifiers for RGBHV video signals. Each unit uses 5-BNC connectors for each output, however, the VP-123 uses 5-BNC inputs while the KR-VP123V uses a "VGA/XGA" HD15 connector. Each model has three high bandwidth analog video channels, Red, Green and Blue, that can be operated independently allowing them to be used for other video signal formats such as composite, Y/C and component (a breakout cable would be required for the KR-VP123V to input the desir

               

              Read More

              Item #: VP-123

              Availability: In Stock

              Our Price: $396.00

              Add to Wishlist
            • Kramer 105VB 1x5 Video DA with BNC

              Kramer 105VB 1x5 Video DA with BNC

              The Kramer 105VB is a high-performance distribution amplifier for composite video signals. It takes one input, provides correct buffering and isolation and distributes the signal to five identical outputs.

              • Bandwidth - 400MHz (-3dB)
              • Level Control
              • BNC Connectors
              • Rack Kit - RK-3T
              • INPUT: 1 composite video, 1Vpp/75Ω on a BNC connector.
              • OUTPUTS: 5 composite video, 1Vpp/75Ω on BNC connectors.
              • MAX. VIDEO OUTPUT: 2Vpp.
              • VIDEO BANDWIDTH (-3dB): 400MHz.
              • DIFF. GAIN: 0.1%.
              • DIFF. PHASE: 0.1 Deg.
              • K-FACTOR: <0.

               

              Read More

              Item #: KR-105VB

              Availability: In Stock

              Our Price: $144.00

              Add to Wishlist
            • Cobalt 9001 3G/HD/SD Reclocking Distribution Amplifier Card

              Cobalt 9001 3G/HD/SD Reclocking Distribution Amplifier Card

              The 9001 is a multi-rate SDI and ASI distribution amplifier capable of equalizing and reclocking 3G, HD, and SD signals. All outputs are non-inverted for reclocking of ASI signals.CB-9001Rear modules are sold separately as RM-9001-X for the 10-slot 8310 openGear frame, and RM20-9001-X for the 20-slot 8321 openGear frame. Also available is the RM20-9001-A/S high density split rear module (5 BNCs per module) for the 20-slot frame.

              RM20-9001-A: 8321 Frame Rear I/O Module (Standard Width) HD/SD-SDI I










                 

                Read More

                Item #: CB-9001

                Availability: Direct Ship From Manufacturer

                Our Price: $459.00

                Add to Wishlist
              • Gefen EXT-DVI-141DLBP DVI-DL Booster Plus

                Gefen EXT-DVI-141DLBP DVI-DL Booster Plus

                The DVI DL Booster Plus can extend a resolution of 2560 x 1600 up to 200 feet over standard copper dual-link DVI cables. In addition to far exceeding the typical 15 foot limitation imposed by copper cables, the Booster ensures that the video signal is free of distracting artifacts such as sparkles, static and lines. DDC signals are also strengthened to ensure that the communication channel between the display and the DVI source is robust and uninterrupted. The DVI DL Booster Plus is an excell



                     

                    Read More

                    Item #: EXT-DVI-141DLBP

                    Availability: In Stock

                    Our Price: $249.00

                    Add to Wishlist
                  • HDDA-2 HDTV 1x2 Component Video Distribution Amplifier

                    HDDA-2 HDTV 1x2 Component Video Distribution Amplifier

                    • HDTV Analog Distribution Amplifier (DA). An RGB/YPbPr (3-channel) Distribution Amplifier.
                    • Split any component video signal without degradation.
                    • Each output has its own High-Current Cable Driver.
                    • High current output IC's drive very long cables (> 300 degrees) easily. No interaction with other outputs.
                    • Will accept any analog input, Composite Video, Y/Pb/Pr or R/G/B at any scan rate and give you 2 identical High Bandwidth (200MHz) outputs.
                    • All Connectors are Gold Plated RCA.
                    • Great for Automotive video ap

                     

                    Read More

                    Item #: HDDA-2

                    Availability: Usually ships in 3-10 business days

                    Our Price: $64.00

                    Add to Wishlist
                  • 1x2 Composite Video Distribution Amplifier with BNC Connectors

                    1x2 Composite Video Distribution Amplifier with BNC Connectors

                    Provides two video outputs from one input to split video sources and drive signals up to 900 feet. A unique feature of this DA is the included power linking cable and port to power multiple units from the same power supply.

                    • Dual power - Operates on 12VDC or 24VAC
                    • Includes 12VDC power supply
                    • Video Bandwidth: 10Hz - 10MHz
                    • Video Input Level: 0.8'1.2 Vp-p @ 75 Ohms
                    • Video Output Level: 1Vp-p @ 75 ohms
                    • Includes surface mounting holes as well as surface mount hardware to both wood and drywall
                    • 3"W x 2"H x 2"D

                      N

                     

                    Read More

                    Item #: DEF-1X2DA

                    Availability: In Stock

                    Our Price: $33.60

                    Add to Wishlist
                  • Kramer PT-102VN 1X2 Video Distribution Amplifier

                    Kramer PT-102VN 1X2 Video Distribution Amplifier

                    The PT102VN is a composite or SDI video distribution amplifier. It will take one input, provide correct buffering and isolation and distribute the signal to two identical outputs.

                    It is the ideal companion to the model PT-102A audio Pico TOOL. A 12V power supply is included. The PT-102VN is part of the Kramer Pico TOOLS family of products for applications requiring uncompromising quality and compact size at an affordable price.

                    The PT-102S is a high performance video distribution amplifier for s-V

                         

                        Read More

                        Item #: PT102V

                        Availability: In Stock

                        Our Price: $88.00

                        Add to Wishlist
                      • Kramer 1x4 Composite Video Line Amp with Differential Input

                        Kramer 1x4 Composite Video Line Amp with Differential Input

                        The 104LN is a new version of our 104L high performance line amplifier which combines the functions of a distribution amplifier and a line driver. The 104LN has a differential input which helps to eliminate noise picked up by the input cable. It accepts a single composite video input and provides four identical buffered outputs with gain and equalization controls on the front panel. The gain and EQ controls, which compensate for signal losses inherent in long cable runs, are recessed and accessi

                           

                          Read More

                          Item #: KR-104LN

                          Availability: In Stock

                          Our Price: $144.00

                          Add to Wishlist
                        • Ensemble Designs BrightEye 41 Analog Video/AES/Tri-Level Sync Dist Amp

                          Ensemble Designs BrightEye 41 Analog Video/AES/Tri-Level Sync Dist Amp

                          The Ensemble Designs BrightEye 41 is a distribution amplifier that accepts analog video, AES digital audio, or HD Tri-Level Sync signal. It can also be used with SMPTE 310M, Dolby E and AC-3 signals. It provides unity gain fanout over a frequency range of DC to 10 MHz. It can handle composite and component analog video, coaxial AES digital audio, or a High Definition Tri-Level Sync signal.

                          When using a digital to analog video converter and multiple outputs are needed, BrightEye 41 can be used to





                             

                            Read More

                            Item #: ENDE-BE41

                            Availability: In Stock

                            Our Price: $234.00

                            Add to Wishlist
                          • CE Labs AV400 1x4 Composite Video & Stereo Audio RCA Distribution Amp

                            CE Labs AV400 1x4 Composite Video & Stereo Audio RCA Distribution Amp

                            High quality amplifier allows formultiple signal distribution equal to source signal output with no signal loss. Distribute audio, composite video and s-video television signals from a single A/V source to multiple television monitors. Daisy chain several units for larger displays with great picture quality.

                            • Heavy duty metal housing provides excellent shielding
                            • Allows up to 150 ft. runs
                            • Save the expense of additional A/V receivers
                            • VIDEO SPECIFICATIONS:
                            • Gain: 2 Volt unterminated, 1 Volt Terminated: 75


                             

                            Read More

                            Item #: CEL-AV400

                            Availability: Direct Ship From Manufacturer

                            Our Price: $56.80

                            Add to Wishlist
                          • Burst VDA-4 1x4 Video Distribution Amplifier

                            Burst VDA-4 1x4 Video Distribution Amplifier

                            Burst Electronics manufactures a series of Video Distribution Amplifiers. These units use the latest in high speed, monolithic operational amplifier technology. This results in wide bandwidth, high gain stability, low differential gain and phase. Models are available that range from MicroDA that will fit most anywhere to a 4 output version for Y/C (S-VHS/Hi8) applications.

                            All units contain internal regulated bipolar power supplies and are powered by external 12Vdc, perfect for field application

                               

                              Read More

                              Item #: VDA-4

                              Availability: Direct Ship From Manufacturer

                              Our Price: $199.25

                              Add to Wishlist
                            • VAC 11-511-104 1x4 Composite Video Distribution Amplifier

                              VAC 11-511-104 1x4 Composite Video Distribution Amplifier

                              1x4 Composite Video DA, Std. Input, Unity Gain, BNC Connectors, FlexPwr

                               

                              Read More

                              Item #: 11-511-104

                              Availability: Direct Ship From Manufacturer

                              Our Price: $285.76

                              Add to Wishlist
                            • Kramer VM-30AVB 1:3 Audio Video Distributor with BNC Connectors

                              Kramer VM-30AVB 1:3 Audio Video Distributor with BNC Connectors

                              The Kramer VM-30AVB is an exceptionally high performance 1:3 distribution amplifier for video and stereo audio signals.

                              The VM-30AVB uses BNC connectors for the video signals, and RCA connectors for the audio signals. The machine accepts one input and distributes the signal to three identical outputs. The VM-30AVB is typically used for composite video sources such as VCR's, cameras, etc., but video bandwidth exceeding 430MHz allows the machine to be used for high-resolution data/video signals, SD

                                 

                                Read More

                                Item #: VM-30AVB

                                Availability: Usually ships in 3-10 business days

                                Our Price: $192.00

                                Add to Wishlist
                              • Cobalt 9002 3G/HD/SD Non-Reclocking Distribution Amplifier Card

                                Cobalt 9002 3G/HD/SD Non-Reclocking Distribution Amplifier Card

                                The 9002 is a multi-rate SDI and ASI distribution amplifier capable of equalizing 3G, HD, and SD signals. All outputs are non-inverted for distribution of ASI signals.

                                Rear modules are sold separately as RM-9002-X for the 10-slot 8310 openGear frame, and RM20-9002-X for the 20-slot 8321 openGear frame. Also available is the RM20-9002-A/S high density split rear module (5 BNCs per module) for the 20-slot frame.

                                • Equalize up to 150m of Belden 1694A cable at 1.485 Gbit
                                • Automatic rate detection/display

                                   

                                  Read More

                                  Item #: CB-9002

                                  Availability: Direct Ship From Manufacturer

                                  Our Price: $369.00

                                  Add to Wishlist
                                • ESE 1x12 Video Distribution Amplifier

                                  ESE 1x12 Video Distribution Amplifier

                                  The ES-208 provides a loop-thru input and four isolated outputs, all accessible via BNC connectors. Screwdriver-adjustable Gain and Equalization controls are provided on the front of the case. Up to 1000 feet of cable may be compensated by adjusting the EQ trimmer. The Gain control provides an overall signal level adjustment of - 6 to +3.5 db. The DC Level control allows adjustment of the DC clamp level with respect to Ground. When the input is not looped thru to other equipment, a 75 ohm termin


                                     

                                    Read More

                                    Item #: ES 208

                                    Availability: Direct Ship From Manufacturer

                                    Our Price: $285.49

                                    Add to Wishlist
                                  • Magenta 9D 1 x 9 Distribution Amplifier for MultiView

                                    Magenta 9D 1 x 9 Distribution Amplifier for MultiView

                                    A key component for point to multi-point applications, the MultiView 9D splits the UTP output from any MultiView transmitter into 9 UTP outputs that can be connected to MultiView receivers, daisy chain of receivers, distribution amplifiers, or matrix switchers. The MultiView 9D supports all MultiView-`X' functionality1 and sustains the resolution and distance capabilities of the receivers when splitting the UTP signals.

                                    • Splits one UTP input into 9 UTP outputs
                                    • Supports all MultiView-`X' functionali

                                     

                                    Read More

                                    Item #: MGE-9D

                                    Availability: Usually ships in 3-10 business days

                                    Our Price: $645.00

                                    Add to Wishlist
                                  • Kramer VM-10HDXL 1:10 3G HD-SDI Distribution Amplifier

                                    Kramer VM-10HDXL 1:10 3G HD-SDI Distribution Amplifier

                                    The VM-10HDxl is a high-performance distribution amplifier for 3G HD-SDI signals. The unit takes one input, provides reclocking and equalization and distributes the signal to ten identical outputs.

                                    • Max. Data Rate - 3Gbps.
                                    • HDTV Compatible.
                                    • Multi-Standard Operation - SDI (SMPTE 259M/344M), HD-SDI (SMPTE 292M) & 3G HD-SDI (SMPTE 424M).
                                    • Kramer Equalization & re-Klocking™ Technology - Rebuilds the digital signal to travel longer distances.
                                    • HD-SDI & SDI Input Indication LEDs.
                                    • Looping Inp

                                       

                                      Read More

                                      Item #: KR-VM-10HDXL

                                      Availability: Usually ships in 3-10 business days

                                      Our Price: $1,368.00

                                      Add to Wishlist
                                    • ESE DV-201P2 Dual Rack Mount with 2 1x4 3G/HD/SD Reclocking DAs

                                      ESE DV-201P2 Dual Rack Mount with 2 1x4 3G/HD/SD Reclocking DAs

                                      The DV-201 is an SDI digital video (3G, HD & SD) 1 x 4 Distribution Amplifier. The unit features high-performance & low-cost and is able to distribute 3Gb/s, 1.5Gb/s & 270Mb/s data rates. The DV-201 automatically detects the data rate and then re-clocks and equalizes the signal. The Distribution Amplifier can equalize 400m @ 270Mb/s, 200m @ 1.5Gb/s and 140m @ 3Gb/s of 1694A coax cable. An external power supply is not required as the DV-201 is completely self-contained requiring only 117VAC or 22

                                         

                                        Read More

                                        Item #: ESE-DV-201P2

                                        Availability: Direct Ship From Manufacturer

                                        Our Price: $796.49

                                        Add to Wishlist
                                      • ESE ES-251 1x24 RS-232 Distribution Amplifier

                                        ESE ES-251 1x24 RS-232 Distribution Amplifier

                                        The ES-251 is an RS-232-C Isolation and Distribution Amplifier. Three 1 x 8 amplifier circuits allow the incoming signal to be distributed via the 24 outputs. The unit receives RS-232-C and buffers the signal so that each of the 24 outputs can drive a single "user" at a distance of up to 50 feet (per output). All inputs and outputs are via rear mounted terminal DB-9 connectors. The two main purposes of the ES-251 are to:

                                        1) improve the distribution capabilities of RS-232-C
                                        2) provide isolation be

                                           

                                          Read More

                                          Item #: ESE-251

                                          Availability: Direct Ship From Manufacturer

                                          Our Price: $1,420.49

                                          Add to Wishlist
                                        • ESE DV-212 1x12 3G/HD/SD SDI Digital Video Distribution Amplifier

                                          ESE DV-212 1x12 3G/HD/SD SDI Digital Video Distribution Amplifier

                                          The DV-212 is an SDI digital video (3G, HD & SD) 1 x 12 Distribution Amplifier. The unit features high-performance & low-cost and is able to distribute 3Gb/s, 1.5Gb/s & 270Mb/s data rates. The DV-212 automatically detects the data rate and then re-clocks and equalizes the signal. The Distribution Amplifier can equalize 400m @ 270Mb/s, 200m @ 1.5Gb/s and 140m @ 3Gb/s of 1694A coax cable. A non-reclocked loop output is also provided. An external power supply is not required as the DV-212 is comple


                                           

                                          Read More

                                          Item #: ESE-DV212

                                          Availability: Direct Ship From Manufacturer

                                          Our Price: $850.49

                                          Add to Wishlist
                                        • 1x4 Composite Video Distribution Amplifier with BNC Connectors

                                          1x4 Composite Video Distribution Amplifier with BNC Connectors

                                          1x4 Video Distribution Amplifier with BNC Connectors
                                          Provides four video outputs from one input to split video sources and drive signals up to 900 feet. It can be connected to a video camera, muliplexer, VCR or DVR. Power supply included.

                                          • Includes 12VDC power supply
                                          • Red LED Power Indicator
                                          • Video Bandwidth: 10Hz - 10MHz
                                          • Video Input Level: 0.8'1.2 Vp-p @ 75 Ohms
                                          • Video Output Level: 1Vp-p @ 75 ohms
                                          • Includes surface mounting holes as well as surface mount hardware to both wood and drywa

                                           

                                          Read More

                                          Item #: DEF-1X4DA

                                          Availability: In Stock

                                          Our Price: $54.95

                                          Add to Wishlist
                                        • Kramer 101L 1:1 Composite Video Line Amplifier

                                          Kramer 101L 1:1 Composite Video Line Amplifier

                                          The 101L is a high performance line amplifier for composite and other video signals. It provides controls to improve video level and image details ( Equalization ), compensating for signal loss inherent in long cable runs.

                                          • Bandwidth - 500MHz (-3dB)
                                          • Recessed Level (Gain) & EQ (Peaking) Controls
                                          • Kramer MultiTOOLS - 8 units can be rack mounted side-by-side in a 1U rack space.
                                          • INPUT: 1 composite video, 1Vpp/75Ω on a BNC connector.
                                          • OUTPUT: 1 composite video, 1Vpp/75Ω on a BNC connector.
                                          • MAX. OU

                                           

                                          Read More

                                          Item #: KR-101L

                                          Availability: Usually ships in 3-10 business days

                                          Our Price: $104.00

                                          Add to Wishlist
                                         

                                        Page:

                                        ►►
                                          ◄◄
                                           
                                           
                                           
                                           

                                          Analog Video Distribution Amplifiers & Splitters

                                          Composite, Component, S-Video, VGA,….If any of these words mean anything to you then you know the importance of Analog Video Distribution Amplifiers & Splitters. Although the world has gone digital, there is still lots of room left for legacy components that output the signals mentioned above. And if you're like many others, you still use those components so the need for solid and reliable Analog Video Distribution Amplifiers & Splitters is crucial. Schools, Houses Of Worship, Live Event Producers as well as post production facilities all know the benefits of a good DA or splitter for their presentations or productions. Markertek is second to none when it comes to Analog Video Distribution Amplifiers & Splitters. We carry the best brands and plenty of stock.