Narrow Results:

• 

  ATI ADA416 Ultra Low Noise - Quad 1x4 Analog Audio DA

  Exceptional performance and unfaltering dependability are the hallmark traits of the ADA416. Available exclusively with Phoenix connectors, the ADA416 is RF protected and eliminates noise from lossy splitters while driving long lines. Features: Sixteen balanced outputs divided among four independent channels Individual wide range audio output level controls Separate input and clipping LED’s for each 1x4 group Active balanced outputs with automatic ground sensing for connecting to...

  

  Read More

  Item #: ATI-ADA416

  Availability: More on the way, usually ships in 3-10 business days

  Our Price: $1,679.00

  Add to Wishlist
• 

  Cobalt Digital 9242 - 2x4 Analog Audio Distrubution Amp openGear Card

  The 9242 Analog Audio Distribution Amplifier with Remote Gain Control is a broadcast-quality balanced analog audio DA with stereo 2x4, mono 1x8, and stereo sum L+R x 8 selectable output modes. Unlike most analog audio DAs, the 9242 electronic attenuators allow overall gain (stereo ganged) and per-channel trim (offset) via DashBoard remote control. The space-saving design and very low power consumption of the 9242 provides for high density, allowing two cards to be collocated in adjacent slots and...

  

  Read More

  Item #: CB-9242

  Availability: More on the way, usually ships in 3-10 business days

  Our Price: $425.00

  Add to Wishlist
• 

  ATI ADA412-XLR Quad 1x3 Low Noise Analog Distribution Amplifier - XLR Connectors

  When you are searching for a solution to extensive audio problems, the ATI ADA412 can handle any issue you throw its way with strength and reliability. The ADA412 is RF protected and eliminates noise from lossy splitters while driving long lines. Features: Twelve balanced outputs divided among four independent channels. Individual wide range audio output level controls. Separate input and clipping LED's for each 1x3 group. Active balanced outputs with automatic ground sensing for connecting...

  

  Read More

  Item #: ATI-ADA412-XLR

  Availability: More on the way, usually ships in 3-10 business days

  Our Price: $1,695.00

  Add to Wishlist
• 

  RDL RU-MLD4 Microphone / Line Distribution Amplifier - 1x4

  The RU-MLD4 is a four channel audio distribution amplifier. The input and all four outputs may be connected through the front-panel XLR jacks or on the rear panel detachable terminal blocks. The input accepts either a balanced microphone or line level signal. Each of the four outputs provides either a microphone or line level signal. Both the front-panel XLR connectors and the rear-panel terminals are active at all times. The RU-MLD4 may be rack-mounted with the XLR jacks facing forward, or may...

  

  Read More

  Item #: RU-MLD4

  Availability: In Stock

  Our Price: $267.23

  Add to Wishlist
• 

  RDL TX-A2D Dual Audio Converter - Balanced to Unbalanced

  The TX-A2D is the ideal choice in installations requiring passive isolation and level attenuation between a professional balanced line-level stereo source and consumer equipment unbalanced inputs. The TX-A2D is a complete unbalanced stereo line-level audio output module. The front panel provides a detachable terminal block for connecting each channel of a balanced +4 dBu audio source. The input signals are coupled to two front-panel gold plated phono jacks through studio-quality isolation transformers....

  

  Read More

  Item #: RDL-TX-A2D

  Availability: In Stock

  Our Price: $107.64

  Add to Wishlist
• 

  US Audio DA-2 Distribution Amp

  In normal (stereo) mode, the Whirlwind/US Audio DA-2 provides four outputs per each of two inputs. A front panel COMBINE switch applies both inputs to all 8 outputs, where the DA-2 becomes a one or two in, eight out DA. Each output is ground lifted and has its own level control and clip indicator light. Input signals are monitored by signal-present LEDs and clip LEDs. The headphone circuit can be switched to monitor either channel. All audio connections are made through actively balanced...

  

  Read More

  Item #: DA-2

  Availability: In Stock

  Our Price: $555.00

  Add to Wishlist
• 

  ATI ADA 206-XLR Dual 1x3 Low Noise Analog Audio Distribution Amplifier - XLR Connectors

  The DA206 is ideal for every application and every budget. Avoid RF and hum pick-up problems from noisy, lossy splitters. Prevent hard-to-find shorts from multiple taps on critical lines. Boost console outputs. Drive long lines. Eliminate rolloffs and distortion from mismatched load impedances and enjoy the maximum versatility that this unit provides. The DA206 gives you two inputs, each driving a master input gain adjustment and three individual output level trimmers. All outputs...

  

  Read More

  Item #: ATI-ADA-206-XLR

  Availability: More on the way, usually ships in 3-10 business days

  Our Price: $1,299.00

  Add to Wishlist
• 

  RDL ST-DA3 Line Level Distribution Amplifier - 1x3

  The ST-DA3 gives you the advantages of an audio distribution amplifier PLUS you can put it where you need it. The ST-DA3 allows bridging of any audio line, adjusting the gain, and driving up to three high or low impedance, balanced or unbalanced loads. The ST-DA3's wideband circuitry produces the unsurpassed pure clarity, low-distortion and low-noise for which RDL products are known. The ST-DA3 features RDL's SupplyFlex power input configuration. The module will operate directly from floating...

  

  Read More

  Item #: ST-DA3

  Availability: In Stock

  Our Price: $142.43

  Add to Wishlist
• 

  Kramer 1x10 Mono or Dual 1x5 Stereo Balanced Audio Distribution Amp

  The VM-1110xl is a high performance distribution amplifier for balanced mono audio signals on XLR connectors. It can be configured as a 1x5 distribution amplifier for stereo balanced audio signals. Features: Level (Gain) Controls. Dual Mode - Configure as 1:10 (mono) or 1:5 (stereo) DA. S/N Ratio - 89.3dB. Standard 19" Rack Mount Size - 1U. Specifications: INPUTS: 2 balanced stereo audio, +4dBu/50kΩ on XLR (F) connectors. OUTPUTS: 10 balanced stereo audio, +4dBu/50Ω on XLR (M) connectors....

  

  Read More

  Item #: VM-1110XL

  Availability: More on the way, usually ships in 3-10 business days

  Our Price: $580.00

  Add to Wishlist
• 

  Cobalt RM20-9242-B 20-Slot OpenFrame Rear I/O Module (Standard) 2 Balanced Analog Audio In / 8 Balanced Analog Audio Out

  The Colbalt RM20-9242-B Analog Audio Distribution Amplifier with Remote Gain Control is a broadcast-quality balanced analog audio DA with stereo 2x4, mono 1x8, and stereo sum L+R x 8 selectable output modes. Unlike most analog audio DAs, the 9242 electronic attenuators allow overall gain (stereo ganged) and per-channel trim (offset) via DashBoardT remote control. The space-saving design and very low power consumption of the 9242 provides for high density, allowing two cards to be collocated...

  

  Read More

  Item #: CB-RM20-9242-B

  Availability: More on the way, usually ships in 3-10 business days

  Our Price: $215.00

  Add to Wishlist
• 

  Kramer VM-3AN 1x3 Balanced Audio Distribution Amplifier

  The VM-3AN is a high-performance distribution amplifier for balanced stereo audio signals. The unit takes one stereo input and distributes the signal to three identical outputs. Features: S/N Ratio - 90dB L & R Level (Gain) Controls Compact Kramer TOOLS - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter Specifications: INPUT:1 balanced audio stereo on 5-pin terminal blocks OUTPUTS: 3 balanced audio stereo on 5-pin...

  

  Read More

  Item #: KR-VM3AN

  Availability: Extended Lead Time. Email, Chat or Call Us for more details.

  Our Price: $156.00

  Add to Wishlist
• 

  RDL TX-A2 Balanced to Unbalanced Audio Converter Zoom Rooms compatible

  The TX-A2 is the ideal choice in installations requiring passive isolation and level attenuation between a professional balanced line-level mono source and consumer equipment unbalanced inputs. The TX-A2 is a complete unbalanced line-level audio output module. The front panel provides a detachable terminal block for connection of a balanced +4 dBu audio source. The input signal is coupled to two front-panel gold plated RCA jacks through a studio-quality isolation transformer. Each output is coupled...

  

  Read More

  Item #: RDL-TX-A2

  Availability: In Stock

  Our Price: $90.43

  Add to Wishlist
• 

  Cobalt RM20-9242-D/S 20-Slot OpenGear Frame Rear I/O Module - Supports 2 Cards - Dual 1x4 Balanced Analog Audio I/O

  The RM20-9242-D/S is a 20-Slot Frame Rear I/O Module (Split) Dual 1x4 Balanced Analog Audio I/O (per card). Note: Outputs 2-1 thru 2-4 are outputs 1-5 thru 1-8 when card used in mono DA or mono mix DA mode. The 9242 Analog Audio Distribution Amplifier with Remote Gain Control is a broadcast-quality balanced analog audio DA with stereo 2x4, mono 1x8, and stereo sum L+R x 8 selectable output modes. Unlike most analog audio DAs, the 9242 electronic attenuators allow...

  

  Read More

  Item #: CB-RM20-9242-DS

  Availability: More on the way, usually ships in 3-10 business days

  Our Price: $193.95

  Add to Wishlist
• 

  SoundTools CATBOX-FX Four Female XLR Audio Over CAT5 Stage Box w/ etherCON Connectors - Use Shielded CAT5 Cable

  The SoundTools CAT Box FX Stage Box allows four lines of balanced analog audio to be run down a shielded CAT5, CAT5e, CAT6 or CAT7 cable. Each CAT Box stage box has an etherCON input and an etherCON parallel output that allows the CAT Box to be used as a hard-wire split. You can run 4 stereo AES lines down a single shielded CAT5/5e/6 cable for a longer distance AES signal. CAT5e is superior for carrying AES signals over longer distances than conventional 4-channel audio snakes. The...

  

  Read More

  Item #: CATBOX-FX

  Availability: In Stock

  Our Price: $120.00

  Add to Wishlist
• 

  ETS PA872 Balanced Analog Audio - Screw Terminal to RJ45 Pins 1 - 2 & 3 - 6

  The ETS PA872 Stereo Balanced Audio Adapter and the PA874 Dual Balanced Stereo Audio Adapter enable sending 2 or 4 audio signals down a single run of UTP (utilizing 2 or 4 pairs) without having to use a "hydra" assembly. Additionally, the PA874 allows sending bidirectional stereo audio over a single UTP run. Features: Full audio bandwidth Minimizes spurious signal ingress Eliminates ground loops Compact plastic case Made in USA 100% tested Specifications: Bandwidth:...

  

  Read More

  Item #: ETS-PA872

  Availability: More on the way, usually ships in 3-10 business days

  Our Price: $88.77

  Add to Wishlist
• 

  Ensemble Designs BrightEye 33 Analog Audio Distribution Amplifier

  BrightEye 33 is a high performance audio distribution amplifier for the broadcast and recording industry. Exceptional performance features include excellent response, noise and distortion specifications. BrightEye 33 functions with either 8 mono outputs or 4 stereo outputs. Additionally, BrightEye 33 can be used to distribute LTC. Gain adjustments are accessed from the front panel. This is a simple device with no USB port and no interface to BrightEye Mac or PC software. Power supply...

  

  Read More

  Item #: ENDE-BE33

  Availability: In Stock

  Our Price: $261.25

  Add to Wishlist
• 

  ATX Networks CA-50/550 550MHz CATV High-Gain Headend Distribution Amplifier

  The Tru Spec ATX Network CA-50/550 is a high quality push-pull wall-mounted distribution amplifier producing signals with extremely low-noise and harmonic distortion. This amplifier is capable of 78 channel operation over the 54-550MHz range, and makes an excellent distribution system amplifier in MDU, CATV, and SMATV systems. Because of its extremely low-noise figure and low distortion, the CA50/550 is ideally suited for use in larger networks where amplifier cascading is required....

  

  Read More

  Item #: PM-CA-50-550

  Availability: In Stock

  Our Price: $129.99

  Add to Wishlist
• 

  Matrix Switch MSC-AES/SPDIF4 AES/SPDIF 4 Output Digital Audio Distribution Amplifier

  Matrix Switch Corporation distribution amplifiers combine exceptional performance with value. Their compact size allows for them to be utilized in space constrained situations and all external connections are on the same side making for a clean installation. The MSC-AES/SPDIF4 is specifically designed for 75 ohm digital audio distribution. It features a wide range input circuit which will accept any level from 100MV P-P up to 5V P-P to produce four individually buffered 1V P-P outputs. Features:...

  

  Read More

  Item #: MSC-AES/SPDIF4

  Availability: More on the way, usually ships in 3-10 business days

  Our Price: $132.00

  Add to Wishlist
• 

  Radio Design Labs RU-ADA4D 4 Channel Stereo Audio Distribution Amplifier

  The RU-ADA4D is a four channel stereo audio distribution amplifier with input and output gain adjustments and input level metering. The module may be operated in mono to provide up to eight distributed mono signals. The inputs and outputs are connected on rear-panel detachable terminal blocks. Each of the two line level inputs accepts either a balanced or an unbalanced signal. Each input is equipped with a front panel INPUT GAIN trimmer. Input signal levels between -14 dBV unbalanced and +9 dBu...

  

  Read More

  Item #: RDL-RU-ADA4D

  Availability: More on the way, usually ships in 3-10 business days

  Our Price: $241.49

  Add to Wishlist
• 

  Palmer Audio PDACCAPO Re-Amplification Box

  A Reamping box is mainly used in studios, with this box you can play back a recorded guitar signal (or any other instrument signal) and send it to an amplifier where it is picked up by microphones and recorded again. This way the recording engineer can experiment with the sound of an instrument. The Daccapo takes care of all impedance matching issues and also eliminates ground loop humming thanks to the use of a Transformer. The signal level to the amplifier can also be adjusted with a level pot....

  

  Read More

  Item #: PLM-PDACCAPO

  Availability: Extended Lead Time. Email, Chat or Call Us for more details.

  Our Price: $89.99

  Add to Wishlist
• 

  RDL RU-UDA4 Stereo Audio Distribution Amplifier - 2x4 - RCA Jacks

  The RU-UDA4 is the optimum choice where connectorized, unbalanced line-level distribution is needed. This unit features two separate, isolated channels. The RU-UDA4 may be used in stereo applications, or as two individual monaural distribution amplifiers. The input signals are buffered through output line drivers, providing four separate line-level unbalanced outputs for each of the two inputs. The RU-UDA4 performance is tailored around industry standard -10 dBV input/output levels. Excellent...

  

  Read More

  Item #: RU-UDA4

  Availability: More on the way, usually ships in 3-10 business days

  Our Price: $174.67

  Add to Wishlist
• 

  Kramer 106 1:2 Microphone to Line Distribution Amplifier

  The 106 is a high-quality distribution amplifier for balanced mono microphone signals. It takes one dynamic or condenser microphone input and distributes the signal to two line-level outputs. Features: Mic Input - Condenser or Dynamic Phantom Power - 48V DC S/N Ratio - 81dB Level Controls Connectors - Terminal Blocks Rack Kit - RK-3T Size - TOOLS Specifications: INPUT: 1 balanced mono microphone on a 3-pin terminal block connector. OUTPUTS: 2 balanced mono line outputs on 3-pin terminal...

  

  Read More

  Item #: KR-106

  Availability: More on the way, usually ships in 3-10 business days

  Our Price: $148.00

  Add to Wishlist
• 

  Kramer 105A 1x5 Audio Distribution Amplifier w/ 3.5m conn

  The KRAMER 105A is a high quality, state-of-the-art 1x5 Stereo-Audio / Balanced mono Distribution Amplifier designed for studios, shops, showrooms and other demanding applications. The 105A splits a single audio stereo or balanced mono input source into five identical outputs. The 105A uses an external 12V DC power source, and therefore is suitable for field work as well. The 105A machine is the perfect "audio partner" of the 105V/105S Video/Super-Video DAs. Specifications: INPUT: 1 Stereo-Audio...

  

  Read More

  Item #: KR-105A

  Availability: More on the way, usually ships in 3-10 business days

  Our Price: $144.00

  Add to Wishlist
• 

  RDL EZ-ADA4 1x4 Stereo Audio Distribution Amplifier

  The EZ series offers unparalleled flexibility. Each unit is fully labeled on the front and rear for use either as a finished product or as a utility module. Installation of multiple products is quick and easy using the comprehensive range of EZ rack mounts, chassis, bezels, drawers and accessories. High quality full-size switches, long life controls, quality connectors, solid-state audio and video switching, gold plating and superior engineering combine to make EZ the best value in the industry....

  

  Read More

  Item #: EZ-ADA4

  Availability: In Stock

  Our Price: $138.27

  Add to Wishlist
• 

  RDL STM-DA3 Microphone Level Distribution Amplifier - 1x3

  The STM-DA3 is designed for use in quality commercial sound, broadcast and recording applications. The 1.2 k Ohm balanced input accepts a wide variety of microphone input levels without loading professional low impedance microphones. A multi-turn trimmer is user adjustable for either gain or loss in order to match the facility standard microphone levels. Three balanced outputs provide nearly total isolation between the output lines. Unlike mic-splitting transformer systems, the STM-DA3 also provides...

  

  Read More

  Item #: STM-DA3

  Availability: More on the way, usually ships in 3-10 business days

  Our Price: $136.61

  Add to Wishlist

Newsletter Sign Up

Weekly email with exclusive deals, unique new products, how-to videos and so much more!

Download the Newest Catalog!

• A Must for all Broadcast & AV Professionals
• Exclusive & Custom Solutions
• The Best New Products
• Latest Industry Trends