-
Item# CB-9242
The 9242 Analog Audio Distribution Amplifier with Remote Gain Control is a broadcast-quality balanced analog audio DA with stereo 2x4, mono 1x8, and stereo sum L+R x 8 selectable output modes. Unlike most analog audio DAs, the 9242 electronic attenuators allow overall gain (stereo ganged) and per-channel trim (offset) via DashBoard remote control.
The space-saving design and very low power consumption of the 9242 provides for high density, allowing two cards to be collocated in adjacent slots and...

-
Item# CB-RM20-9242-DS
The RM20-9242-D/S is a 20-Slot Frame Rear I/O Module (Split) Dual 1x4 Balanced Analog Audio I/O (per card).
Note: Outputs 2-1 thru 2-4 are outputs 1-5 thru 1-8 when card used in mono DA or mono mix DA mode.
The 9242 Analog Audio Distribution Amplifier with Remote Gain Control is a broadcast-quality balanced analog audio DA with stereo 2x4, mono 1x8, and stereo sum L+R x 8 selectable output modes. Unlike most analog audio DAs, the 9242 electronic attenuators allow...

-
Item# CB-9241
The 9241 is an analog audio distribution amplifier with up to eight low-impedance outputs designed for broadcast use. It can be used as either a mono or two-channel (stereo) audio DA. The 9241 can provide eight copies of a single (mono) input signal or four copies each of the two (stereo) inputs.
The 9241 has the ability to sum two channels for creating a mono mix. It can also detect dead-air silence and set an alarm when no audio is present.
Rear modules are sold separately as RM-9241-X for...

Our Price: $589.00
Special Price: $372.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# CB-RM20-9242-B
The Colbalt RM20-9242-B Analog Audio Distribution Amplifier with Remote Gain Control is a broadcast-quality balanced analog audio DA with stereo 2x4, mono 1x8, and stereo sum L+R x 8 selectable output modes. Unlike most analog audio DAs, the 9242 electronic attenuators allow overall gain (stereo ganged) and per-channel trim (offset) via DashBoardT remote control.
The space-saving design and very low power consumption of the 9242 provides for high density, allowing two cards to be collocated...

-
Item# CB-RM20-9257-A
Rear I/O Module for the Cobalt Digital 9257 1x9 MADI Audio Distribution Amplifier card.Single channel MADI in with 9 MADI outputs all on standard BNC coax connectors. The 9257 1x9 MADI Audio Distribution Amplifier provides an award-winning card-based solution for distribution of AES10 MADI signals. The card supports sampling frequencies up to 96 kHz, with a 64-channel payload supported at the industry standard 48 kHz sampling rate (all other sampling rates specified as valid per...

-
Item# CB-RM20-9257-B
Cobalt Digital RM20-9257-B/S-HDBNC is a 20-Slot Frame Rear I/O Module with (Split) Dual MADI Input (HD-BNC), 9 MADI Outputs (HD-BNC) per card.

Our Price: $298.99
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# CB-RM20-9262-BS
The RM20-9262-B/S is a rear module option for the 9262 openGear card ONLY! It features digital-to-analog audio conversion as well as provides 1x4 AES/EBU DA. It supports audio sampling frequencies from 30 kHz to 192 kHz, and converts the incoming AES digital audio signal to a stereo balanced analog audio signal pair using 24-bit conversion. Cable equalization and reclocking techniques enable the 9262 to reliably recover incoming digital audio signals over large cable lengths.
Features: 24-bit...
