Attero Tech unDNEMO-BT 64 Channel Network Monitor with USB and BlueTooth

ITEM #: ATEC-UNDNEMO-BT MFG #: UNDNEMO-BT

Primary Image
  • Product Image Thumbnail 1 of 2
  • Product Image Thumbnail 2 of 2

This item is no longer available.
Ask a Markertek Expert if you need assistance finding an appropriate substitute.

(800) 522-2025Email

Items similar to the ATEC-UNDNEMO-BT

UNDNEMO-BT - Overview

The Attero Tech unDNEMO-BT Bluetooth® Dante™ Network Monitor is an audio monitoring solution aimed at providing end users with a simple solution for selection and monitoring of up to 64 Dante™ audio channels. The unDNEMO-BT can also be used as a hands free USB soft-conferencing device. The addition of full duplex Bluetooth® audio connectivity allows Bluetooth® headsets to be used with the unDNEMO-BT for wireless listening. The unDNEMO-BT has two network connections to allow Dante™ Daisy chaining. The Windows-hosted unIFY GUI is available for system setup, and can select any names for the audio flows to replace the native Dante™ flow names if desired. The unDNEMO-BT is powered by either external +24VDC or any PoE network switch.

  • Features:

    • BlueTooth audio connectivity for BT headsets (unDNEMO-BT only)
    • Easy user monitoring of up to 64 Dante channels through built-in speaker or headphone interface
    • Daisy chaining for Dante audio data
    • Powered by either IEEE 802.3af PoE or a +24VDC from an external supply
    • Intuitive user interface and USB driverless connectivity
    • See Accessories section of the catalog for the Sennheiser MC Pro 2 UC Bluetooth headset for use with the unDNEMO-BT
     

  • Specifications:

      Audio Inputs
    • Input Types: Internal electret microphone
    • External electret headset microphone connectivity with internal bias (3.5mm T-S)
    • Line Input: 3.5mm TRS
    • Input Impedance: Line Input: 10kOhm
    • Maximum Input Levels: Line Input: +12dBu
    • Mic Bias Voltage: 1.65V

      Audio Input Performance
    • THD+N: Line Input: <0.02% @ 1kHz
    • Frequency Response: Line Input: 20Hz - 20kHz, +/- 1dB

      Audio Outputs
    • Speaker Type: Internal 1" Driver
    • Attenuation Range Software controlled volume (1 to 10(max), 6dB per step)
    • Headphone Output Stereo 3.5mm TRS
    • Maximum Output Levels: Speaker: 1W @ max volume
    • Headphone: 1Vrms into 32 Ohms (minimum load)

      Audio Output Performance
    • THD+N: <0.01% @ 1kHz, input signal 3dB below maximum
    • Frequency Response Headphone: 20Hz - 20kHz +/- 1dB

      Bluetooth® Audio (unDNEMO-BT Only)
    • Supported Bluetooth® Profiles Bluetooth® v3.0
    • A2DP (Headphone and bridging modes)
    • HSP (Headset mode)
    • Bluetooth® range 10 meters typical

      Dante® Network
    • Physical Level: Ethernet
    • Connector(s): Dual RJ-45
    • Cable Quality: CAT-5e or better
    • Transmission Speed: 1000 Mbps
    • Supported Sample Rates 48kHz
    • Minimum Dante® Network Latency 1ms

      Power Requirements
    • PoE 802.3af PoE PD compliant
    • External Power 24V DC, center positive barrel jack, 6.0mm OD / 2.0mm ID
    • Power Consumption < 6W Max
    • Cable Quality: CAT-5e or better

      Product Compliance
    • FCC CFR 47 Parts 15B, ICES-003, CE (EN55022), RoHS, REACH

      Physical Dimensions
    • Width: 6.45"
    • Height: 2.6"
    • Depth: 6.23"
    • Weight: 1.13 lbs

      Environmental Specifications
    • Operating Temperature 0 to 40 C
     

  • Warranty:

    • 5 Year
     

Required Accessories

UNDNEMO-BT - Required Accessories

    Recommended Accessories

    Similar Products

    California Residents:
    WARNING:
    Cancer and Reproductive Harm - www.P65Warnings.ca.gov