Thor F-MININODE-2RP-HP CATV Receiver and Return Path Transmitter

F-MININODE-2RP-HP - Overview

F-MININODE-2RP-HP - Overview

• Features:

  • Excellent optical AGC control when the input optical power range is -9~ + 2dBm, the output level, CTB and CSO basically unchanged
  • Downlink working frequency extended to 1GHz, RF amplifier has high performance and low power consumption GaAs chip, the highest output level up to 112dBæV
  • EQ and ATT both use a professional electric control circuit which allows control for an accurate operation that is convenient
  • Built-in ethernet transponder supports remote network management (optional);
  • Compact structure and easy installation, it's the premeire choice equipment of FTTB CATV networks
  • Built-in highly reliable and low power consumption power supply, or select external power supply(optional)
   

• Specifications:

  • Optical Parameters
  • Receiving Optical Power: -9~+2 dBm
  • Optical Return Loss: >45 dB
  • Optical Receiving Wavelength: 1100~1600 nm
  • Optical Connector Type: SC/APC
    IMPORTANT NOTE***(it is very important to interface our unit with SC/APC - Angle Polished Connector to avoid any light reflections.
    If your fiber is terminated with the SC, ST, FC /PC flat connector, you need to use an optical jumper from PC type to SC/APC for proper conversion.
  • Fiber Type: Single Mode
    
    Link Parameters
  • C/N: 51 dB
  • C/CTB: ≥60 dB
  • C/CSO: ≥60 dB
    
    RF Parameters
  • Frequency Range: MHz 45 ~860/1003
  • Flatness in Band: dB ±0.75
  • Rated Output Level: dBæV ≥ 108
  • Max Output Level: dBpV
    
    General
  • Power Voltage: A: AC (150~265)V - D: DC 12V/1A External power supply
  • Operating Temperature: -40~140°F
  • Consumption: VA ≤ 8
  • Dimension (LxWxH): 7.48 x 4.33 x 2.04 Inches
   

F-MININODE-2RP-HP - Required Accessories

F-MININODE-2RP-HP - Recommended Accessories

F-MININODE-2RP-HP - Attachments